Tag: annovi reverberi pumps

Posted on

AR ( Annovi Reverberi ) RSV3G35D-F40 TRIPLEX PRESSURE WASHER PUMP

AR (Annovi Reverberi) RSV3G35D-F40 TRIPLEX PRESSURE WASHER PUMP

The RSV3G35D-F40 AR (Annovi Reverberi) Pressure Washer  Pump

3 GPM @ 3500 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!
AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP
3.0 GPM    3500 PSI    INLET 3/8″ FPT  OUTLET 3/8” MPT1”  SHAFT    GAS ENGINE FLANGE   BUILT IN UNLOADER VALVE

COVERED BY AR FIVE YEAR WARRANTY

The Annovi Reverberi RSV3G35D-F40 Plunger Pumps are designed for a wide variety of high pressure washing applications. These Annovi Reverberi RSV3G35D-F40 Pressure Washer Pumps are constructed of die-cast bodies and feature a forged brass head. The internal components of the RSV3G35D-F40 include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over-sized tapered roller bearings and the precision supports in the RSV3G35D-F40 assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods on this RSV3G35D-F40 are either a special alloy aluminum or bronze over-sized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.

RSV3G35D-F40 Annovi Reverberi Pressure Washer Pump

 

The specification for the Annovi Reverberi RSV3G35D-F40 are:

  • Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
  • Bolts: Eight 6mm grade 8.8.
  • Plungers: Ceramic coated stainless steel.
  • Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
  • Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
  • eliminates the crankshaft from floating.
  • Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
  • Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • Oil Seals: All are constructed of Buna-N rubber.
  • Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
  • Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

List Price: $654.05
Our Price: $409.64
You save $244.41!

•Items NOT INCLUDED with your RSV3G35D-F40 pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
•The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
•PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
•The INLET WATER FILTER will catch most small debris before it enters your pump
•The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
•The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
•PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
Posted on

Annovi reverberi AR RSV3G25D-F25 TRIPLEX PRESSURE WASHER PUMP

The RSV3G25D-F25 AR (Annovi Reverberi) Pressure Washer Pump 3 GPM @ 2500 PSI, 3/4″ Hollow Shaft – Great for most 5 and 5-1/2 HP Gas Engines with a straight shaft!

AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP

3.0 GPM 2500 PSI INLET 3/8″ FPT OUTLET 3/8” MPT

3/4” SHAFT WITH GAS ENGINE FLANGE BUILT IN UNLOADER VALVE

COVERED BY AR FIVE YEAR WARRANTY

REPLACEMENT FOR DEVILBISS PK16642

Annovi Reverberi Plunger Pumps are designed for a wide variety of high pressure washing applications. The RSV3G25d-F25 is constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These Annovi Reverberi pressure washer pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.

RSV3G25D-F25 Annovi Reverberi Pressure Washer Pump

The Technical Specification for the Annovi Reverberi RSV3G25D-F25 Pressure Washer Pump are:

  • Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
  • Bolts: Eight 6mm grade 8.8.
  • Plungers: Ceramic coated stainless steel.
  • Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
  • Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
  • eliminates the crankshaft from floating.
  • Valves, Seats, and Springs: Stainless steel with specially designed Ultra Form TM cages to provide long life and positive seating.
  • Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • Oil Seals: All are constructed of Buna-N rubber.
  • Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
  • Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

List Price: $625.93
Our Price: $392.32
You save $233.61!


Availability:: Usually Ships in 24 hours.

Click Here for the RSV3G25D-F25 Annovi Reverberi Pressure Washer Pump Breakdown in PDF.

Posted on

AR – Annovi Reverberi SHP22.50N Pressure Washer Pump

The SHP22.50N AR (Annovi Reverberi) Pump 5.8 GPM @ 7250 PSI
Annovi Reverberi / AR North America SHP22.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F.

The Annovi Reverberi SHP22.50N Pressure Washer Pump Features:

  • High efficiency forged brass head & valve caps
  • Oversized “SKF” bearings are tapered for maximum life and load disbursement
  • Plungers are a special aluminum oxide blend, solid ceramic for long life

Specifications for the SHP22.50N Annovi Reverberi Pressure Washer Pump are:

  • Max. Volume: 5.8 GPM
  • Max. Discharge Pressure: 7,250 PSI
  • Max. Pump Speed: 1,450 RPM
  • Shaft Diameter: 24mm Solid
  • Max. Horsepower Requirements: 27.0 EBHP
  • Max. Fluid Temp.: 140° F.
  • Inlet Ports (2): 1/2″ Female
  • Outlet Ports (2): 3/8″ Female
  • Oil capacity: 32 oz
  • Weight: 29.0 lb.
SHP22.50N Annovi Reverberi Pressure Washer Pump

List Price: $2,853.82
Our Price: $1,763.81 
You save $1,090.01!

Accessories for the SHP22.50N Annovi Reverberi Pump…

•Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
•The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
•PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
•The INLET WATER FILTER will catch most small debris before it enters your pump
•The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
•The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
•PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

SHP22.50N Pump Parts Breakdown can be seen by Clicking Here.


Posted on

AR ( ANNOVI REVERBERI ) RSV2.5G25D-F25 TRIPLEX PRESSURE WASHER PUMP

The RSV2.5G25D-F25 AR (Annovi Reverberi) Pump 2.5 GPM @ 2500 PSI, 3/4″ Hollow Shaft – Great for most 5 and 5-1/2 HP Gas Engines with a straight shaft!

AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP
2.5 GPM 2500 PSI INLET 3/8″ FPT OUTLET 3/8” MPT
3/4” SHAFT WITH GAS ENGINE FLANGE BUILT IN UNLOADER VALVE

The AR – Annovi Reverberi RSV2.5G25D-F25 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These Annovi Reverberi RSV2.5G25D-F25 pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.

RSVF2.5G25D-F25 Annovi Reverberi Pressure Washer Pump

Specifications for the Annovi Reverberi RSV2.5G25D-F25 Plunger Pump are:

  • Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
  • Bolts: Eight 6mm grade 8.8.
  • Plungers: Ceramic coated stainless steel.
  • Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
  • Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
  • eliminates the crankshaft from floating.
  • Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
  • Seals and V-Packings: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • Oil Seals: All are constructed of Buna-N rubber.
  • Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
  • Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

List Price: $625.93
Our Price: $392.32 
You save $233.61!

Parts Breakdown for the RSV2.5G25D-F25 can be found by Clicking Here.
Posted on

AR – ANNOVI REVERBERI SHP15.50N Pressure Washer Pump

This SHP15.50N AR (Annovi Reverberi) Pressure Washer Pump Features:

  • High efficiency forged brass head & valve caps
  • Oversized “SKF” bearings are tapered for maximum life and load disbursement
  • Plungers are a special aluminum oxide blend, solid ceramic for long life

The Specifications for the Annovi Reverberi SHP15.50N Pressure Washer Pump are:

  • Max. Volume: 3.96 GPM
  • Max. Discharge Pressure: 7,250 PSI
  • Max. Pump Speed: 1,450 RPM
  • Shaft Diameter: 24mm Solid
  • Max. Horsepower Requirements: 20.0 EBHP
  • Max. Fluid Temp.: 140° F.
  • Inlet Ports (2): 1/2″ Female
  • Outlet Ports (2): 3/8″ Female
  • Oil capacity: 32 oz
  • Weight: 29.0 lb.
Annovi Reverberi SHP15.50N Pressure Washer Pump

SHP15.50N AR (Annovi Reverberi) Pump 3.96 GPM @ 7250 PSI Annovi Reverberi / AR North America SHP15.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F.

List Price: $2,853.82
Our Price: $1,763.81
You save $1,090.01!

Parts Breakdown for this SHP15.50N AR – Annovi Reverberi Pressure Washer Pump can be found by Clicking Here.

Posted on

SHP Series Pumps from Annovi Reverberi

Annovi Reverberi SHP Series Pressure Washer Pumps – These AR (Annovi Reverberi) Plunger Pumps are designed with a new high efficincy brass pantented manifold. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium SKF tapered roller bearings and the precision die-cast supports assure proper shaft alignment and maximum life. Valve cages of Ultra-Form provide positive seating and extended life, especially designed for high pressure applications. Two-piece connecting rods are a special alloy aluminum-based material oversized for maximum strength and load disbursement. These Annovi Reverberi pressure washer pumps are designed for gearbox flex coupled or belt drive systems with a 24mm solid crankshaft. Flows: 3.96 to 5.8 GPM Pressure to: 7250 PSI Speeds: 1450 rpm Shaft Styles: Solid Shaft 24mm.

Click Here for the Annovi Reverberi SHP Series Pressure Washer Pump Part Breakdown.

 

SHP15.50N Annovi reverberi SHP22.50N Annovi reverberi
List Price: $2,853.82
Our Price: $1,763.81
You save $1,090.01!
List Price: $2,853.82
Our Price: $1,763.81
You save $1,090.01!
SHP15.50N AR (Annovi Reverberi) Pump 3.96 GPM @ 7250 PSI
Annovi Reverberi / AR North America SHP15.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F. 		SHP22.50N AR (Annovi Reverberi) Pump 5.8 GPM @ 7250 PSI
Annovi Reverberi / AR North America SHP22.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F.
Posted on

Annovi Reverberi RS Series Pressure Washer Pumps

Annovi Reverberi RS Series Pressure Washer Pumps – The Annovi Reverberi RSV series are designed to direct drive on gasoline engines ranging from 5 – 13 h.p. Intended use for medium to heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance of 4 gpm at 4,000 psi. The Annovi Reverberi RSV series Pressure Washer Pump features a compact and efficient intergraded unloader valve and fixed chemical injector. The RSV is a result of our combined 60 years of pumps building experience and expertise. Flows: 2.5 to 4 GPM Pressure to: 4000 PSI Speeds: 3400 rpm Shaft Styles: Hollow Shaft 3/4″ and 1″.

RSV2.5G25D-F25 Annovi reverberi Pressure Washer Pump RSV3G25D-F25 Annovi reverberi Pressure Washer Pump
List Price: $625.93
Our Price: $392.32
You save $233.61!
List Price: $625.93
Our Price: $392.32
You save $233.61!
RSV2.5G25D-F25 AR (Annovi Reverberi) Pump 2.5 GPM @ 2500 PSI, 3/4″ Hollow Shaft – Great for most 5 and 5-1/2 HP Gas Engines with a straight shaft! RSV3G25D-F25 AR (Annovi Reverberi) Pump 3 GPM @ 2500 PSI, 3/4″ Hollow Shaft – Great for most 5 and 5-1/2 HP Gas Engines with a straight shaft!
RSV3G35D-F40 3 GPM @ 3500 PSI RSV4G30D-F40 4 GPM @ 3000 PSI
List Price: $654.05
Our Price: $409.64
You save $244.41!
List Price: $654.05
Our Price: $409.64
You save $244.41!
RSV3G35D-F40 AR (Annovi Reverberi) Pump 3 GPM @ 3500 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft! RSV4G30D-F40 AR (Annovi Reverberi) Pump 4 GPM @ 3000 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!
RSV4G40D-F40 Annovi reverberi Pressure Washer Pump RSV3.5G35D-F40 Annovi reverberi Pressure Washer Pump
List Price: $673.67
Our Price: $421.71
You save $251.96!
List Price: $673.67
Our Price: $421.71
You save $251.96!
RSV4G40D-F40 AR (Annovi Reverberi) Pump 4 GPM @ 4000 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft! RSV3.5G35D-F40 AR (Annovi Reverberi) Pump 3.5 GPM @ 3500 PSI, 1″ Hollow Shaft – Great for most 6 to 9 HP Gas Engines with a straight shaft!
Posted on

Annovi Reverberi SXW Series Pumps

Annovi Reverberi SXW Series Pressure Washer Pumps – Plunger Pumps are designed for high-pressure  industrial washing applications. These Annovi Reverberi pressure washer pumps are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. These pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft. Flows: 3.96 to 7 GPM Pressure to: 5100 PSI Speeds: 1450, 1750 rpm Shaft Styles: Solid Shaft 24mm

SXW15.35 Annovi reverberi Pressure Washer Pump SXW21.35 Annovi reverberi Pressure Washer Pump
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
SXW15.35 AR (Annovi Reverberi) Pump 3.96 GPM @ 5100 PSI SXW21.35 AR (Annovi Reverberi) Pump 5.55 GPM @ 5100 PSI
SXWA4G50 Annovi reverberi Pressure Washer Pump SXWA5.5G50 Annovi reverberi Pressure Washer Pump
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
SXWA4G50 AR (Annovi Reverberi) Pump 4 GPM @ 5000 PSI SXWA5.5G50 AR (Annovi Reverberi) Pump 5.5 GPM @ 5000 PSI
SXWA7G50 Annovi reverberi Pressure Washer Pump
List Price: $1,543.61
Our Price: $957.24
You save $586.37!
SXWA7G50 AR (Annovi Reverberi) Pump 7 GPM @ 5000 PSI
Posted on

RK Stainless Steel Pressure Washer Pumps from Annovi Reverberi

RK Stainless Steel Series

RK Stainless Steel Series Pressure Washer Pumps from Annovi Reverberi – In high frequency and long time operation, high accurate manufacturing technique is the only answer to the durable reputation Annovi Reverberi pumps. The S.S. Series uses include various applications such as reverse osmosis water desalination, seal gland flushing and waste water odor control. S.S. Series feature a SAE 316 stainless steel manifold this is totally corrosion-resistance. Special pumps features include our highly concentric bearing positioning on both sides of the crankcase, anticorrosion coated aluminum die cast crankcase, continuously lubricated Viton seals, triple lip loaded oils seals and our ultra thick ceramic plungers that will not crack under extreme variable temperature conditions. Flows: 2.3 to 4.2 GPM Pressure to: 2500 PSI Speeds: 1450, 1750 rpm, Shaft Styles: Solid Shaft 24mm, Hollow Shaft 5/8″ and 1-1/8″ .

Pump Breakdown for RK1450rpm Annovi Reverberi Pressure Washer Pump
Pump Breakdown for RKA1750rpm Annovi Reverberi Pressure Washer Pump
Pump Breakdown for RKV3400rpm Annovi Reverberi Pressure Washer Pump

 

RK-SS11.11NAnnovi reverberi RK-SS13.17NAnnovi reverberi
List Price: $3,023.57
Our Price: $1,868.31
You save $1,155.26!
List Price: $3,023.57
Our Price: $1,868.31
You save $1,155.26!
RK-SS11.11N AR (Annovi Reverberi) Pump 2.9 GPM @ 1600 PSI RK-SS13.17N AR (Annovi Reverberi) Pump 3.43 GPM @ 2500 PSI
RK-SS15.15NAnnovi reverberi RKA-SS2.3G15N*Annovi reverberi
List Price: $3,023.57
Our Price: $1,868.31
You save $1,155.26!
List Price: $3,023.57
Our Price: $1,868.31
You save $1,155.26!
RK-SS15.15N AR (Annovi Reverberi) Pump 3.96 GPM @ 2200 PSI RKA-SS2.3G15N* AR (Annovi Reverberi) Pump 2.3 GPM @ 1500 PSI
RKA-SS3.6G12N*Annovi reverberi RKA-SS2.3G15E-F33Annovi reverberi
List Price: $3,023.57
Our Price: $1,868.31
You save $1,155.26!
List Price: $3,168.91
Our Price: $1,957.77
You save $1,211.14!
RKA-SS3.6G12N* AR (Annovi Reverberi) Pump 3.6 GPM @ 1500 PSI RKA-SS2.3G15E-F33 AR (Annovi Reverberi) Pump 2.3 GPM @ 1500 PSI
RKA-SS3G15E-F33Annovi reverberi RKA-SS3.6G12E-F33Annovi reverberi
List Price: $3,168.91
Our Price: $1,957.77
You save $1,211.14!
List Price: $3,168.91
Our Price: $1,957.77
You save $1,211.14!
RKA-SS3G15E-F33 AR (Annovi Reverberi) Pump 3 GPM @ 1500 PSI RKA-SS3.6G12E-F33 AR (Annovi Reverberi) Pump 3.6 GPM @ 1500 PSI
RKA-SS4.2G15E-F33Annovi reverberi RKA-SS2.3G15E-F17Annovi reverberi
List Price: $3,168.91
Our Price: $1,957.77
You save $1,211.14!
List Price: $3,168.91
Our Price: $1,957.77
You save $1,211.14!
RKA-SS4.2G15E-F33 AR (Annovi Reverberi) Pump 4.2 GPM @ 1500 PSI RKA-SS2.3G15E-F17 AR (Annovi Reverberi) Pump 2.3 GPM @ 1500 PSI
RKA-SS3G15E-F17Annovi reverberi RKA-SS3.6G12E-F17Annovi reverberi
List Price: $3,168.91
Our Price: $1,957.77
You save $1,211.14!
List Price: $3,168.91
Our Price: $1,957.77
You save $1,211.14!
RKA-SS3G15E-F17 AR (Annovi Reverberi) Pump 3 GPM @ 1500 PSI RKA-SS3.6G12E-F17 AR (Annovi Reverberi) Pump 3.6 GPM @ 1500 PSI
RKA-SS4.2G15E-F17Annovi reverberi
List Price: $3,168.91
Our Price: $1,957.77
You save $1,211.14!
RKA-SS4.2G15E-F17 AR (Annovi Reverberi) Pump 4.2 GPM @ 1500 PSI

Click to Purchase any Annovi Reverberi RK Stainless Steel Pressure Washer Pump

Posted on

Annovi Reverberi XM / SXM Series Pumps – XMV3G27D-F25

XM / SXM Series Pumps – Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems. Flows: 2.9 to 4 GPM Pressure to: 3500 PSI Speeds: 1450, 1750, 3400 rpm Shaft Styles: Solid Shaft 24mm, 3/4″, Hollow Shaft 5/8″, 3/4″ 1″, 1-1/8″, Tapere.

PUMP MADE READY
FULLY PLUMBED AR XMV3G27D-F25

PUMPS MADE READY ARE NOT TESTED PRIOR TO SHIPPING.  THE UNLOADER AND PRESSURE RELIEF VALVE MAY NEED ADJUSTING BEFORE USAGE.  TESTING IS AVAILABLE ON 3400 RPM PUMPS MADE READY.

Features