Tag: pressure washer

RSV4G40 – PKG Pump Package from Annovi Reverberi

Order the RSV4G40 – PKG from Annovi Reverberi Online.

The RSV4G40 pump package from Annovi Reverberi comes with everything you need to get your pressure washer back up and running.  The RSV4G40 – pkg is rated 4 gallons per minute with a maximum pressure of 4000 PSI.  This package is set up to connect directly to your gasoline powered pressure washer with its standard gas flange, and the RSV4G40HDF40EZ pump that comes as part of this package spins at a very powerful 3400 RPM.  This kit was put together by AR Pumps with ease in mind.  They are giving your the 4 GPM pump, which has a built in unloader and easy start valve, all the connection pieces and even a detergent hose with its filter, so basically everything you will need.  As with most AR pumps this RSV4G40 pump package is built to last with a forged brass head and solid ceramic plungers, it will give you years of service before it needs replacing.

A few other things you may need to know about the RSV4G40-pkg:

• The AR7365 – 3/8″M nipple connector.
• An AR7366 – 3/4″F nut connector.
• Inlet filter part number AR7369.
• A quick connect coupler AL-QC3/8B.

If you already own this RSV4G40 pump package or the pump itself the RSV4G40HDF40EZ, and need repair parts and kits for it you can find those on the pumps breakdown that came with your unit.  If you lost that manual and need to reprint it you can do so by clicking here.

Do you still have some concerns if this is the right replacement pressure washer pump for your machine?  Why don’t you just give us a call, and we will help you determine the correct item for your type of machine and work you are doing with it.  1-877-824-7763 {Smart Phones Click to Call}

Absolutely sure this is the right deal for you? The order this pump package on our online store below.

Order the RSV4G40 – PKG from Annovi Reverberi Online.

XMA2.5G18E-F33 Pump from Annovi Reverberi

Order the XMA2.5G18E-F33 pump from Annovi Reverberi.

The XMA2.5G18E-F33 is a 1750 RPM replacement pump from AR Pumps.  The XMA2.5G18E-F33 has a 2.5 Gallon per minute flow rate and a maximum PSI of 1800.  This is one of those Annovi Reverberi pumps that has been known to go by many other names on the market.  It’s been known to be called the XMA2.5G, XMA2.5G18, XMA2.5G18E, XMA, XMA25, XMA25G, XMA25G18, XMA25G18E and the XMA25G18E-F33.  Regardless of how it is identified, this is constructed like all the XM series of pumps with solid ceramic plungers, over sized bearings and forged brass heads to ensure longevity in the harsh conditions most pressure washers come up against. 

A few more specifications you may need before you purchase the XMA2.5G18E-F33 pump:

• The unit has a 140° maximum liquid temperature that it can pump.
• This pump has a  weight of 15 pounds and an oil capacity of 14 oz.
• If you run metric the LPM is 9.5 and the BAR would be 120.
• EBHP power rating of 3 is standard on this XMA2.5G18E-F33 pump.
• The inlet and discharge threads are the standard measuring in at 1/2″ female and 3/8″ female respectively.
• Stroke and bore are also industry standard, measuring in at 10.6mm and 15mm each.

If you already own an XMA2.5G18E-F33 pump and need parts to get it up and running for your business and workers, we sell all those parts and kits as well.  Click here to download and print off the official parts breakdown for this pump.

We are here to help you decide if you should replace or repair your pumps on your pressure washers.  Give one of our knowledgeable staff a call and we will guide you through the process of determining the best options for you and your business. Call 1-877-824-7763 {Smart Phones Click to Call}

Or you can order the replacement pump online by clicking below.

Order the XMA2.5G18E-F33 pump from Annovi Reverberi.

SJV3G27D-EZ pump replacement from Annovi Reverberi.

Order the SJV3G27D-EZ from AR Pumps Online.

The SJV3G27D-EZ is a standard replacement pump for your pressure washer.  This SJV3G27D-EZ pump has a flow rate of 3 gallons per minute or 11.4 liters per minute with a maximum PSI of 2700, that would be 186 BAR.  If your pressure washer can handle those specifications and can handle a pump that spins at 3400 RPM then this is the perfectly priced and one of the most well built replacement pumps you can buy today.  This pump comes with a lot of built in features making it almost a true bolt and go style of pressure washer pump.  The unloader comes already installed and the chemical injector also comes standard, and can be either fixed or of the adjustable type.  The SJV3G27D-EZ is designed to install easily on any gasoline powered pressure washer engine that utilizes a 3/4″ hollow shaft, and has a horse power rating of between 3.5 and 6.5.

A few other features you may need to know about the  SJV3G27D-EZ pump:

• The crankcase oil capacity on the unit is 4.5 oz.
• Inlet and discharge threads on this pump are 1/2″ and 3/8″ male type connections.
• The weight in pounds on this SJV3G27D-EZ pump is 11.
• This pump has an EBPH power rating of 5.2.
• The stroke and bore of the item is 6.8mm and 15mm respectively.
• A 140° maximum water or chemical temperature can be pumped through the unit.

Should you already own a SJV3G27D-EZ pump from Annovi Reverberi, and just need to repair it, we have everything you need to do that as well.  First you will need to know what parts you want to replace on the unit.  Go to the pumps, parts breakdown page here and see which parts you will need.  Then either call us at 1-877-824-7763 {Smart Phones Click to Call} or go online and order all the parts and kits you need.

If you wish to order this powerful pump you can do so online by clicking below.

Order the SJV3G27D-EZ from AR Pumps Online.

Spotlight on the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8

Features of the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8:

• Direct Drive with electric flange
• 5/8″ Shaft Diameter
• Die-cast body and brass head
• Plungers – solid ceramic titanium impregnated for extended pump life
• Crankcase – oversized die cast aluminum with special cooling fins
• Bearings – premium tapered roller bearings
• Valves, seats and springs – stainless steel with ultraform cages
• Plunger rods – high strength stainless steel.
• Connecting rods – oversized one piece special alloy to assure proper plunger alignment

Specifications of the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8:

• Max GPM………………3
• Max LMP…………………………11.4
• Max PSI………………….2200
• Max Bar………………………….152
• Power EBHP……………4.5
• Bore Dia. mm…………………….18
• Stroke mm……………….9.6
• Weight Lbs………………………..11
• Max Temp……………….140°
• Oil Capacity………………………10oz
• Inlet Thread ……………1/2”F
• Discharge Thread……………….3/8”F

 

XTA3G22E-F8 AR (Annovi Reverberi) Pump 3 GPM @ 2200 PSI @ 1750 RPM, XTA1750rpm.

XTA3G22E-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. The XTA3G22E-F8 has One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, over sized for strength and load disbursement.

Click here for the Parts Breakdown of the XTA3G22E-F8 Pressure Washer Pump

• Items NOT INCLUDED with your XTA3G22E-F8 Plunger Pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
• The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your XTA3G22E-F8 Plunger Pump (saving you the trouble of rebuilding your pump)
• PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
• The INLET WATER FILTER will catch most small debris before it enters your XTA3G22E-F8 Plunger Pump
• The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
• The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your XTA3G22E-F8 Plunger Pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
• PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

 

List Price: $696.75 Our Price: $355.24 Click here to order this pump You save $341.51!

SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: XTA3G22E-F8
Price subject to change on the XTA3G22E-F8 Pressure Washer Pump from Annovi Reverberi

Spotlight on the XTA4G15EBA-F8 Annovi Reverberi Pressure Washer Pump.

Technical Specifications of the XTA4G15EBA-F8:

• Max GPM………………4
• Max LMP…………………………15
• Max PSI………………….1500
• Max Bar………………………….103
• Power EBHP……………4
• Bore Dia. mm…………………….18
• Stroke mm……………….12.8
• Weight Lbs………………………..11
• Max Temp……………….140°
• Oil Capacity……………………… 8oz
• Inlet Thread ……………1/2”F
• Discharge Thread……………….3/8”F

Features of the XTA4G15EBA-F8:

• Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety, performance.
•  Inlet and Discharge Ports: Heavy bosses for added strength.
•  Offset Discharge Ports: High efficiency, smooth flow.
• Bolts: Six Bolts, 6mm, grade 12.9.
• Ultra Form Cages: Durability, strength and long life.
• Poppets, Seat and Spring: 303 and 400 series stainless steel.
• Valve Caps: Machined brass – greater strength.
• High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
• Low Pressure Seals: “U” cup double lip Buna-N. Good positive seal.
• Support Guides: Machined brass one-piece construction to assure proper plunger alignment and to maximize packing and seal life.
• Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
• Bearings: Over sized for maximum life and load disbursement, two ball bearings on the solid shaft series and a needle bearing on the drive side and ball on the non-drive side for the hollow shaft series. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
• Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
• Rear Cover: Precision die-cast, precision punched gasket sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
• Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
• Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
• Connection Rods: One piece special alloy aluminum based and bronze, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
• Crankshaft: Forged one-piece, precision ground and hardened for extremely long life and durability.
• Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
• Oil Capacity: Flat cover 8 oz. and extended cover 10 oz.
• Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
• Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
• Hot Water: High temperature kits are available to 180º F. Refer to breakdown.
• Wet End Repair: Very simple no special tools are required.
• Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
• Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

 

Click here for the Parts Breakdown of this XTA4G15EBA-F8 Pump

 

XTA4G15EBA-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, over sized for strength and load disbursement.

 

 Service manual for the XTA4G15EBA-F8 Pressure Washer Pump Click here.

Items NOT INCLUDED with your pump that you may need:

1. Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
2. The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
3. PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
4. The INLET WATER FILTER will catch most small debris before it enters your pump
5. The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
6. The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
7. PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

 

 

List Price: $681.74

Our Price: $426.69 Click here to order this pressure washer pump from Annovi Reverberi

You save $255.05!

Availability:: In Stock
Product Code: XTA4G15EBA-F8
Price Subject to change on the XTA4G15EBA-F8

 

Spotlight on the SJV2.5G27D-F7 AR Annovi Reverberi Pressure Washer Pump.

Technical Specifications of this SJV2.5G27D-F7 Pressure Washer Pump:

Features of this SJV2.5G27D-F7 Pressure Washer Pump:

• – Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
• – Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
• – Bolts: Three bolts, 10mm, grade 8.8.
• – Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
• – Poppets, Seat and Spring: 303 and 400 series stainless steel.
• – Valve Caps: Machined brass for greater strength.
• – High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
• – Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
• – Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
• – Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
• Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
• Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
• Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
• Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
• Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
• Oil Capacity: 4.5 oz.
• Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
• Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
• Wet End Repair: Very simple no special tools required.
• Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
• Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

The AR SJV2.5G27D-F7 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life.  This SJV2.5G27D-F7 pump has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.

Recommended Accessories / Additional Info:

• NOT INCLUDED with your SJV2.5G27D-F7 pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
• The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
• PRESSURE REGULATOR / UNLOADER – if we list one to the right of the SJV2.5G27D-F7 pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
• The INLET WATER FILTER will catch most small debris before it enters your pump
• The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
• The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your SJV2.5G27D-F7 pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
• PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

SHIPPING: Item Ships in 1 to 7 Days

Availability:: In Stock
Product Code: ARWP-RTR-SJV2.5G27D-F7
price subject to change  on the SJV2.5G27D-F7