Spotlight on the KF Series Left handed KF35AL Pressure Washer Pump from General Pumps.
General Pumps – KF36AL – Pressure washer pump
Features of the KF36AL left handed pressure washer pump from General Pumps:
GPM 36.2
PSI 2050
RPM 900
The KF36AL pump has been designed to pump fresh and filtered (360 micron max.) water at room temperature. Special versions are available for pumping water up to 185F and for reverse osmosis units.
The water temperature is critical for the pump life: the higher the water temperature, the more likely it is to create cavitation, resulting in premature seal and valve failures. For such conditions, use HT series pumps.
SHIPPING: Item Ships in 1 to 7 Days Availability:: In Stock Product Code:KF36AL
Price subject to change on this pressure washer pump from General Pumps – KF36AL
Spotlight on the SH27003VH Mobile Pressure Washer Skid
SH27003VH Mobile Pressure Washer Skid
Features of this SH27003VH Mobile Pressure Washer Skid:
The SH27003VH Series Pressure Washer is a highly portable machine with a small footprint, ideal for use where electric power is not available. The industry trusted electric-start 6.5 Briggs & Stratton engine provides power to the Comet pump and thermostatically controlled 12 VDC Beckett burner. The engine on this SH27003VH mobile pressure washer has a 20 Amp charging circuit. A down-stream injector gives the user hot soap control from the gun. The stainless steel wrapped 1/2″ SCH 80 steel coil heats the water up to 250F. You will experience extended burner run time with the larger 8 gallon diesel tank. The rugged powder coated frame has a lift point, integrated hose hooks and a big pneumatic wheel kit is included for portability. The SH27003VH Mobile Pressure Washer Skid is complete with gun/wand, 50′ high pressure hose, quick connect nozzles, down-stream injector and adjustable thermostat. Requires group 24 550 CCA battery, not included
Crankcase Capacity …………………………………………..21 oz. (0.6 L)
Pulley Mounting ………………………………………….Either side (Either side)
Shaft Diameter………………………………………………….0.787″ (20 mm)
CAT Pump 390 – 5 Frame Piston Pump
The CAT Pump 390 has Superior Design
•Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
• Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
•Mechanically actuated inlet valves give strong lift and easy prime.
•Precision design 304 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life.
•Oil bath crankcase assures optimum lubrication.
•100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
This CAT Pump 390 uses Quality Materials
•Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
•Chrome plated, brass manifolds for strength and corrosion resistance.
•Special high strength TNM connecting rods offer superior bearing quality strength.
•Chrome-moly crankshaft gives unmatched strength and surface hardness.
•Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
The CAT Pump 390 has Easy Maintenance
•Stepped stainless steel piston rod with chrome-plated, stainless steel sleeve allows easy replacement from front of pump.
•All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
•Wear parts are available in convenient kits.
Notice to CAT Pumps Customers Only
Orders containing CAT Parts, Kits or Accessories (NOT PUMPS)
Require 7 to 10 day lead time regardless of shipping option chosen.
Faster Delivery times are available by calling 1-877-824-7763 ext. 126 or 130.
Availability:: In Stock Product Code:390
Price subject to change on thie CAT Pump 390
A Spotlight on the XMA4G20N Pressure Washer Pump from Annovi Reverberi.
XMA4G20N Pressure Washer Pump from Annovi Reverberi
The Technical Specifications of the XMA4G20N Pressure Washer Pump:
Max GPM………………4
Max PSI………………….2000
Power EBHP……………5.5
Bore Dia. mm…………………….18
Stroke mm……………….13.2
Weight Lbs………………………..14
Max Temp……………….140°
Oil Capacity………………………14.5oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F
The Features on this XMA4G20N Pressure Washer Pump:
This XMA4G20N Pressure Washer Pump has Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
Inlet and Discharge Ports: Heavy bosses for added strength.
Offset Discharge Ports: High efficiency, smooth flow.
The Bolts on the XMA4G20N Pressure Washer Pump: Eight bolts, 6mm, grade 12.9.
Ultra Form Cages: Durability, strength and long life.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps of this XMA4G20N Pressure Washer Pump: Machined brass – greater strength.
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
The Plungers on the XMA4G20N Pressure Washer Pump: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
The XMA4G20N Pressure Washer Pump has a Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity of the XMA4G20N Pressure Washer Pump: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available on the XMA4G20N Pressure Washer Pump to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
XMA4G20N AR (Annovi Reverberi) Pump 4 GPM @ 2000 PSI. AR pumps are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.
Additional Info on the XMA4G20N Pressure Washer Pump:
Items NOT INCLUDED with your XMA4G20N pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD of the XMA4G20N will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE on this XMA4G20N will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
Features of the RMV2.5G30-EZ Annovi Reverberi Pressure Washer Pump:
Manifold: High strength forged brass for long term use.
Bolts: Three 6mm cadmium plated steel.
Plungers: Hardened stainless steel.
Valves: Stainless steel poppet, seat and cage, stainless steel spring.
Seals: Buna-N dual seals.
Bearings: Premium over sized ball and needle bearings.
Crankshaft: Precision die-cast, with cooling fins for maximum heat dissipation. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
This RMV2.5G30-EZ plunger pump will pump up to 2.5 GPM at 3000 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 1.1 – 5.5 HP engines. The hollow shafted RMV2.5G30-EZ pump includes a built-in pressure control valve, and chemical injection system.
You save $100.79! Availability:: available for order Product Code:RMV2.5G30-EZ
Price subject to change on the RMV2.5G30-EZ pressure washer pump from Annovi Reverberi
Spotlight on the XMV3G30D-F24 Pressure Washer Pump.
XMV3G30D-F24 3GPM 3000PSI 1″ GAS FLANGE:
XMV3G30D-F24 Pressure Washer Pump.
Technical Specifications of the XMV3G30D-F24 Pressure Washer Pump:
Triplex Plunger Pump
Direct Drive with Gas Flange
Maximum Volume: 3.0 GPM
Maximum Discharge Pressure: 3000 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Shaft Diameter: 1″ ID with gas flange
Weight: 19 lb.
This XMV3G30D-F24 Pressure Washer Pump Features:
Manifold: High strength forged brass for long term use
Bolts: Eight 6mm grade 12.9
Plungers: Special thick solid ceramic for long life, strong durability and more resilience
Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in postion on the crankshaft and crankcase by snap rings.
Valves, Seats and Springs: Stainless steel with specially designed Ultra form material valve cages that impervious to water absorption and provide long life and positive seating
Seal and V-packings: Continuously lubricating for extended life
Plunger Rods: are high strength stainless steel
Connecting Rods: One piece special alloy aluminum based, over sized for maximum strength, load disbursement, and long life.
You save $266.06! Availability:: available for order Product Code:6501.0059.00
Price subject to change on the 6501.0059.00 AXD 2527 G-T Pressure Washer Pump
You save $1,806.61! CALL 1-877-824-7763 for More information Availability:: available for order Product Code: HPW3050-OEP
Price on the HPW3050-OEP subject to change
Spotlight on the Annovi Reverberi / AR North America XMV3G27D-F25 pump.
Annovi Reverberi / AR North America XMV3G27D-F25 pump.
This XMV3G27D-F25 Version with F25 flange series pumps are designed to direct drive on gasoline
engines ranging from 5 – 7 HP. The XMV3G27D-F25 pump Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components on the XMV3G27D-F25 pump include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. The XMV3G27D-F25 pump has over sized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drives this XMV3G27D-F25 pump. One-piece connecting rods are special alloy aluminum, over sized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems.
Technical Specifications of this XMV3G27D-F25:
Triplex Plunger Pump
Direct Drive with Gas Flange 3-6.5 HP SAE
Max. Volume: 3.0 GPM
Max. Discharge Pressure: 2,700 PSI
Max. Pump Speed: 3400 RPM
Shaft Diameter: 3/4” Hollow
Max. Horsepower Requirements: 7.3 GHP
Max. Fluid Temp.: 160 degrees F.
Inlet Ports (2): 1/2″ BSP
Discharge Ports (2): 3/8″ BSP
Drive Side: Standard right
Forged brass head & valve covers
Solid ceramic plungers
Weight: 19.0 lb.
The XMV3G27D-F25 pump Features:
Manifold: High strength forged brass for long term use
Bolts: Eight 6mm grade 12.9
Plungers: Special thick solid ceramic for long life, strong durability and more resilience
Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings.
Valves, Seats and Springs: Stainless steel with specially designed Ultra form material valve cages that impervious to water absorption and provide long life and positive seating
Seal and V-packings: Continuously lubricating for extended life
Plunger Rods: are high strength stainless steel
Connecting Rods: One piece special alloy aluminum based, over sized for maximum strength, load disbursement, and long life.
