Spotlight on the Giant Pressure Washer / Car Wash Pump LP700.
The Giant Pump LP700 is Ideal for Car wash, Pressure Wash, Sewer Cleaning, Reverse Osmosis, Water Blasting and much more. The Giant Pump LP700 is Designed for pulley drive or direct-drive applications. All Giant Pump LP700 feature a 5-Year warranty in car wash and pressure wash applications. Lifetime warranty on manifolds due to erosion or freezing.
The Giant Pressure Washer / Car Wash Pump LP700 Features:
Forged crankshafts
Tapered roller bearings
Bronze connecting rods
Ceramic plungers
Brass or Aluminum/Bronze fluid ends
Corrosion-resistant Hastelloy valves
Stainless steel and brass wetted parts
Rated to 160° F., higher temperature seals are available
Die Cast Aluminum crankcases.
Giant Pressure Washer / Car Wash Pump LP700
Notes: Rail kits are shown on this Giant Pressure Washer / Car Wash Pump LP700, but must be ordered separately if needed. Also, pumps have female NPT ports unless noted. BSP thread adapters are available if required.
The Giant Pressure Washer / Car Wash Pump LP700 has the following specifications:
Triplex Plunger Pump
MAX 7.9 GPM, 7250 PSI, 1000 RPM (35mm Shaft)
FPT Inlet: 3/4″
FPT Outlet: 1/2″
Uses Rail Kit No. 7357 (Not Included)
List Price: $15,140.00 Our Price: $11,650.23 You save $3,489.77! Availability:: available for order Product Code: GIANT-LP700
Giant Pump LP700
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE GIANT PRESSURE WASHER / CAR WASH PUMP LP700 12/12/2011
Below are parts and kits for the LP700 PRICE SUBJECT TO CHANGE. PRICE VALID ON ALL PARTS 12/12/2011
Spotlight on the 753-C Steam Jenny 750 PSI at 3.0GPM Pressure Washer / 70 GPH Steam Cleaner.
The 753-C Steam Jenny Combination Units demonstrate the culmination of advanced engineering, state of the art manufacturing, and extensive steam cleaner and pressure washer experience dating back to its inception in 1927 by Jenny. These 753-C Steam Jenny units combine an extensive list of standard features with rugged strength and versatility.
1-1/2 HP 110 Volt, 60 Hertz, 1 Phase Motor
Ground Fault Circuit Interrupter
7.7 Gallon Fule Tanks
750 PSI at 3.0GPM Pressure Washer
70 GPH Steam Cleaner
The 753-C Steam Jenny 750 PSI at 3.0GPM Pressure Washer / 70 GPH Steam Cleaner Features:
The 753-C Steam Jenny 750 PSI at 3.0GPM Pressure Washer / 70 GPH Steam Cleaner has the following specifications:
Pressure Wash – Pressure – PSI 750
Pressure Wash – Volume-GPM 3.0
Pressure Wash – Temperature Rise Up to 140 °F
Steam Cleaner – Pressure-PSI 100-200
Steam Cleaner – Volume – GPH 70
Steam Cleaner – Temperature 325 °F
Electric Motor 1-1/2 HP
753-C Steam Jenny115 Volt – 1 Phase with GFCI Standard
753-C Steam Jenny230 Volt – 1 Phase with GFCI Optional
230 Volt – 3 Phase N/A
460 Volt – 3 Phase N/A
575 Volt – 3 Phase N/A
Gasoline Engine N/A
Burner Type Jenny Twin Fire Modular Gun Burner
24 Volt Intrinsically Safe Control Voltage Standard
Fuel Capacity 7.7 Gallons
Solution Capacity Separate Container
List Price: $4,385.00 Our Price: $3,225.00 You save $1,160.00! Availability:: available for order Product Code: 753-C
Steam Jenny Pressure Washer CALL 1-877-824-7763 EXT 124 for More information
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE 753-C Steam Jenny 750 PSI at 3.0GPM Pressure Washer / 70 GPH Steam Cleaner 12/09/2011
Spotlight on Annovi Reverberi Pressure Washer Pump XWL41.21N.
The IPF Annovi reverberi Pressure Washer Pump XWL41.21N features a 24mm solid shaft, operates at 1450 RPM, and has a max PSI of 3000.
Annovi reverberi Pressure Washer Pump XWL41.21N is designed for high-pressure industrial washing applications. The Annovi reverberi Pressure Washer Pump XWL41.21N is constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components of the Annovi reverberi Pressure Washer Pump XWL41.21N include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. The Annovi reverberi Pressure Washer Pump XWL41.21N is designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft.
List Price: $1,607.26 Our Price: $996.42 You save $610.84!
Annovi reverberi Pressure Washer Pump XWL41.21N
The Annovi reverberi Pressure Washer Pump XWL41.21N Features:
Annovi Reverberi / AR North America XWL41.21N Triplex Plunger Pump
Solid Shaft for Belt or Gear Drive
Max. Horsepower Requirements: 22.2 EBHP
Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
Max. Fluid Temp.: 140° F.
Inlet Ports (2): 3/4″ female
Discharge Ports (2): 3/8″ female
Drive Side: Standard right
Forged brass head & valve covers
Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
The Annovi reverberi Pressure Washer Pump XWL41.21N has the following specifications:
Max Flow (in GPM): 10.8
Max Flow (in L/Min): 41.0
Max Pressure (in PSI): 3000
Max Bar: 200
Power EBHP: 22.2
Bore Dia: 28mm
Stroke: 17.2mm
Crankshaft ID Stamp: 2
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, solid
Weight: 34.0 lb.
The Annovi reverberi Pressure Washer Pump XWL41.21N Replaces the following:
Udor Model #: GKC 38/17-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 2500
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid
Udor Model #: GC 38/15-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 2200
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid
Udor Model #: GKC 38/20-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 3000
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid
Udor Model #: GKCW 38/14-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 2000
Pump Speed (in RPM): 1100
Shaft Diameter: 24mm, Solid
Comet Model #: TWN 7025-S
Max Flow (in GPM): 7.0
Max Pressure (in PSI): 2500
Pump Speed (in RPM): 1000
Shaft Diameter: 24mm, Solid
Comet Model #: TW 10025-S
Max Flow (in GPM): 10.0
Max Pressure (in PSI): 2500
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid
Comet Model #: TWS 10025-S
Max Flow (in GPM): 10.7
Max Pressure (in PSI): 2500
Pump Speed (in RPM): 1750
Shaft Diameter: 24mm, Solid
General Pump Model #: 100015 (MD-15)
Max Flow (in GPM): 12.0
Max Pressure (in PSI): 2000
Pump Speed (in RPM): 1750
Shaft Diameter: 24mm, Solid
AR Pressure Washer Pump Availability:: available for order Product Code: XWL41.21N
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE XWL41.21N 12/07/2011
The CD-2565HWBCOM BE pressure washer is a heavy duty gas power washer that features a reliable 6.5 HP Honda GX200 Engine, to go along with a high quality COMET LWS Washer pump. The CD-2565HWBCOM BE pressure washer comes complete with everything you need to start cleaning, including a hose, 36″ lance, gun, and tips. This is a common pressure washer for property and small business owners, construction workers and handymen.
The BE CD-2565HWBCOM Pressure Washer Features:
2500 PSI Max Pressure.
3.0 GPM Max Flow
Laser aligned dual-cogged pulley system help prevent belt slippage on the BE CD-2565HWBCOM Pressure Washer.
Powered by a commercial-grade 6.5HP Honda GX200 gas engine with steel gas tank & engine oil alert
Quick remove stainless steel belt guard removes easily with three hand-tightened knobs. No tools required.
Cool air is draw in over the pump reducing the heat by 25%.
Industrial steel frame, chrome plated handles
COMET LWS Pump
(1) BE CD-2565HWBCOM Pressure Washer
(1) 36 inch Insulated spray Lance
(1) Soap Tip
(1) Garden Hose Inlet
(1) Quick connect coupler
(1) Low pressure chemical injector
(1) 50 ft High Pressure Hose
(1) Spray Gun
The BE CD-2565HWBCOM Pressure Washer
The BE CD-2565HWBCOM Pressure Washer has the following specifications:
6.5 HP Honda GX200 Engine
PSI 2500
GPM 3.0
COMET LWS Pump
List Price: $1,398.00 Our Price: $998.00 You save $400.00! Availability:: available for order Product Code: CD-2565HWBCOM
BE Pressure Washer
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE BE CD-2565HWBCOM PRESSURE WASHER 12/06/2011
Spotlight on LANDA – WATER JET SURFACE CLEANER – Click here to order today 8.903-606.0
LANDA – WATER JET SURFACE CLEANER – 8.903-606.0
The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 is the premier surface cleaner on the market. This LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 attaches easily to a hot- or cold-water pressure washer and “mows” grime on most flat surfaces, from concrete to asphalt. The stainless steel spray bar, with two precision spray nozzles, spins at an astounding 2000 RPM.
The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 is the Mercedes-Benz of the surface cleaning market. It handles easier, cleans faster and holds up better under the toughest conditions. The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 spray bar spins at 2000 RPM and can be adjusted to blast concrete but not dig up asphalt or wood. The rotating bar and shaft are made of stainless steel with sealed precision guide bearings for low maintenance and a long life. A holster-mounted trigger gun and insulated wand make for convenient spot cleaning in hard-to-reach places.
Other features of The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 include:
• Made of durable, rust-free polyethylene, for easy handling,but weighs only 45 lbs.
• Pneumatic tires on steel wheels make for easy maneuvering on all surfaces;
• Easy-to-clean, in-line filter keeps spray nozzles from plugging;
• Auto switching between surface cleaner and holster-mounted wand;
• Tri-lingual warnings and operating instructions;
• Collapsible handle for ease in transporting.
The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 Features:
Water Jet surface cleaner easily attaches to Hot- or Cold-Water Pressure Washer
Up to 5 GPM, 4000 PSI
Spins at 2000 RPM
Fatigue-free Trigger Bar
LANDA – WATER JET SURFACE CLEANER – 8.903-606.0
The LANDA – WATER JET SURFACE CLEANER – 8.903-606.0 has the following specifications:
Fatigue-free, safety Handle and Trigger Bar instantly stops the Water Jet surface cleaner for operator protection.
Easy-turn Swivel Hose Connection keeps the hose from tangling while the Water Jet surface cleaner is attached to the pressure washer for easy handling and maneuvering.
Tri-Lingual Operating Instructions and Warnings in English, Spanish and French for convenience of the operator and owner liability protection.
Easyto-clean, high-pressure Inline Filter minimizes maintenance by preventing spray nozzles from plugging.
Self-lubricating Rotary Union is protected in a stainless steel housing and features industrial strength ball bearings and tungsten carbide seat for long life and low maintenance.
Recommended Operating Pressure: 2000 – 4000 PSI
Recommended Water Volume: 2 – 5 GPM
Maximum Allowable Water Temp: 190°F
Cleaning Width: 22 inches.
Dimensions: 48”L x 22”W x 37”H
Product Code: LAN-8.903-606.0
Click here to order today 8.903-606.0
SHIPS UPS OVER-SIZED. COMES COMPLETELY ASSEMBLED.
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS WATER JET SURFACE CLEANER 12/2/2011
1 Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life on this 60G1 Pump.
2 Manifolds are a high tensile strength forged brass for long term, continuous duty.
3 100% wet seal design adds to service life by allowing pumped liquids to cool and lubricate on both sides.
4 Stainless steel valves, seats and springs provide corrosion-resistance, ultimate seating and extended life on this 60G1 Pump.
5 Specially formulated, CAT PUMP exclusive, V-Packings offer unmatched performance and seal life.
CAT Pressure Washer Plunger Pump 60G1
The CAT Pressure Washer Plunger Pump 60G1 Features:
Triplex design delivers high efficiency and low pulsation on this 60G1 Pump.
Durable dual V-Packings are lubricated and cooled by pumped liquid.
Pre-Set Lo-Pressure Seals provide secondary protection against external leaks and require no packing adjustment.
Special high density, polished, concentric plungers provide a true wear surface and extended seal life for the 60G1 Pump.
Optional HT, FPM elastomers for compatibility with many liquids and temperatures up to 200°F.
CAT Pressure Washer Plunger Pump 60G1
The CAT Pressure Washer Plunger Pump 60G1 has the following specifications:
Bore……………………………………………………………………..0.708” (18 mm)
Inlet Pressure Range………………………Flooded to 60 psi (Flooded to 4 bar)
Crankcase Capacity…………………………………………….25 oz. (0.75 l)
Standard Liquid Temperature…………………………..160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Spotlight on BE P275HA Pressure Washer 5HP Honda 2700psi GC160 Engine
This P275HA BE Pressure washer is considered one of the top of the line homeowner/small contractor units. The BE P275HA Pressure Washer features a 2700PSI washer pump which means that it is ideal for spraying a variety of surfaces, including driveways, siding, decks and more.
The BE P275HA Pressure Washer Features:
2.5 GPM Axial pump
5.0 HP Honda GC 160 Engine
Residential rated for 500 – 600 hours
Powder coated steel frame
25ft High Pressure Hose
10″ Tires
2700 psi
AR RMV25G30 Pump
(1) Pressure Washer
(3) Cleaning tips
(1) Soap Tip
(1) Low pressure chemical injector
(1) 25′ Hose & 36″ Gun
BE P275HA Pressure Washer
The BE P275HA Pressure Washer has the following specifications:
2.5 GPM Max Flow
2700 PSI Max Pressure
Powered by a reliable 5.0HP Honda GC160 gas engine.
Redo – Commercial grade axial pump with oil sight glass and oil drain plug.
List Price: $698.00 Our Price: $513.00 You save $185.00! Availability:: available for order Product Code: P275HA
BE Pressure Washer
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE 11/30/2011
Pressure Range…………………….100 to 3000 PSI (7 to 210 BAR)
Inlet Pressure Range…………………–5 to +60 PSI (–0.35 to +4)
RPM ……………………………………………1000 RPM (1000 RPM)
List Price: $3,950.24 Our Price: $2,949.86 You save $1,000.38! Availability:: available for order Product Code: BAPL-5836 (CAT Pressure Washer Pump 660)
CAT Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS CAT Pressure Washer Pump 660 11/21/2011
This CAT Pump 7CP6110 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a forged brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1750 RPM permits a close coupled installation using a bell housing and flexible coupling. Select 31570, 8370, 8375, 8380 according to desired performance. [7CP6110BH103 Pump, motor, coupling and bell housing shown]
The CAT Pump 7CP6110 Features:
Forged Brass head with optional FPM and EPDM elastomers offer compatibility with a wide range of liquids.
Flexible coupling/bell housing, gearbox and belt drive options provide flexibility with a compact footprint.
Rugged continuous-duty triplex design provides long life and low maintenance.
Matched system accessories to complete your system whether you design or we custom build to your specifications.
Our Price: $3,033.00 Availability:: Available for Order Product Code: 7CP6110
CAT Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS 7CP6110 11/18/2011
List Price: $1,590.00 Our Price: $791.04 You save $798.96! Availability:: available for order Product Code: 6400.1004.00
Comet Pressure Washer Pump PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS FW 3530 SGR PUMP 11/17/2011.
