pumps Archives - Page 11 of 39 - ETS Co. Pressure Washers and More!

October 4, 2017

General Pumps TC1802E175 replacement pump

General Pumps TC1802E175 is a replacement pump for your pressure washer that requires a flow rate of 0.50 gallons per minute and a maximum pressure rating of 1500 PSI.

The TC1802E175 pump is a bit more expensive than other pumps with the same flow rate and PSI, but it is made by general pumps and will last a lot longer with less repairs and downtime for your business.

This General Pumps TC1802E175 replacement pump has the following features:

The pump has a Forged brass manifold
Die cast, anodized aluminum, oil bath crankcase makes for longer life than most pumps.
Solid ceramic plungers with continuously lubricated packings add to pumps life
The pump has original Interpump unitized, stainless steel, K01 kit inlet and outlet valves
This unit is ideal for all general cleanin, RO, and misting applications
The pump comes standard with NEMA 56C electric motor mounting flange

The technical specifications are as follows for this pump:

Maximum Volume is 0.5 GPM
Maximum Discharge Pressure of the pump is 1500 PSI
Maximum Pump Speed rotates at 1750 RPM
Maximum Inlet Pressure on the unit is 125 PSI
Maximum Inlet Vacuum of the pump is 3 ft. water (2.6″Hg)
The Bore diameter measures 18mm (.709″)
Stroke on this item has a measurement of 2mm (.079″)
Crankcase Capacity on this item is 11.2 oz.
Maximum Fluid Temperature that can be run through the pump is 165 F
Inlet Port Thread measures 3/8″ FPT
Discharge Port Thread has a measurement of 1/4″ FPT
Shaft Diameter for mounting the pump is 5/8″ (16mm)

Already own a General Pumps TC1802E175 replacement pump, and want to fix it yourself before buying a new one? Click here to find this units repair / breakdown manual and order parts and kits for a quick DIY fix.

Not sure if the General Pumps TC1802E175 replacement pump is the right pump for you? give us a call toll free and we will be happy to assist you in figuring out the correct unit for your pressure washer. Call 1-877-824-7763 {Smart Phones Click to Call}

Or if you are ready to order the pump and get back up and running do so by clicking here to order fast and secure.

This pump qualifies for our 5% off everyday sale! Just add the pump to your cart and in the coupon field use code “5off” to get 5% off the purchase price of the pump.

October 3, 2017

RMW2.5G28-EZ-SX pump from Annovi Reverberi

RMW2.5G28-EZ-SX pump from Annovi Reverberi is a vertical style pump that mounts the back of your pressure washer. This pump is rated 2.5 gallons per minute and has a maximum PSI of 2800. This unit can also be written as RMW25G28-EZ-SX.

The RMW2.5G28-EZ-SX pump from Annovi Reverberi spins at 3400 RPM and is one of the more commonly used pumps on your home improvement or big box store bought pressure washer. Don’t by a whole new unit from Home Depot or Lowes, repair the one you bought with this great little pump.

Please be aware that this RMW2.5G28-EZ-SX pump from Annovi Reverberi is rotated 180 degrees, for mounting under your pressure washer. Please see your units repair manual to determine if this is the correct mounting for your machine.

The RMW2.5G28-EZ-SX pump from Annovi Reverberi has the the following specifications:\

The unit is a Vertical Mount with Gas Flange 3-7 HP
Max. Volume on this pump is 2.5 GPM
Max. Discharge Pressure of this unit is 2,800 PSI
Max. Pump Speed on the RMW SX is 3,400 RPM
Shaft Diameter for mounting measures 7/8” Hollow
Built In unloader and chemical injector come standard on this pump
Built In easy start valve is also standard on this unit.
Maximum Horsepower Requirements to work this pump is 6.5 GHP
Inlet Port on the unit measures 3/4″ FGH (garden hose)
Outlet Port has a measurement of 22mm (Twist Connect)
Brass manifold for long life.
Stainless steel plungers built to make this pump last.
Pump comes filled with oil for quick step up and use.
Note: Engine shafts longer that 2” will require spacers or washers found at your local hardware store.
Weight of the SX pump is 7.7lb.

The RMW2.5G28-EZ-SX pump from Annovi Reverberi is not recommended to be repaired, as they are easier to replace both in time and money, however if you want to try your hand at DIYing it you can find the pump repair manual and breakdown by clicking here. Having trouble trying to figure out if this is the right unit for your big box store bought pressure washer from Home Depot of Lowes? Give us a call and we will help you determine the correct replacement pump for your machine. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order? Place your order on our eCommerce store by clicking here.

As a bonus this pump does qualify for our everyday 5% off sale. Just use the coupon code “5off” at check out to get 5% off your total order over $50.00

September 27, 2017

GIANT PUMPS – HR3025-111H – Triplex Ceramic Plunger Pump

The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps, that is made to be the replacement on your pressure washer that requires a 3 gallon per minute flow rate at a maximum pressure of 2500 PSI.

This HR3025-111H pump can pump water up to 80 degrees making it perfect for almost any cleaning situation you and your pressure washer get into. Great for cutting grease and dirt from any surface.

The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps has the following specifications:

Volume on the HR3025-111H is 3.0 GPM
Maximum Discharge Pressure of the HR3025-111H is rated at 2500 PSI
Maximum Discharge Pressure (HR3030) is 3000 PSI
Maximum Inlet Pressure is Up to 90 PSIG1
The RPM of the unit is 3450
Plunger Diameter measures at 16mm
Stroke of the pump is measured at 5.9mm (8.0 o angle)
The Crankcase Oil Capacity is 4.5 fl. oz.
Operating Temperature of Pumped Fluids Up to 80 F
Inlet Port on this pump measure 1 x 1/2″ NPT
The Discharge Ports measure 3/8″ NPT
Shaft Rotation is Clockwise
Weight of this unit is only 11.4 lbs.
Width of the overall pump is 6-7/16″
Height on this pump is 10-1/4″
Swash Plate Bore of the HR3025-111H measures 3/4″x3/16″ Keyway
Swash Plate Bore of the (HR3030) measures 1″x3/16″ Keyway
Valves are made of Polyamide Plastic

Want to fix and already owned pump like this from Giant Pumps? Go to our repair and breakdown manual page and find this unit or any Current Giant Pump on the market today, to see it’s repair parts and kits by clicking here.

Not sure if the HR3025-111H is the right pump for your machine? Give us a call and a Giant Pump Specialist will be glad to assist you with any questions. We are here M – F 7:30 am till 4:00 PM EST. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order your replacement HR3025-111H pump today? Click here and order it securely on our eCommerce site.

This unit does qualify for our everyday sale of 5% off $50.00 or more. At checkout just add the coupon code “5off” into the coupon field to get and extra 5% off this unit, and anything else you order with it!

September 26, 2017

Annovi Reverberi Replacement Pump RQV2.5G24D-EZ

The Annovi Reverberi Replacement Pump RQV2.5G24D-EZ which can also be identified as RQV25G24D-EZ is a horizontal type unit for a pressure washer that requires a flow rate of 2.5 gallons per minute with a maximum PSI rating of 2400.

This RQV2.5G24D-EZ pump spins at 3400 RPM connecting to a 3/4″ shaft and works on a gasoline powered engine. The pump has a built in chemical injection system as well as a pressure control valve. The unit comes with an EZ start and thermal relief valve standard.

The RQV2.5G24D-EZ pump has the following Specifications:

A Max. Volume flow rate of 2.5 GPM
The Max. Discharge Pressure of 2,400 PSI
a Max. Pump Speed that spins 3,400 RPM
The Shaft Diameter that measures 3/4” Hollow
This pump has a Maximum Horsepower Requirement of 5.9 GHP
The Inlet Ports are 3/4″ GHA (garden hose)
With Outlet Ports that measure 22mm-14 (Twist Connect)
The pump weighs in at 6.5 lb.

The features of the RQV2.5G24D-EZ are as follows:

3-Piston alternating volumetric pumps for use on cleaning units
Can be directly coupled to gas engine flange
Fits most homeowner type horizontal pressure washers
Horizontal Mount with Gas Flange 3-6 HP (2-9/16 center to center)
Pump body in die-cast aluminum alloy
Pistons driven by swash plate mechanism
Two bearing systems, to support the pump shaft and pistons
Pistons in hardened and tempered steel
Pump head in aluminum
Intake valves fitted above the pistons for greater efficiency
Integral regulating valve
Integral detergent suction system

Already own a RQV2.5G24D-EZ pump and want to fix it. Click here to find the parts breakdown / repair manual.

Not , sure if this is the correct pump for your pressure washer? Give us a call toll free and an Annovi Reverberi Pump specialist will be glad to help you out. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to get back up and running? Order the pump here on our eCommerce site.

This pump does qualify for our everyday special of 5% off $50.00 or more. Simply put the code “5off” in the coupon field at check out and you will get the discount.

September 14, 2017

RMV2.5G30D pump from Annovi Reverberi

RMV2.5G30D replacement pressure washer pump from Annovi Reverberi. This pump is for repair of pressure washers that have a flow rate of 2.5 gallons per minute and a maximum rating of 3000 PSI. The unit spins at a industry standard of 3400 RPM.

The RMV2.5G30D can connect to a direct drive system of a gas powered pressure washer that has a mounting shaft size of 3/4″. The pump is equipped with a built in chemical injector and has an installed pressure control valve all standard, making it the perfect replacement pump for most home pressure washers on the marked today.

RMV2.5G30D replacement pressure washer pump

The Rmv2.5G30D has the following specifications:

The pump features a 3/4″ hollow shaft and operates at 3400 RPM, with a max PSI of 3000.
This unit has a Max Flow (in GPM) of 2.5
The Max Flow (in L/Min) is 9.5
The pump has a Max Bar of 200
Power of this unit in EBHP is rated at 4.3
This pump has a Bore Diameter of 12mm
Stroke on this unit is 9.7mm
Crankshaft has an ID Stamp of 1

Check your pressure washer, you might already have an RMV2.5G30D installed on it. If this is the case and it has stopped working you may be able to repair this pump yourself. You can find the pumps breakdown / repair manual by clicking here. Or if you are not sure if this is the pump you have installed but want to try to fix it before you replace it you can find all the Annovi Reverberi Pump Breakdowns / Repair Manuals here.

Still not sure if you own or even can use a RMV2.5G30D pump? Just give us a call and we will be more than happy to assist you in figuring out what you have and what will work best for your pressure washer. Call us toll free at Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order? Do so by clicking here to order securely on our eCommerce site. Don’t for get to use coupon code 5off at checkout on all orders over $50.00 to get an additional 5% off!!

September 8, 2017

Hypro Pumps – 5315C-X the 5300 SERIES PUMP Assembly

This post is for the 5315C-X which is made from Hypro Pumps and is in there 5300 series of pressure pumps for sprayers. This assembly is designed for long life and will get your sprayer up and running fast.

The 5315C-X pump is rated for sprayers that need a flow rate of 1.5 gallons per minute and a maximum pressure of 500 PSI. It is also recommended for units that spin at no more that 1800 RPM.

Hypro Pumps 5315C-X has the following technical specifications:

The pump has a 1.5 MAX GPM
500 is the MAX PSI for this 5315C-X
This unit spins at an 1800 MAX RPM
The pump is made from cast iron for durability.
The unit has a 5/8″ OD SOLID SHAFT for mounting
This unit has 1/2″ NPT PORTS for inlet and outlet.
140 DEGREES F is the maximum operation temperature for this pump.
The pump has a leather cup.

If you already own a 5315C-X pump and need to fix it, you can find the breakdown / repair parts manual by clicking here. Or if you are not sure if this is the correct sprayer for your unit you can find all hypro pumps breakdowns here or as always give us a call toll free by dialing or clicking the phone: Call 1-877-824-7763

These pumps are perfect for non abrasive or general chemical spraying situations, the body is made of cast iron with the inside valves and parts being made of stainless steal. It also has leather reinforced seals making this perfect to get you back up an spraying for a long time.

Ready to order this unit for your sprayer or pressure pump? Please either call us at the number above or you can order it securely on our eCommerce site by clicking the link here: 5315C-X

September 1, 2017

Comet Pumps – 6305.1800.00 PUMP also called the ZWD 4035 G

This is information for the Comet Pump 6305.1800.00 PUMP also called the ZWD 4035 G. This pump is for pressure washers that have a flow rate of 4.0 GPM and a maximum pressure of 3500 PSI. This unit is for machines that spin at 3400 RPM.

The 6305.1800.00 PUMP also called the ZWD 4035 G is a replacement pressure washer pump that mounts to a gas engine and has a reversible crankshaft that allows it to be connected to either a right or left hand mounting system.

6305.1800.00 PUMP also called the ZWD 4035 G has the following specifications:

The zwd 4035 G has a Maximum Volume of 4.0 gpm
This pump has a Max. Discharge Pressure of 3500 psi
6305.1800.00 also has a Maximum Pump Speed 3400 rpm
The Inlet Port Thread of this pump is 1/2 FPT
This unit has a Discharge Port Thread of 3/8 FPT
The zwd 4035 G has a Shaft Diameter of 1″ and is Hollow
Pistons on the 6305.1800.00 are 15mm
Weight of this unit is 16.5 lbs.

Some other features of the 6305.1800.00 PUMP also called the ZWD 4035 G are that the unit has:

1/2 FPT Inlet — 3/8 FPT Discharge
Anodized, Die-Cast Aluminum Crankcase
Solid Ceramic Plungers
Stainless Steel Check Valves
Buna-Textile V-Packings

If your pressure washers pump has stopped working and you need a new one with the above specifications this 6305.1800.00 PUMP also called the ZWD 4035 G is a very good and reliable pump to purchase. If you are not sure if this unit is correct or will work on your machine, give us a call and we will be happy to help you figure out the best item to get you back up and pressure washing fast. Call 1-877-824-7763

Do you already own a 6305.1800.00 PUMP also called the ZWD 4035 G? And need to repair it? Just click here to get the breakdown / repair manual for your unit.

Want to order this unit just click here and you can order it securely on our e-commerce site.

August 28, 2017

Annovi Reverberi RMW22G24-PKG replacement pump package.

This blog is for the RMW22G24-PKG, from Annovi Reverberi. It’s a pump package built to be your replacement unit for your pressure washer that needs to have a flow rate of 2 gallons per minute with a maximum PSI of 2400. This pump runs at 3400 RPM, which is the industry standard.

The RMW22G24-PKG was put together by Annovi Reveberi, so home owners and contractors alike could fix their pressure washers quickly and easily with out having to order a bunch of separate parts. This pump package has everything you need in it to replace your units pump and get back up and running fast.

RMW22G24-PKG pump package from Annovi Reverberi

RMW22G24-PKG has the following specifications:

Max GPM 2
Max PSI 2400
RPM 3400
Shaft Size 7/8″
Pump RMW22G24-EZ
Flange Vertical Gas Engine Flange
Thermal Relief Valve TPP140-1/4A
Detergent Tube w/Filter AR1269120
Applications EZ Start Valve

If you are not sure if the RMW22G24-PKG is the correct kit for your pressure washer, you can give us a call Monday – Friday EST 7:30 am until 4:00 pm and one of our Annovi Reverberi pump specialists will be glad to assist you with any questions you may have. Call 1-877-824-7763

On the contrary, if you already own a RMW22G24-PKG and need to repair it we have you covered there too. You can find your units parts breakdown / repair manual here and get all the repair parts you may need to save you time and money of replacing the entire pump. Not sure if you have and RMW pump? Click here to see all out breakdowns for AR pumps and find the one you need.

This kit comes with the following Annovi Reveberi items:

RMW22G24D (also know as RMW2.2G24D) – Pump
TPP140-1/4A – Thermal Relief Valve
AR1269120 – Detergent Tube with Filter

Ready to order? Just give this link a click and you can order the pump securely on our e-commerce site. RMW22G24-PKG

Save

August 25, 2017

LANDA Pump 8.921-713.0 rated 6 GPM at 3600 PSI

The LANDA Pump with a part number of 8.921-713.0 is a replacement unit for LANDA Pressure washers that use a pump with a flow rate of 6 gallons per minute and a maximum output pressure of 3600 PSI. The unit spins at the industry standard of 1450 RPM.

This 8.921-713.0 pump is an original OEM unit made specifically for their pressure washers, and is the first choice when your machine stops building pressure to pump.

Some technical specifications on this 8.921-713.0 pump are:

The unit has a flow rate of 6 GPM.
This pump has a maximum PSI of 3600.
The rpm of this unit is 1450.

A few more details about the 8.921-713.0 are:

Landa’s unique design that delivers the same performance as other pumps but at 10% lower RPM.
10% lower RPM than comparable pumps
Durable ceramic plunger with mirror finish
Unique snug-fit design for heavy-duty valves
Stronger crankcase with cooling fins and thicker mounting feet
Extra-large European made tapered roller bearings for longer life
Larger oil level sight glass
Specially die cast connecting rods for quieter operation and longer pump life
U-seals which allow for up to 185°F inlet water for hot water cleaning, significantly reduce pump maintenance and extend pump life
Tighter piston rod tolerance for reducing wear and maximizing performance
Multi-viscosity pump oil for better lubrication and cooler operation
New and improved check valves for quieter operation and longer valve life

As always, if you’re not sure if this is the correct unit for your machine, you can give us a call and we will be happy to assist you in figuring out if this is the correct item to get you up and running fast. Call 1-877-824-7763

You can also check your pressure washers manual here to determine if the pump is the one needed for your pressure washer by finding the breakdown / repair manual of your unit here.

If you are sure this is the correct pump you can order it fast and easily by clicking here: 8.921-713.0

August 24, 2017

XTV2G15EBA-F8 pump from Annovi Reverberi for your pressure washer.

The XTV2G15EBA-F8 is a replacement pump from Annovi Reverberi for your pressure washer that requires as flow rate of 2.11 gallons per minute with a maximum pressure of 1500 PSI. This unit has an RPM of 3400 and is made to mount on pressure washers with a 5/8″ standard type shaft.

Our XTV2G15EBA-F8 pump has a head forged from solid brass and has a body made from die-cast metals, making it a durable and dependable replacement for your current pressure washer.

Some technical specification of the XTV2G15EBA-F8 Pump are:

Max GPM – 2.11
Max LMP – 8
Max PSI – 1500
Max Bar – 103
Power EBHP – 2
Bore Dia. mm – 15
Stroke mm – 4.8
Weight Lbs – 10
Max Temp – 140°
Oil Capacity – 8oz
Inlet Thread – 1/2”F
Discharge Thread – 3/8”F

After reading all of the above, if you are not sure if this is the correct pump for your machine you can give us a call toll free and our Annovi Reverberi Pump specialists will be happy to assist you in determining if the XTV2G15EBA-F8 is right for you. Call 1-877-824-7763

Already own a XTV2G15EBA-F8 for your pressure washer and it has stopped working? Try fixing it yourself first with repair kits and parts. To find all the parts and kits available for fixing this pump you can click here. Not sure if this is your actual pump, then click here to find out which pump you have and view it’s breakdown / repair manual.

If you are sure this unit will get you up and running then you can order it securely on our site by clicking here.