pumps Archives - Page 15 of 39 - ETS Co. Pressure Washers and More!

January 23, 2015January 23, 2015

T991 Pump from General Pump

T991 Pump from General Pump.

Order the T991 Pump from General Pump.

The T991 is a powerful replacement Triplex style of pump from General Pumps. The T991 is rated 4 gallons per minute with a maximum pressure rating of 1100 PSI. For those of you that know General Pumps by their series this would be labeled a T Series 50 Pump. This unit is so well built it is covered by a lifetime warranty from General Pump. They put faith in the unit holding up, even under the harsh use most cleaners will put their pressure washers through. General can do this because the forge the head of this unit completely out of brass, and use a specially formulated and die-cast anodized aluminum for the body. Then, they couple this with solid ceramic plungers and packings or water seals that are totally self lubricating. All of this, and more give you the peace of mind that your purchase of this pump will give you 1000’s of hours of work before you need to repair or even replace this part on your unit again.

Here are some basic specification of the T991 Pump:

The pump dimensions and weight are 9.3″ x 8.3″ x 5.4″ and 18.7 lb.
Crankcase has an non-detergent SAE 30W oil capacity of 15.2 oz.
Maximum speed of the item is 1750 RPM.
Horsepower minimum requirements are 3.6 BHP, that is 1.5 times greater for gas powered units.
A 165 degrees F. maximum liquid pump temperature.
This T991 Pump has a stroke and bore of .394″ (10mm) and .787″ (20mm).
The inlet ports is 1/2″ FPT and the one outlet port measures 3/8″ FPT.

This pump T991 is so well made its oil consumption is second to none. In fact, General Pump recommends the following when it comes to your oil: “Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 break-in period, then every 3 months or 500 hour intervals thereafter”.

Should you need to repair this T991 pump you can find the parts breakdown by clicking here.

Do you have more questions about this unit? If so, give us a call toll free:
1-877-824-7763 {Smart Phones Click to Call}

Or if your ready to purchase this powerful little pump, do so by clicking the link below to order online.

Order the T991 Pump from General Pump.

January 22, 2015

XMA2.5G18E-F33 Pump from Annovi Reverberi

Order the XMA2.5G18E-F33 pump from Annovi Reverberi.

The XMA2.5G18E-F33 is a 1750 RPM replacement pump from AR Pumps. The XMA2.5G18E-F33 has a 2.5 Gallon per minute flow rate and a maximum PSI of 1800. This is one of those Annovi Reverberi pumps that has been known to go by many other names on the market. It’s been known to be called the XMA2.5G, XMA2.5G18, XMA2.5G18E, XMA, XMA25, XMA25G, XMA25G18, XMA25G18E and the XMA25G18E-F33. Regardless of how it is identified, this is constructed like all the XM series of pumps with solid ceramic plungers, over sized bearings and forged brass heads to ensure longevity in the harsh conditions most pressure washers come up against.

A few more specifications you may need before you purchase the XMA2.5G18E-F33 pump:

The unit has a 140° maximum liquid temperature that it can pump.
This pump has a weight of 15 pounds and an oil capacity of 14 oz.
If you run metric the LPM is 9.5 and the BAR would be 120.
EBHP power rating of 3 is standard on this XMA2.5G18E-F33 pump.
The inlet and discharge threads are the standard measuring in at 1/2″ female and 3/8″ female respectively.
Stroke and bore are also industry standard, measuring in at 10.6mm and 15mm each.

If you already own an XMA2.5G18E-F33 pump and need parts to get it up and running for your business and workers, we sell all those parts and kits as well. Click here to download and print off the official parts breakdown for this pump.

AR Pumps XMA2.5G18E-F33 Replacement Unit

We are here to help you decide if you should replace or repair your pumps on your pressure washers. Give one of our knowledgeable staff a call and we will guide you through the process of determining the best options for you and your business. Call 1-877-824-7763 {Smart Phones Click to Call}

Or you can order the replacement pump online by clicking below.

Order the XMA2.5G18E-F33 pump from Annovi Reverberi.

January 16, 2015

SJV3G27D-EZ pump replacement from Annovi Reverberi

SJV3G27D-EZ pump replacement from Annovi Reverberi.

Order the SJV3G27D-EZ from AR Pumps Online.

The SJV3G27D-EZ is a standard replacement pump for your pressure washer. This SJV3G27D-EZ pump has a flow rate of 3 gallons per minute or 11.4 liters per minute with a maximum PSI of 2700, that would be 186 BAR. If your pressure washer can handle those specifications and can handle a pump that spins at 3400 RPM then this is the perfectly priced and one of the most well built replacement pumps you can buy today. This pump comes with a lot of built in features making it almost a true bolt and go style of pressure washer pump. The unloader comes already installed and the chemical injector also comes standard, and can be either fixed or of the adjustable type. The SJV3G27D-EZ is designed to install easily on any gasoline powered pressure washer engine that utilizes a 3/4″ hollow shaft, and has a horse power rating of between 3.5 and 6.5.

SJV3G27D-EZ pump replacement from Annovi Reverberi

A few other features you may need to know about the SJV3G27D-EZ pump:

The crankcase oil capacity on the unit is 4.5 oz.
Inlet and discharge threads on this pump are 1/2″ and 3/8″ male type connections.
The weight in pounds on this SJV3G27D-EZ pump is 11.
This pump has an EBPH power rating of 5.2.
The stroke and bore of the item is 6.8mm and 15mm respectively.
A 140° maximum water or chemical temperature can be pumped through the unit.

Should you already own a SJV3G27D-EZ pump from Annovi Reverberi, and just need to repair it, we have everything you need to do that as well. First you will need to know what parts you want to replace on the unit. Go to the pumps, parts breakdown page here and see which parts you will need. Then either call us at 1-877-824-7763 {Smart Phones Click to Call} or go online and order all the parts and kits you need.

If you wish to order this powerful pump you can do so online by clicking below.

Order the SJV3G27D-EZ from AR Pumps Online.

January 8, 2015

5CP5120 CAT Pump – 5CP Plunger Pump

5CP5120 CAT Pump – 5CP Plunger Pump.

Order the 5CP5120 from CAT Pumps Online.

This plunger style pressure washer pump, the 5CP5120 from CAT Pumps is one of the more commonly used units on pressure washers today that require a strong flow and pressure rating. Its 5 gallon per minute or 19 liters per minute flow rate make it one of the fastest pumps used in today’s cleaning industry. The 5CP5120 has a pressure rating from 100 to a maximum of 3000 PSI or 7 to 120 BAR. This pump has one of the fastest RPM in the industry with a top speed of 1415. With all this power, it’s amazing that the pump itself only weights in at a slim 19.9 pounds or 9 kilograms. It just goes to show you that powerful doesn’t always have to mean huge and heavy. This pump will stand up to years of use and abuse even in the worst of situations. It’s why CAT Pumps are sought after by pressure washer manufacturers.

5CP5120 CAT Pump - 5CP Plunger Pump — 5CP5120 CAT Pump – 5CP Plunger Pump

Here are some other features of the 5CP5120 CAT Pump:

The dimensions of the pump are 10.35 x 10.0 x 5.78” (263 x 254 x 147mm).
If you add a gear box the dimensions become 10.5 x 12.4 x 6.4” (267 x 315 x 162mm).
The 5CP5120 has an inlet pressure range of -2.5 to 60 psi or -.2 to 4 bar.
A 17 oz. or 0.51 L. crankcase oil capacity is one of the largest on this style of pump.
The two inlet and two discharge ports measure 1/2” NPTF and 3/8” NPTF respectively.

This pump is great for higher temperatures, it has a maximum temperature range of 160°F or 71°C. As with most CAT Pumps it’s best to check with CAT should your temperatures routinely go over 130°F. It connects to your pressure washer via a 0.787” or 20 mm shaft diameter. The stroke and bore on this 5CP512 measure 0.709” (18 mm).

Need parts to fix your 5CP5120 Pump? Click here for the part breakdown. If you lost your service manual we have you covered for that as well. Click here for this pumps service manual.

Do you have more questions about the 5CP5120 CAT Pump? Give us a call today:
1-877-824-7763 {Smart Phones Click to Call}

If your ready to order the pump click the link below to order directly from our online store.

Order the 5CP5120 from CAT Pumps Online.

December 24, 2014December 24, 2014

General Pumps EZ4040G Replacement Pressure Washer Pump

Today’s blog will be about the General Pumps EZ4040G Pressure Washer Replacement Pump.

Order the EZ4040G Online.

If your pressure washer uses a gas flanged General Pump odds are it’s the EZ4040G unit. This unit is used on a lot of industrial pressure washers because of its strength and durability for everyday cleaning use. The EZ4040G has a powerful rating of 4000 PSI at a industry standard 4 gallons per minute. With an added 3400 RPM maximum pump speed you will be enjoying this units life for years and years.

General Pumps EZ4040G Pressure Washer Pump

Here is some technical data you should be aware of for the EZ4040G:

The stroke and bore of this pump both measure 13mm.
14 oz. oil capacity on the crankcase is one of the larger ones on the market today.
This EZ4040G has a 165 F degree maximum on the fluid it’s pumping.
Comes with a 1/2″ FPT inlet port and a 3/8″ FPT outlet connection standard.
It has a 1″ hollow shaft and weighs in at just around 20 pounds.
Finally to know if it will fit the space you need it has measurements of 8.8″x9.7″x6.5″.

If you need more information on the EZ4040G pump click here for the General Pump Breakdown.

The EZ4040G has a very special one piece plunger designed to prevent captivation and thermal shock with an innovative bonding process of the pumps plungers. This replacement pump is made to fit on pressure washers with gasoline engine speeds up to 16 HP via a standard SAE J609 mounting flange. With a brass forged manifold and all anodized and die cast aluminum crankcase the unit is going to last you a long time before you have to replace it again. Another long life feature of the EZ4040G pump is the use of stainless steel for all of the outlet and inlet ports, making the everyday wear and tear of connecting and disconnecting the pump less destructive to these ports.

Is this the pump for you? Give us a call to order the EZ4040G pump from General Pumps: Call 1-877-824-7763 {Smart Phones Click to Call}

If you prefer feel free to order the EZ4040G replacement pump from General Pumps Online as well.

December 22, 2014

The TS2021 General Pumps Pressure Washer Pump.

The following is a detailed blog about the TS2021 Pressure Washer Pump From General Pumps.

Order the TS2021 Pressure Washer Pump from General Pumps Online here.

The TS2021 is a replacement triplex series 47 pressure washer pump from General Pumps. Like all of the series 47 pumps from General it comes with the standard power an precision one expects from a pump of this size. The TS2021 has a maximum PSI of 3500 with a flow rate of 5.6 gallons per minute. This combined with a 1450 rounds per minute make this pressure washer replacement pump the ideal choice for your machine.

TS2021 General Pumps Pressure Washer Pump

Here are some important features you may need to know about the TS2021 Pump:

The TS2021 has one of the largest crankcase oil capacity of 40.6 ounces.
The 1/2″ FPT Inlet port and the 3/8″ FPT Outlet port are industry standards for this size replacement pump.
A 165 degrees F. maximum liquid temperature make it ideal for pressure washers used in the cleaning circles.
With a weight of 32 pounds and dimensions of 12.2″ x 9.2″ x 6.9″ make this replacement pump a superior fit for most pressure washers on the market today.
Oil changing is only required about once every 500 hours or 3 months of in use service which ever comes first. This is after the very first oil change which should be done after the initial 40 hours of run time.

Do you need just parts for your TS2021 Pump? Click Here for a parts breakdown.

This TS2021 pump from General pump comes with a lifetime warranty on the head of the pump which is made from forged brass. The crankcase is tough and rugged being made of a die cast anodized aluminum, with one of the largest capacities of pumps of this power and size. The tapered roller bearings are made from the most heavy duty materials and the ceramic plunger rods are always being lubricated with the packings to give you the most from your purchase of this replacement pump.

If you need the “L” version of this pump one is available from General Pumps as well. Click here for the “L” version of the TS2021 pump.

Do you have any more questions we didn’t cover here? Give us a call and we will be happy to assist you in your search for a replacement pump for your pressure washer: Call 1-877-824-7763 {Smart Phones Click to Call}

If your ready to order the TS2021 Pump click below.

Order the TS2021 Pressure Washer Pump from General Pumps Online here.

December 18, 2014December 18, 2014

General Pump TS1511 T Series Pressure Washer Pump

Here is a little more information on the General Pump TS1511 T Series Pressure Washer Pump

Click here to order the General Pump TS1511

This 47 series T pump from General Pumps is one of the best pumps on the market made specifically for the cleaning industry. The TS1511 pump has a powerful 4 gallon per minute rating with a PSI of up to 3500 making it the perfect pump for all your cleaning needs.

The General Pump TS1511 T Series Pressure Washer Pump comes with an industry exclusive lifetime warranty on the manifold which is made of strong forged brass. The pump has one of the largest crankcases with a 40.6 oz capacity and is made of anodized die cast aluminum. This pump from General pumps also has completely solid ceramic plungers that are constantly being lubricated by the TS1511 pumps packings.

Other Features on the TS1511 Pump from General Pumps:

This pump has 1/2″ FTP inlet ports and outlet ports that measure 3/8″ FTP.
The 6.8 bhp or 10.3 hp (gas) is the bare minimum horsepower you need to power this pump.
The TS1511 is also able to be purchased in a “L” type verison. More information here.
The pump has a .787″ or 20mm bore dimension and a stroke dimension of .472″ or 12mm.
It’s shaft diameter is a profound .945″ or 24mm.
The dimensions and weight of this pump are 12.2″ x 9.2″ 6.9″ and 32.0 lbs. respectively.

Oil consumption and break in period for a new TS1511 Pump from General Pumps:

You will need to fill the oil crankcase after unpacking and installing this pump to the oil gauge indicator DOT found on the oil gauge window with a non-detergent SAE 30 weight oil. Then after about 40 hours of you using the pump you will need to drain the oil from the pump and refill with new oil of the same specifications above. After this initial 1st time period you shouldn’t have to redo the oil until either 500 hours of use or 3 months have passed.

Need more technical data or parts breakdown on the General Pump TS1511 pump?

Click here for Parts Breakdown

If you need any more information or help with this pump from General Pumps please give us a call at:
Call 1-877-824-7763 {Smart Phones Click to Call}

Or if your ready to order the TS1511 pump you can call the number above or,

Click here to order the General Pump TS1511

December 8, 2014

Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8

Spotlight on the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8

Features of the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8:

Direct Drive with electric flange
5/8″ Shaft Diameter
Die-cast body and brass head
Plungers – solid ceramic titanium impregnated for extended pump life
Crankcase – oversized die cast aluminum with special cooling fins
Bearings – premium tapered roller bearings
Valves, seats and springs – stainless steel with ultraform cages
Plunger rods – high strength stainless steel.
Connecting rods – oversized one piece special alloy to assure proper plunger alignment

Specifications of the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8:

Max GPM………………3
Max LMP…………………………11.4
Max PSI………………….2200
Max Bar………………………….152
Power EBHP……………4.5
Bore Dia. mm…………………….18
Stroke mm……………….9.6
Weight Lbs………………………..11
Max Temp……………….140°
Oil Capacity………………………10oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F

XTA3G22E-F8 AR (Annovi Reverberi) Pump 3 GPM @ 2200 PSI @ 1750 RPM, XTA1750rpm.

XTA3G22E-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. The XTA3G22E-F8 has One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, over sized for strength and load disbursement.

Click here for the Parts Breakdown of the XTA3G22E-F8 Pressure Washer Pump

Items NOT INCLUDED with your XTA3G22E-F8 Plunger Pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your XTA3G22E-F8 Plunger Pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your XTA3G22E-F8 Plunger Pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your XTA3G22E-F8 Plunger Pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

List Price: $696.75

Our Price: $355.24 Click here to order this pump

You save $341.51!

SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: XTA3G22E-F8
Price subject to change on the XTA3G22E-F8 Pressure Washer Pump from Annovi Reverberi

November 5, 2014

Spotlight on Hypro Pumps 5324C “Small Twin” piston pump

A Spotlight blog on Hypro Pumps 5324C “Small Twin” piston pump.

Features of the Hypro Pumps 5324C “Small Twin” piston pump:

Port sizes: 1⁄2″ inlet, 1⁄2″ outlet
Max. fluid temperature: 140°F/60°C
Weight: 10 lbs./4.5 kg
Pump shaft rotation: bi-rotational
Cups: Leather (-X) standard for 5300 Series [Buna-N (-RX), Teflon (-CX) available]
Models require a pulsation dampener (such as a 3375-0012 pulse hose) on the discharge side
Injector head available 3396-0014

Technical Specifications of the Hypro Pumps 5324C “Small Twin” piston pump:

MAXIMUM RATED FLOW: 3 GPM
MAXIMUM PRESSURE: 500 PSI
MAXIMUM RATED SPEED: 1800 RPM
MAXIMUM FLUID TEMPERATURE: 140°F/60°C

5324C SERIES PARTS LIST Click here.

The 5324C “Small Twin” piston pumps from Pentair Hypro are used in a variety of spraying, pressure cleaning and hydrostatic testing applications. The 5324C heavy-duty pumps are ideal for fluid handling of water and non-abrasive or general use chemicals. All pumps are constructed from cast iron materials.

List Price: $538.00

Our Price: $358.61 Click here to order this pump

You save $179.39!

SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: 5324C
Price subject to change on the 5324C piston pump from Hypro Pumps.

October 15, 2014

Pump Made Ready XMV3G30D-F24 with VRT3-250 with Bypass & Thermal Relief Valve

Technical Specifications of this Pump Made Ready XMV3G30D-F24 with VRT3-250 with Bypass & Thermal Relief Valve:

Triplex Plunger Pump
Direct Drive with Gas Flange
Maximum Volume: 3.0 GPM
Maximum Discharge Pressure: 3000 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Shaft Diameter: 1″ ID with gas flange
Weight: 19 lb.

Features of the Pump Made Ready XMV3G30D-F24 with VRT3-250 with Bypass & Thermal Relief Valve:

Manifold: High strength forged brass for long term use
Bolts: eight 6mm grade 12.9
Plungers: A special thick solid ceramic for long life, strong durability and more resilience
Crankcase: Precision die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Ove rsized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.
Valves, Seats, and Springs: Stainless steel with specially designed ultra form cages provide extra long life and positive seating.
Seals and Packings: Continuously lubricating for extended life
Plunger Rods: High strength stainless steel
Connecting Rods: One piece special alloy aluminum based over sized for maximum strength, load disbursement, and long life

The XMV3G30D-F24-VRT3-250 W/BYPASS & THERM RELIEF Valve Pump made ready is designed for easy replacement of most pumps. Remove your old pump and fittings and slide this pump made ready on.

SEE BAPL-6600 TO ADD TESTING TO CART.

Lubrication for thePump Made Ready XMV3G30D-F24 with VRT3-250 with Bypass & Thermal Relief Valve:

Use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.

Parts Breakdown for the XMV3G30D-F24 Click here.

List Price: $546.46

Our Price: $420.50 Click here to order this pump

You save $125.96!

SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: BAPL-5321
Price subject to change on the XMV3G30D-F24 Pump Made Ready with VRT3-250 Unloader and Bypass & Thermal Relief Valves.