You save $266.06! Availability:: available for order Product Code:6501.0059.00
Price subject to change on the 6501.0059.00 AXD 2527 G-T Pressure Washer Pump
Spotlight on the Annovi Reverberi / AR North America XMV3G27D-F25 pump.
Annovi Reverberi / AR North America XMV3G27D-F25 pump.
This XMV3G27D-F25 Version with F25 flange series pumps are designed to direct drive on gasoline
engines ranging from 5 – 7 HP. The XMV3G27D-F25 pump Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components on the XMV3G27D-F25 pump include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. The XMV3G27D-F25 pump has over sized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drives this XMV3G27D-F25 pump. One-piece connecting rods are special alloy aluminum, over sized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems.
Technical Specifications of this XMV3G27D-F25:
Triplex Plunger Pump
Direct Drive with Gas Flange 3-6.5 HP SAE
Max. Volume: 3.0 GPM
Max. Discharge Pressure: 2,700 PSI
Max. Pump Speed: 3400 RPM
Shaft Diameter: 3/4” Hollow
Max. Horsepower Requirements: 7.3 GHP
Max. Fluid Temp.: 160 degrees F.
Inlet Ports (2): 1/2″ BSP
Discharge Ports (2): 3/8″ BSP
Drive Side: Standard right
Forged brass head & valve covers
Solid ceramic plungers
Weight: 19.0 lb.
The XMV3G27D-F25 pump Features:
Manifold: High strength forged brass for long term use
Bolts: Eight 6mm grade 12.9
Plungers: Special thick solid ceramic for long life, strong durability and more resilience
Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings.
Valves, Seats and Springs: Stainless steel with specially designed Ultra form material valve cages that impervious to water absorption and provide long life and positive seating
Seal and V-packings: Continuously lubricating for extended life
Plunger Rods: are high strength stainless steel
Connecting Rods: One piece special alloy aluminum based, over sized for maximum strength, load disbursement, and long life.
Spotlight on the Bolt-N-Go special RKV4G37D-F24-C Pressure Washer Pump from Annovi Reverberi.
RKV4G37D-F24-C Pressure Washer Pump from Annovi Reverberi
Technical Specifications of the RKV4G37D-F24-C pressure washer from Annovi Reverberi:
Maximum volume: 4 GPM
Maximum discharge pressure: 3700 PSI
Horsepower: 9.75 GHP
Maximum pump speed: 3400 RPM
Hollow shaft I.D: 1″
Bore: 18mm
Stroke: 7.0 mm
Inlet port thread: 1/2″ FPT
Discharge port thread: 3/8″ FPT
Maximum fluid temperature: 140 F.
Crankcase oil capacity: 15 oz
Crankshaft ID stamp: 8
Weight: 21 lbs.
Features of the RKV4G37D-F24-C pressure washer from Annovi Reverberi:
Manifold of this RKV4G37D-F24-C: High strength forged brass for long term use
Bolts: Eight 8mm grade 8.8
Plungers on the RKV4G37D-F24-C: A special thick ceramic for long life, strong durability, and more resilience
Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
Bearings on this RKV4G37D-F24-C: Over sized tapered roller bearing for maximum life and load disbursement
Bearing Support: Precision die cast and machined to assure concentricity and alignment
Valves, Seats, and Springs: Stainless steel with specially designed Ultra Form cages to provide long life and positive seating
The RKV4G37D-F24-C has Seals and V-packing: Continuously lubricating for extended life
Plunger Rods: Stainless steel construction for strength, no plating to scrape off, back up and oring plunger sealing system
Connecting Rodson the RKV4G37D-F24-C: One piece special alloy aluminum for higher pressure, oversized for maximum strength, load disbursement, and long life
RKV4G37D-F24-C Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze over sized for strength and load disbursement. These RKV4G37D-F24-C pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
WARRANTY of this RKV4G37D-F24-C:
Annovi Reverberi (A.R.) cam shaft plunger pumps are warranted to the original purchaser for a period of 5 years from the date shipped from factory or U.S. warehouse. Warranty covers manufacturing defects or workmanship that may develop under normal use and service in a manner up to the directions and usage recommended by the manufacturer.
Warranty does not apply to misuse or when the RKV4G37D-F24-C pump or accessory is altered or used in excess of recommended speeds, pressures, temperatures, or handling fluids not suitable for pump or accessory material construction. Warranty does not apply to normal wear, freight damage, freezing damage, or damaged caused by parts or accessories not supplied by AR North America, Inc.
Liability of manufacturer for warranty is limited to repair or replacement at the option of the manufacturer when such products are found to be of original defect or workmanship at the time it was shipped from the factory. This warranty is in lieu of all other warranties, expressed or implied, including any warranty or merchantability and of any and all other obligations or liabilities on the part of the manufacturers or equipment.
ETS BOLT-N-GO PUMP PACKAGE SPECIAL!
EACH PUMP PACKAGE COMES INDIVIDUALLY PACKAGED, BRAND NEW – FACTORY TESTED! THIS PACKAGE CONSISTS OF ONE RKV4G37 3400 RPM D VERSION 1” (WITH GAS ENGINE FLANGE) PUMP WITH BOLT-ON STYLE UNLOADER (EITHER MINI-MATIC, GYMATIC OR VR35), CHEMICAL INJECTOR, THERMAL RELIEF VALVE (AKA PUMP GUARD), GARDEN HOSE THREAD & FILTER AND 3/8 IN. PLUG OUTLET.
JUST REMOVE YOUR OLD 1 IN. GAS ENGINE FLANGE PUMP AND BOLT THIS ONE ON!
Spotlight on this new pressure washer pump from Annovi Reverberi the RTX30
Annovi Reverberi Pressure Washer Pump RTX30
The RTX30 pressure washer pump from Annovi Reverberi Features:
MAX GPM 7.9
MAX L/Min 30
MAX PSI 4350
MAX BAR 300
Power EBHP 23.6
BORE DIA MM 20
Stroke DIA MM 23
Crankshaft ID 3
The AR Annovi Reverberi Pressure Washer Pump RTX30 features a forged nickel plated brass strength manifold with no porosity for long life. The plungers of the AR Annovi Reverberi Pressure Washer Pump RTX30 as a special aluminum oxide blend, with solid ceramic for long life and strength durability. The bearings are Over sized for load disbursement. The Oil seals are constructed of Buna-N Rubber. The o-rings have stainless steel garder springs to assure tension on the sealing surface. The plunger rods on the AR Annovi Reverberi Pressure Washer Pump RTX30 are made of stainless steel and the connecting rods are a heavy two piece aluminum, over sized for maximum strength , load disbursement and life. The crankshafts on the AR Annovi Reverberi Pressure Washer Pump RTX30 are forged and heat treated to add strength, durability and long life of these pumps from Annovi Reverberi.
Technical Specifications for the CAT Pump 5CP4120CSS – 5CP Plunger Pump:
4.5 gpm / 17 lpm
4000 psi/276 bar
1750 RPM
Belt Drive – standard pulley or clutch
Direct Drive – Bell Housing
Gearbox
CAT Pump 5CP4120CSS – 5CP Plunger Pump – Parts Breakdown
Cat Pumps releases the 5CP4120CSS plunger pump for your pressure washers and Hydro Excavating needs. This 4.5 GPM 4000 PSI 5CP4120CSS pump from CAT Pumps is a great addition to an already high preforming 5CP line of Pressure Washer pumps. All the CAT Pumps 5CP are built to last even in the harshest conditions and usage. This 5CP4120CSS pressure washer pump is no different. Get yours today. **Please note the rails are sold separately on this 5CP4120CSS plunger pump.
5CP4120CSS Plunger Pumps
5CP4120CSS Parts Breakdown
5CP4120CSS Service Manual
The 5CP4120CSS plunger pump Features:
Industrial triplex design offers reliability and versatility.
Ultra-compact direct-drive mount to motor using bell housing and flexible coupling
Optional belt-drive for precision flow setting on the 5CP4120CSS plunger pump.
Press-in seal cases for easy servicing.
Side and rear oil gauge for easy maintenance of this CP4120CSS plunger pump.
Low pressure seals and V-packings are completely lubricated and cooled to increase pump life.
Dimensions……………….29.5 x 24.33 x 12.00″ (750 x 618 x 305 mm)
Cat Pumps 6835 & 6835K parts breakdown
The CAT Pumps – 6835 & 6835K 68 FRAME BLOCK-STYLE PLUNGER PUMP are a triplex (Three plunger rods) positive displacement, reciprocating, plunger pump, constructed of a machined, 316SS block-style inlet and discharge manifolds, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These CAT Pumps – 6835 & 6835K 68 FRAME BLOCK-STYLE PLUNGER PUMPs are suitable for harsh liquids like saltwater and leachate, special sanitizing chemicals and food products.
The Cat Pumps 6835 & 6835K Features:
Triplex plunger of these CAT Pumps – 6835 & 6835k has a design that delivers high efficiency and low pulsation.
High integrity V-Packings of PTFE/Aramid fiber blend requires no-adjustment and provides long life with harsh liquids.
Pre-Set Lo-Pressure seals on these CAT Pumps – 6835 & 6835k provide secondary protection against external leaks and require no packing adjustment.
Special high-density, polished, concentric ceramic plungers provide a true wear surface and extended seal life.
Specially formulated seals and V-Packings on these CAT Pumps – 6835 & 6835k offer unmatched performance and seal life.
Wet-end is easily serviced without entering crankcase.
Availability:: available for order Product Code: 6835 or 6835K
Price subject to change on these Plunger pumps from Cat Pump
*Flushed 6835K Models: Special ported inlet manifold permits an external flush liquid providing cooling for Hi-Temp liquids and lubrication with low lubricity liquids.
Need parts for this pump? Just enter any part number from the following parts list into our search box for pricing and availability. 6500 SERIES PARTS LIST
HYPRO 6500C-AR Roller Pump Series 6500 6-Roller
HYPRO 6500C-AR Roller Pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids. The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps.
Construction on the HYPRO 6500C-AR Roller Pump features include a cast-iron, Ni-Resist or the new SilverCast™ body and Super Rotor, 416 stainless steel shaft, sealed factory-lubricated ball bearings, cartridge-type lip seals of Viton, Buna-N or leather, and versatile Super Rollers. (Super Rollers feature the life of polypropylene and the chemical resistance of nylon.) Rotation for all models is counterclockwise for easy tractor PTO drive, except models 4001 and 4101 which are clockwise. Pumps are available in reverse rotation.
HYPRO 6500C-AR Roller Pump WITH REVERSE ROTATION FOR GAS ENGINES, 21.8 GPM @ 300 PSI @ 1200 RPM. CAST IRON 6-ROLLER PUMP WITH SUPER ROLLERS, METALLIC ROTOR, VITON SEALS, 3/4″ NPT PORTS (OUTLET ON RIGHT SIDE, INLET ON LEFT SIDE) AND A SOLID 5/8″ SHAFT.
HYPRO 6500C-AR Roller Pumps Specifications:
Rollers: Super Rollers standard (Poly, Teflon andBuna-N available)
Housing: Cast Iron, Ni-Resist or Silvercast
Port size: 3⁄4″ NPT
Shaft size: 5⁄8″ solid
Pump shaft rotation: CCW (CW available)*
1″ hose barb inlet fitting for 1000 rpm operation
Shaft Seals: Viton standard (Buna-N available)
Rotor: Super Rotor standard (Cast Iron, Ni-Resist and Silvercast available.)
Float Operation Manual or Automatic Maximum Starts/Hour 20
Maximum Temperature (Continuous) 104°F (Intermitent) 140°F
Maximum Solids Diameter 2″ Weight (see charts) 32-52 lbs.
Dimensions (see charts)
Length 19.13-24.0″
Diameter 9.0″
Features of the CAT Pump 2K403 Submersible Pump:
CAT Pump 2K403 construction offers corrosion resistance and increases operating life over typical cast iron models.
Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
Lubricated double mechanical seals on the CAT Pump 2K403 offers dependable performance with a variety of liquids.
Air filled, continuous-duty motors for reliable, long term operation.
Single phase motor of the CAT Pump 2K403 features permanent split capacitor and thermal protection with automatic reset for added protection and extend motor life.
Versatile, reliable operation whether fully or partially submerged.
Multiple sizes from 1/2 to 2 hp offers application flexibility.
The CAT Pump 2K403 has a Sealed float switch for automatic operation
The CAT Pumps 2K403 Casing is 304SSL for durability over traditional cast iron.
Semi-open impeller is 304SSL on all models for long life, durability and economy.
Shaft on the CAT Pump 2K403 is 304SSL for dependable, long life.
Motor frame is 304SSL for dependability.
Fasteners of the CAT Pump 2K403 are all 304SS for durability.
Shaft Seals are special blend NBR and FPM for compatibility and long life.
This CAT Pump 2K403 has Sealed Bearings for longer life.
