RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump.
RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump
AR Annovi Reverberi Pressure Washer Pump RMW2.5G28-EZ, 2800PSI, 2.5GPM Annovi Reverberi Direct Drive Pump (Back Mount)
SKU: RMW2.5G28-EZ
Brand: Annovi Reverberi – AR North America
We do not have any mfg cross reference information available. However, RMW pumps fit most vertical engines (pump under the motor) with a 7/8″ straight keyed shaft.
• RMW pumps have a standard 22mm-14 twist connect outlet.
• Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.
RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump Features:
Annovi Reverberi / AR North America RMW2.5G28-EZ-SX, RMW 25G28-EZSX, RMW 2.5G28-EZSX Vertical Radial-Axial series replacement pump (Mounts under the engine)
Axial Cam Pump with Easy Start is smooth starting and maintenance free
Free thermal valve included with pump
Fits many models and units made by Briggs Power Products ( Brute, Craftsman, Generac, John Deere, Power Boss, Troy-Bilt, Etc.)
Note: This pump is Back Mounted and turned 180º (see 2nd picture) and is mostly used on pressure washers made by Briggs Power Products
NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump Specifications:
Vertical Mount with Gas Flange 3-7 HP
Max. Volume: 2.5 GPM
Max. Discharge Pressure: 2,800 PSI
Max. Pump Speed: 3,400 RPM
Shaft Diameter: 7/8” Hollow
Built In unloader and chemical injector
Built In easy start valve
Maximum Horsepower Requirements: 6.5 GHP
Inlet Port: 3/4″ FGH (garden hose)
Outlet Port: 22mm (Twist Connect)
Brass manifold
Stainless steel plungers
Pump comes with oil
See optional items below
Note: Engine shafts longer that 2” will require spacers or washers
Availability:: available for order Product Code: RMW2.5G28-EZ
Price subject to change. Price valid on this RMW2.5G28-EZ AR Annovi Reverberi Pressure Washer Pump, Use code 5off for 5% off all orders over $50.00
SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump.
SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump
This AR SJV2.5G25D-F7 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The SJV2.5G25D-F7 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
The SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump has the following Specifications:
Max GPM………………2.5
Max LMP…………………………9.5
Max PSI………………….2500
Max Bar………………………….170
Power EBHP……………4.5
Bore Dia. mm…………………….15
Stroke mm……………….5.8
Weight Lbs………………………..11
Max Temp……………….140°
Oil Capacity………………………4.5oz
Inlet Thread ……………1/2”M
Discharge Thread……………….22mm
SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump
This SJV2.5G25D-F7 AR Annovi Reverberi Pressure Washer Pump Features:
Manifold of the SJV2.5G25D-F7:
Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
Bolts: Three bolts, 10mm, grade 8.8.
Valves:
Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
Poppets, Seat and Spring: 303 and 400 series stainless steel.
Valve Caps of the SJV2.5G25D-F7: Machined brass for greater strength.
Packing and Plungers:
High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
Rear Cover: Precision die-cast, O-ring sealed. The housing on the SJV2.5G25D-F7 retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 4.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Wet End Repair: Very simple no special tools required.
Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
List Price: $430.00 Our Price: $288.53 Click to purchase the SJV2.5G25D-F7 pressure washer pump HERE! You save $141.47! Availability:: available for order Product Code: SJV2.5G25D-F7**
Price subject to change. Price valid on the SJV2.5G25D-F7 pressure washer pump 9/24/2012
Is this HR3030-113H GIANT PUMPS Triplex Ceramic Plunger Pump not the right Giant Pump for your Pressure Washer? Click the link to see all our Giant Pressure Washer Pumps.
The HR3030-113H GIANT PUMPS Triplex Ceramic Plunger Pump Features:
List Price: $375.00 Our Price: $288.56 Click the link to order this HR3030-113H GIANT Pump You save $86.44! Availability:: available for order Product Code: GIANT-HR3030-113H
Price subject to change. Price valid on this HR3030-113H GIANT PUMPS Triplex Ceramic Plunger Pump 9/17/2012
SXWA7G50 AR Annovi Reverberi Pressure Washer Pump.
SXWA7G50 AR Annovi Reverberi Pressure Washer Pump
SXWA7G50 Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material over sized for strength and load disbursement. These SXWA7G50 pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft.
The SXWA7G50 AR Annovi Reverberi Pressure Washer Pump has the following specifications:
Max GPM………………7
Max LMP…………………………26.5
Max PSI………………….5000
Max Bar………………………….345
Power EBHP……………24
Bore Dia. mm…………………….18
Stroke mm……………….21
Weight Lbs………………………..35
Max Temp……………….140°
Oil Capacity………………………32oz
Inlet Thread ……………1/2”F
Discharge Thread……………….3/8”F
The SXWA7G50 AR Annovi Reverberi Pressure Washer Pump Features:
Manifold:
– Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety, performance.
– Inlet and Discharge Ports: Heavy bosses for added strength.
– Offset Discharge Ports: High efficiency, smooth flow.
– Bolts: Eight bolts, 10mm, grade 8.8.
Valves:
– Ultra Form Cages: Durable, strength, and long life.
– Poppets, Seat and Spring: 303 and 400 series stainless steel.
– Valve Caps: Forged. Patented Valve Cap Design
Packing and Plungers:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
– Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
– Support and Guides: Machined brass, 2-piece construction to assure proper plunger alignment and to maximize packing and seal life.
– Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Over sized for maximum life and load disbursement
Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
Crankcase: Precision die-cast, large cross head for strength, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
Connecting Rods: Heavy 2-piece special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 32 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180ºF. Refer to breakdown.
Wet End Repair: Very simple no special tools required.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
Items NOT INCLUDED with your SXWA7G50 AR Annovi Reverberi Pressure Washer Pump that you may need:
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
You save $598.23! Availability:: available for order Product Code: SXWA7G50
Price Subject to change. Price valid on the SXWA7G50 AR Annovi Reverberi Pressure Washer Pump 9/10/2012
• The CAT Pump 2SFX29EL has a Triplex design that provides smoother liquid flow.
• Ultimate portability—less than 12 pounds—less than 10″ long.
• Your choice of motorized unit or hollow shaft pump only for direct mounting of the CAT Pump 2SFX29EL to gas or electric motor.
• Regulating Unloader with By-pass Hose is standard on each 2SFX29EL pump to assure system pressure control and pump protection.
• Optional Thermo Valve mounts directly into by-pass hose for optimum heat protection while in by-pass.
2SFX29ELS CAT Pump – Direct-Drive Plunger Pump
This 2SFX29ELS CAT Pump – Direct-Drive Plunger Pump Features:
Inlet Pressure Range…………. Flooded to 75 PSI (Flooded to 5.25 BAR)
Bore ………………………………… 0.708″ (18 mm)
Max. Liquid Temperature ……. 160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Crankcase Capacity ………….. 11.83 oz. (.35 L)
Inlet Ports (1) ……………………. 3/8″ NPTF (3/8″ NPTF)
Discharge Ports (2)……………. 3/8″ NPTF (3/8″ NPTF)
By-pass Port …………………….. 1/4″ NPTF (1/4″ NPTF)
Weight (Pump Only) ………….. 11.83 lbs. (4.8 kg)
Dimensions (Pump Only)……. 9.13 x 6.65 x 6.50″ (232 x169 x165mm)
Is the 2SFX29ELS CAT Pump – Direct-Drive Plunger Pump not the right plunger pump for your pressure washer? Click the link to see all out Plunger Pressure Washer Style Pumps.
Hydraulic Ports: 7/8″ 14UNF #10 SAE (on GM Series)
Motor: Internal Gear Gerotor
Hydraulic Motor Seal: Double-lip Teflon
Maximum flow: 63 GPM
Maximum pressure: 105 PSI
Maximum Hydraulic Flow: 3 GPM
Maximum Motor pressure: 3000psi
Maximum fluid temperature: 140° F | 60° C
Weight: 26 lbs / 11.8kg
HYPRO 9302ST-GM1 Centrifugal Pump
Is the HYPRO 9302ST-GM1 Centrifugal Pump not the correct pump for your needs? Click the link to see all our Hypro Pumps at Shopetsonline.com
List Price: $1,830.00 Our Price: $1,183.79 Click the link to order this Hypro Pump You save $646.21! Availability:: available for order Product Code: 9302ST-GM1
Price subject to change. Price valid on the HYPRO 9302ST-GM1 Centrifugal Pump 8/21/2012.
PowerLine® Plus HYPRO 2345B-P Plunger Pump – 2300 Series
Self-serve carwash and tunnel prep unit owners are making the switch to Hypro’s 2300 Series – 2345B-P Plunger Pumps. Backed by the best warranty in the industry, Hypro 2345B-P Plunger Pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.
Take a closer look at the features of the Powerline Series 2345B-P Plunger Pumps and see for yourself why Hypro is the best plunger pump manufacturer in the carwash industry.
The HYPRO 2345B-P Plunger Pump – 2300 Series has the following technical specifications:
Port sizes: 1/2″ inlet, 3/8″ outlet
Shaft: 3/4″ OD solid
Head material: Single-piece forged brass heads backed by lifetime warranty
Plunger rods: Hardened stainless steel lower-plungers – superior corrosion and wear resistance
Plunger rod guides: ZA27 piston guides give you larger bearing surface for extended life on oil seals and plungers
Valves: Precision-machined, stainless steel valve and seats provide higher resistance to chemical attack
Ball bearings: Longer lasting drive system with heavy duty ball bearings
Plungers: 100% ceramic plungers
Seals: Heavy-duty oil seals
Bases: Standard – C3 retrofit bases match Cat 310 and 5CP base footprints
Servicing: Hypro’s state-of-the-art, patented cartridge technology allows easy servicing of crankcase oil and all wet-end seals – remove only the pump head
Weight: 19 lbs./8.6 kg
Is this pressure washer pump not the correct Hypro Pump for your needs? Click the link for more Hypro Pressure Washer Pumps.
List Price: $789.00 Our Price: $518.92 Click the link to order the 2345B-P HYPRO Plunger Pump You save $270.08! Availability:: available for order Product Code: 2345B-P
Price subject to change. Price valid on the 2345B-P HYPRO Plunger Pump 8/3/2012.
Crankcase Oil Capacity ….4.7 fl. oz. (4.1 fl.oz. horizontal)
Temperature of Pumped Fluids….Up to 80 oF
Inlet Port ….1/2″ NPT
Discharge Ports ….3/8″ NPT
Shaft Rotation ….Either Direction2
Weight….9 lbs.
Width….8.325″
Height ….6.45″
Swash Plate Bore (Horizontal) …..3/4″ x 3/16″ Keyway
Swash Plate Bore (Vertical) ….7/8″ x 3/16″ Keyway
Valve Type ….Polyamide Plastic
1 A 25 PSIG minimum inlet pressure is required.
2 The GXRV2224-212 pump itself can be driven in either direction of rotation; however, the cooling fan on TEFC motors must always be positioned so that the cooling air is drawn from the non-drive end of the motor towards the pump.
Not the right GIANT Pump for your Pressure Washer? Click the link to see more GIANT Pressure Washer Pumps from ETS Company.
List Price: $270.00 Our Price: $207.77 Click to order the GXRV2224-212 Pump You save $62.23! Availability:: available for order Product Code: GIANT-GXRV2224-212
Price subject to change. Price valid on the GXRV2224-212 Pressure Washer pump 7/30/2012.
CAT Pump 3K191 – 3K Series – Single Stage Stainless Steel End-Suction Centrifugal Pump, 90GPM,126FT HD, W/NCC SEAL,1-1/2″X1″NPT.
• The CAT Pump 3K191 has a 304SSL liquid-end construction offers corrosion resistance and increases operating life over typical cast iron models.
• Unique bulge formed components eliminates harsh radius and welds and provides greater efficiency and durability.
• Back pullout design of the CAT Pump 3K191 permits easy repair of impeller and seal.
• High quality mechanical shaft seal and o-rings for a variety of standard or high temperature and chemical duty applications.
• Under casing foot mount and center line discharge of the CAT Pump 3K191 reduces misalignment and assures self-venting.
• Close coupled, motorized packages for compact and easy installation.
CAT Pump 3K191 – Stainless Steel Centrifugal Pump
This CAT Pump 3K191 Features:
Flow Range ……………………………………………..5.5 to 90.0 GPM
Pressure Range ……………………………………………………10 to 63 PSI
…………………………………………..23 to 145 Ft. Head
Max. Working Pressure ………………………………………………………….125 PSI
Min. Inlet Pressure to Prime …………………………………………………………Flooded
SXMV4G40D-F24 AR Annovi Reverberi Pressure Washer Pump.
SXMV4G40D-F24 AR Annovi Reverberi Pressure Washer Pump
PUMP MADE READY
FULLY PLUMBED AR Annovi Reverberi Pressure Washer Pump SXMV4G40D-F24
PUMPS MADE READY ARE NOT TESTED PRIOR TO SHIPPING. THE UNLOADER AND PRESSURE RELIEF VALVE MAY NEED ADJUSTING BEFORE USAGE. TESTING IS AVAILABLE ON 3400 RPM PUMPS MADE READY. SEE BAPL-6600 TO ADD TESTING TO CART.
SXMV4G40D-F24 AR Annovi Reverberi Pressure Washer Pump Features:
AL606EZ UNLOADER
BYPASS HOSE
PRESSURE RELIEF VALVE
4.0 GPM
3200 PSI
3400 RPM
GAS FLANGE (SAE J609)
1” HOLLOW SHAFT
GH INLET FITTING
QUICK CHANGE SOCKET
Is this SXMV4G40D-F24 AR Annovi Reverberi Pressure Washer Pump not the right pump for your pressure washer? Click the link to see more Annovi Reverberi Pumps.
List Price: $488.48 Our Price: $375.89 Click the link to order this Pressure Washer Pump. You save $112.59! Availability:: available for order Product Code: BAPL-6259
Price subject to change. Price valid on the SXMV4G40D-F24 Pump 7/16/2012.
