SXMV4G40D-F24 AR Annovi Reverberi Pressure Washer Pump.
SXMV4G40D-F24 AR Annovi Reverberi Pressure Washer Pump
PUMP MADE READY
FULLY PLUMBED AR Annovi Reverberi Pressure Washer Pump SXMV4G40D-F24
PUMPS MADE READY ARE NOT TESTED PRIOR TO SHIPPING. THE UNLOADER AND PRESSURE RELIEF VALVE MAY NEED ADJUSTING BEFORE USAGE. TESTING IS AVAILABLE ON 3400 RPM PUMPS MADE READY. SEE BAPL-6600 TO ADD TESTING TO CART.
SXMV4G40D-F24 AR Annovi Reverberi Pressure Washer Pump Features:
AL606EZ UNLOADER
BYPASS HOSE
PRESSURE RELIEF VALVE
4.0 GPM
3200 PSI
3400 RPM
GAS FLANGE (SAE J609)
1” HOLLOW SHAFT
GH INLET FITTING
QUICK CHANGE SOCKET
Is this SXMV4G40D-F24 AR Annovi Reverberi Pressure Washer Pump not the right pump for your pressure washer? Click the link to see more Annovi Reverberi Pumps.
List Price: $488.48 Our Price: $375.89 Click the link to order this Pressure Washer Pump. You save $112.59! Availability:: available for order Product Code: BAPL-6259
Price subject to change. Price valid on the SXMV4G40D-F24 Pump 7/16/2012.
CAT Pump 621 – 10 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 621 – 10 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 621 – 10 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
CAT Pump 621 – 10 Frame Piston Pump Breakdown
The CAT Pump 621 – 10 Frame Piston Pump Features:
Crankcase Capacity……………………………………….40 oz. (1.2 L)
Maximum Liquid Temperature …………………………160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Inlet Pressure Range ……………………….– 8.5 to +40 PSI (– 0.6 to +2.8 BAR)
Spotlight on the AR Annovi Reverberi Pressure Washer Pump XHW11.17N
AR Annovi Reverberi Pressure Washer Pump XHW11.17N
AR Annovi Reverberi Pressure Washer Pump XHW11.17N 2500PSI, 2.9GPM Solid Shaft Pump, 185º Hot Water.
AR Annovi Reverberi Pressure Washer Pump XHW11.17N are a combination of exceptional degree of technology and innovation. They deliver quality and reliability worthy of a leading brand on the market. The wide range of AR pumps include many models which vary in terms of pressure, delivery, power and technical characteristics, to satisfy widely different market demands.
The AR Annovi Reverberi Pressure Washer Pump XHW11.17N Features:
Manifold: Nickel plated forged brass.
Plungers: Special thick solid ceramic for long life, strong durability and more resilience.
Bearings: Over sized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation.
Valve, Seat and Springs: Stainless steel with specially designed ultra form material.
Seals and V-Packing: 185º Viton high temperature machined.
Plunger Rods: High strength stainless steel construction.
Connecting Rods: One-piece bronze special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
The AR Annovi Reverberi Pressure Washer Pump XHW11.17N has the following specifications:
Maximum volume: 2.9 GPM
Maximum discharge pressure: 2,500 PSI
Maximum pump speed: 1,450 RPM
Shaft diameter: 24 mm solid
Maximum horsepower requirements: 5.0 BHP
Maximum fluid temperature: 185ºF.
Inlet ports (2): 1/2″ FPT
Discharge ports (2): 3/8″ FPT
Drive side: Standard right
Weight: 14.0 lb.
List Price: $1,364.46 Our Price: $778.80 Click the link to order the XHW11.17N Pressure Washer Pump from Annovi Reverberi You save $585.66! Availability:: available for order Product Code: XHW11.17N Price subject to change. Price valid on the XHW11.17N – 6/27/2012
Annovi Reverberi / AR North America SHP15.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F.
The AR Annovi Reverberi Pressure Washer Pump SHP22.50HN Features:
High efficiency forged brass head & valve caps
Oversized “SKF” bearings are tapered for maximum life and load disbursement
Plungers are a special aluminum oxide blend, solid ceramic for long life
The AR Annovi Reverberi Pressure Washer Pump SHP22.50HN has the following specifications:
List Price: $2,910.90 Our Price: $1,798.95 Click to order the SHP22.50HS Pressure washer pump You save $1,111.95! Availability:: available for order Product Code: SHP22.50HN
Price subject to change. Price valid on the SHP22.50HN – 6/20/2012
4101XL-T3 Hypro Model – 4 Roller Silvercast with Polypropylene Rollers Spotlight!
4101XL-T3 Hypro Model
The 4101XL-T3 Hypro Model Features:
(4) Roller – Silvercast Pump with Polypropylene Rollers
Housing: Silvercast
Polypropylene (T3) Rollers come Standard on all of our pumps
Maximum flow: 7.2 GPM at 2600 rpm
Maximum pressure: 150 PSI
Shaft size: 5/8″ Solid Stainless Steel Shaft
Port size: 3/4″ NPT
Rotation: (CW)Clock Wise Rotation (CCW) also Available, See Options below
Maximum fluid temperature: 140° F
Weight: 5 pounds | 2.27 kg
Shaft seals: Viton standard (Buna-N,(M) available)
Locking collar and torque arm come in each 4101XL-T3 Hypro Model
Speed controller available See page 74 in the product catalog
Adaptable to PTOs or gas engines
Available PTO coupler: 1320-0016 5/8″ x 5/8″ hollow shaft adapter
Available shaft adapters See page 74 in the product catalog
Standard rotation on this 4101XL-T3 Hypro Model directly couples to gasoline engines
Self-priming operation, however roller pumps should not be run dry
Options Available for this 4101XL-T3 Hypro Model:
Teflon rollers – Add Suffix “T2”
Polypropylene rollers – Add Suffix “T3”
Buna-N Seals – Add Suffix “M”
Reverse Rotation – Add Suffix “R”
List Price: $478.00 Our Price: $320.29 Click the link to order this Hypro Pump. You save $157.71! Availability:: available for order Product Code: 4101XL-T3 Price subject to change. Price valid on this 410XL-T3 Hypro Pump 6/15/2012.
Our Price: $396.00 Sale Price: $198.53 Click the link to order this Comet Pressure Washer Pump You save $197.47! Availability:: available for order Product Code: 85.148.081B
Price Subject to change. Price valid on this BXD 2528 Pressure Washer Pump 6/13/2012
Is this GIANT PUMPS – HR2020-111H – Triplex Ceramic Plunger Pump not the right plunger pump for you? Click the link to see all our Plunger Pumps From Giant.
List Price: $375.00 Our Price: $288.56 Click the link to order this Giant HR2020-111H Pump. You save $86.44! Availability:: available for order Product Code: GIANT-HR2020-111H Price subject to change. Price valid on this Giant HR2020-111H Pressure Washer Pump 6/11/2012
The KF36A pump has been designed to pump fresh and filtered (360 micron max.) water at room temperature. Special versions are available for pumping water up to 185F and for reverse osmosis units.
The water temperature is critical for the pump life: the higher the water temperature, the more likely it is to create cavitation, resulting in premature seal and valve failures. For such conditions, use HT series pumps.
List Price: $8,400.00 Our Price: $6,463.80 Click the link to order this KF36A Pressure Washer Pump You save $1,936.20! Availability:: available for order Product Code: KF36A Price subject to change. Price valid on this KF36A Pressure Washer Pump 6/7/2012
Spotlight on the AR Annovi Reverberi Pressure Washer Pump XT9.14N
AR Annovi Reverberi Pressure Washer Pump XT9.14N
The AR Annovi Reverberi Pressure Washer Pump XT9.14N has the following Technical Specifications:
Max GPM……………… 2.37
Max LMP………………………… 9.0
Max PSI…………………. 2000
Max Bar…………………………. 140
Power EBHP…………… 3.3
Bore Dia. mm……………………. 18
Stroke mm………………. 8.4
Weight Lbs……………………….. 11
Max Temp………………. 140°
Oil Capacity……………………… 10oz
Inlet Thread …………… 1/2”F
Discharge Thread………………. 3/8”F
XT9.14N AR (Annovi Reverberi) Pump 2.37 GPM @ 2000 PSI.
XT9.14N Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
AR Annovi Reverberi Pressure Washer Pump XT9.14N
The AR Annovi Reverberi Pressure Washer Pump XT9.14N Features:
Manifold:
– Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety, performance.
– Inlet and Discharge Ports: Heavy bosses for added strength.
– Offset Discharge Ports: High efficiency, smooth flow.
– Bolts: Six Bolts, 6mm, grade 12.9.
Valves:
– Ultra Form Cages: Durability, strength and long life.
– Poppets, Seat and Spring: 303 and 400 series stainless steel.
– Valve Caps: Machined brass – greater strength.
Packing and Plungers:
– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
– Low Pressure Seals: “U” cup double lip Buna-N. Good positive seal.
– Support Guides: Machined brass one-piece construction to assure proper plunger alignment and to maximize packing and seal life.
– Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Oversized for maximum life and load disbursement, two ball bearings on the solid shaft series and a needle bearing on the drive side and ball on the non-drive side for the hollow shaft series. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: Precision die-cast, precision punched gasket sealed and bayonet style sightglass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel,
oversized for load disbursement.
Connection Rods: One piece special alloy aluminum based and bronze, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged one-piece, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: Flat cover 8 oz. and extended cover 10 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180º F. Refer to breakdown.
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
List Price: $571.65 Our Price: $358.91 Click the link to order this Pressure washer pump XT9.14N You save $212.74! Availability:: available for order Product Code: XT9.14N
Price subject to change. Price valid on thie XT9.14N pressure washer pump 6/6/2012
Spotlight on the AR Annovi Reverberi Pressure Washer Pump XWL-SS42.15N.
AR Annovi Reverberi Pressure Washer Pump XWL-SS42.15N
XWL-SS42.15N AR (Annovi Reverberi) Pump 11 GPM @ 2200 PSI.
In high frequency and long time operation, high accurate manufacturing technique is the only answer to the durable reputation Annovi Reverberi XWL-SS42.15N pumps. The S.S. Series uses include various applications such as reverse osmosis water desalination, seal gland flushing and waste water odor control. S.S. Series XWL-SS42.15N feature a SAE 316 stainless steel manifold this is totally corrosion-resistance. Special pumps features include our highly concentric bearing positioning on both sides of the crankcase, anticorrosion coated aluminum die cast crankcase, continuously lubricated Viton seals, triple lip loaded oils seals and our ultra thick ceramic plungers that will not crack.
The Annovi Reverberi Pressure Washer Pump XWL-SS42.15N has the following specifications:
Max GPM………………11
Max LMP…………………………42
Max PSI………………….2200
Max Bar………………………….150
Power EBHP……………15
Bore Dia. mm…………………….28
Stroke mm……………….17.2
Weight Lbs………………………..36
Max Temp……………….140°
Oil Capacity………………………32oz
Inlet Thread ……………3/4”F
Discharge Thread……………….3/8”F
XWL-SS42.15N-3 break down
The Pressure Washer Pump XWL-SS42.15N Features:
Manifold:
– 316L – Stainless Steel Block Style: Strength and no porposity = long life.
– Inlet and Discharge Ports: 1/2” inlet and 3/8” discharge.
– Offset Discharge Ports: High efficiency, smooth flow
– Bolts: 8 Bolts, 10mm, stainless steel.
Valves:
– Ultra Form Cages: Durable, strength, and long life.
– Poppets, Seat and Spring: 316 series stainless steel.
– Valve Caps: Machined 316L series stainless steel.
Packing and Plungers:
– High Pressure Packing: “Special profile” style (W-1) Viton (cotton duct weave base) strong and tightens under load.
– Low Pressure Seals: “W-2” style Viton, good positive seal.
– Support and Guides: Machined stainless steel, 1-piece construction with intermediate and guide rings to assure proper plunger alignment, maximize packing and seal life.
– Plungers: Special aluminum oxide blend, solid ceramic long life, strong and durable. Ultra thick with a locating step and SST retaining bolts.
Bearings: Premium oversized taper for maximum life and load dispersement.
Bearings Supports: Precision die-cast and machined to assure concentricity and alignment.
Crankcase: Precision die-cast, large cooling fins and covered with a special anti-corrosion finish.
Rear Cover: Precision die-cast, O-Ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen). This is an “AR” orginal. Oil drain plug.
Plunger Rods: Stainless steel construction for strength, back-up and O-ring plunger sealing system.
Special acorn style retaining nuts and SST slingers.
Rod Pins: Precision ground and hardened steel, oversized for load dispersement.
Connection Rods: 2-piece special alloy bronze for higher pressures, oversized for maximum strength, load dispersement, and life. Heavy pin area construction.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability. Available in 24mm solid shaft for gearbox drives. Shaft key set screws are standard on high-speed version for long shaft life.
Oil Seals and O-Rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-Rings have stainless steel garder springs for assure constant tension on the sealing surface.
Oil Drains: Quantity of 2. One in the rear cover and one in the bottom of the crankcase.
Oil Capacity: 32 oz.
Oil Sight Glasses: Rear cover and non-drive side bearing housing.
Dyno Proven: All pumps are dyno tested to assure the theroretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180°F.
Wet End Repair: Very simple no special tools are required.
Mounting Flanges: Multiple flanges are available.
Buna-N: Elastomers available.
Is this not the right pressure washer pump? Click the link to see all our XW Stainless Steel Series pressure washer pumps.
List Price: $5,356.49 Our Price: $3,304.46 Click the link to order this XWL-SS42.15N Pressure Washer Pump You save $2,052.03! Availability:: available for order Product Code: XWL-SS42.15N Price subject to change. Price valid on this XWL-SS42.15N – 6/4/2012
