pumps Archives - Page 29 of 39 - ETS Co. Pressure Washers and More!

October 28, 2011

HYPRO 9303S-HM4C Centrifugal Pumps

HYPRO 9303S-HM4C Centrifugal Pumps PUMP ASSY.

Hypro Series 9303S-HM4C Hydraulic Motor Drive centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc.

Hypro Series 9303S-HM4C hydraulic motor-driven centrifugal pumps provide smooth performance. The Series 9303S-HM4C can be conveniently mounted on the tractor or sprayer, becoming part of the vehicle’s hydraulic system and freeing the PTO for other uses. The Hypro “close-coupled” design reduces the mounting space required, eliminating long shafts and couplers between the Series 9303S-HM4C pump and motor.

This broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless steel Series 9303S-HM4C pumps are ideal for use with Roundup® or other acid applications.

HYPRO 9303S-HM4C Centrifugal Pumps PUMP ASSY Features:

Max. flow: 97-147 gpm/367-556 lpm (free flow)
9303S-HM4C: 115 gpm/435 lpm
Max. pressure: 130-145 psi/9.0-10.0 bar (Shut off) (in closed center operation)
9303S-HM4C: 93 psi/6.4 bar
Max. fluid temperature: 140°F/60°C
Hydraulic motor drive (for open and closed center systems)
Housing: cast iron or stainless steel
Port sizes: 1 1⁄2″ NPT inlet, 1 1⁄4″ NPT outlet
Impeller: Cast Iron models – glass-filled nylon; Stainless Steel models – polypropylene
Pump seals: Cast Iron models – Viton/ceramic are standard; Stainless Steel models – Life Guard™ silicon carbide (Buna-N/ceramic and Viton/silicon carbide are available)
Weight: 26 lbs./11.8 kg
Motor: internal gear gerotor
Motor capacities: 4-24 gpm/15.1-90.8 lpm
9303S-HM4C: 6-9 gpm/34-38 lpm
Max. motor psi: 2000 continuous duty, 2200 intermittent duty
Hydraulic ports: 1⁄2″ NPT
Hydraulic motor seal: double-lip Teflon

List Price: $1,878.00
Our Price on the HYPRO 9303S-HM4C Centrifugal Pump: $1,214.45
You save $663.55!
Availability:: available for order
Product Code: 9303S-HM4C
Hypro Pressure Washer Pump
PRICE SUBJECT TO CHANGE ON THIS HYPRO 9303S-HM4C Centrifugal Pump, PRICE VALID 10/28/2011

October 28, 2011September 23, 2014

AR2233 Kit,Valve: Annovi Reverberi RM Series Pressure Washer Pumps

The AR2233 Valve Kit for all Annovi Reverberi RM Series Pressure Washer Pumps.

AR2233 Valve repair kit for RMW series of pumps from Annovi Reverberi.

This AR2233 is for models RMW2G20, RMW2.2G24, RMW2G23B, RMW2G24, RMW2G25, and RMW2.2G20D only. AR VALVE KIT AR2233 CONTAINS 6 VALVE ASSEMBLIES AND O-RINGS TO SERVICE 3 CYLINDERS ON YOUR AR PRESSURE WASHER PUMP.

The AR2233 work with all Annovi Reverberi RM Series Pressure Washer Pumps. These Annovi Reverberi plunger pump will pump up to 2.5 GPM at 2500 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” and 7/8″ shaft 1.1 – 5.5 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Flows: 2 to 2.5 GPM Pressure to: 2500 PSI Speeds: 3400 rpm Shaft Styles: Hollow Shaft 3/4″ and 7/8″.

While these AR2233 valves might seem small and insignificant, they play a vital roll in the Annovi Reverberi RM and RMW pumps being able to build up pressure to allow the operator to finish their project quickly and economically. So if your a contractor who’s RM annovi reverberi pump run pressure washer is lacking the power to pressure clean, look at these valves first. If they seem worn or missing replace them with the genuine repair kit AR2233 from ETS Co. and Annovi Reverberi.

List Price: $12.09
Our Price for the AR2233: $7.45 Click here to order!
You save $4.64!
Availability:: available for order
Product Code: AR2233
PRICE SUBJECT TO CHANGE. PRICE VALID ON AR2233 10/28/2011

October 27, 2011October 27, 2011

BE CD-3024HTEBCOM Pressure Washer 24HP 3000psi Truck Mount Comet TW8030 Pump

The CD-3024HTEBCOM BE pressure washer is a heavy duty gas power washer that features a reliable 24 HP Honda GX690 Engine, to go along with a high quality Comet TW8030 Washer pump. The CD-3024HTEBCOM BE pressure washer is a Truck Mounted pressure washer for property and small business owners, construction workers and handymen.

The CD-3024HTEBCOM BE pressure washer Features:

The CD-3024HTEBCOM BE pressure washer has 3000 PSI Max Pressure (275 BAR).
8.0 GPM Max Flow (15.2LPM).
The CD-3024HTEBCOM BE pressure washer comes with Dual outlets with shutoff valves to easily run two spray guns at once.
The CD-3024HTEBCOM BE pressure washer is Powered by a commercial-grade 24HP Honda GX670 gas engine with steel gas tank & engine oil alert.
Industrial Aluminum frame with anti-vibration rubber feet easily mounts to truck/trailer bed.
Pump features adjustable pressure unloader, external bypass hose, & thermal relief valve.
The CD-3024HTEBCOM BE pressure washer has Cooldrive technology is designed to keep the pump cool to help protect the pump from overheating.
Cool air is draw in over the pump reducing the heat by 25%.
The CD-3024HTEBCOM BE pressure washer comes standard with a Comet TW8030 Pump.

This CD-3024HTEBCOM BE pressure washer has the following technical specifications:

24 HP Honda GX690
PSI 3000
GPM 8.0
Comet TW8030 Pump

List Price: $5,598.00
Our Price on This CD-3024HTEBCOM BE pressure washer: $3,998.00
You save $1,600.00!
Availability:: available for order
Product Code: CD-3024HTEBCOM
BE Pressure Washer
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CD-3024HTEBCOM BE pressure washer 10/27/2011

Don’t forget in order to help you with your endeavor to winterize this CD-3024HTEBCOM BE pressure washer or any other pressure washer and it’s pump we at shopetsonline are offering you 10% off every purchase over $100 from Oct 26th 2011 – Nov 18th 2011!

Just enter the code “winterize” at check out on your order over $100.00 at shopetsonline and the supplies you need to winterize your pressure washer will be 10% OFF!

October 26, 2011October 27, 2011

Winterize your Pressure Washer and get 10% off $100 or more.

Don’t let it sit, winterize your pressure washer!

It’s almost winter time and you need to protect your biggest investment, your pressure washer. This blog will show you step by step instructions on how to winterize your pressure washer.

Most people don’t winterize their pressure washer, more precisely their pump. Left over liquid in the pump freezes when temperatures drop, expands, and then causes real damage. So if you want to get the maximum life out of your pump and don’t want to purchase a new pump or pay for pump repair parts, following these instructions to winterize your pressure washer and it could save you time and money.

Whenever storing a pump for extended periods or between use in cold climates you need to winterize your pressure washer, drain all pumped liquids from the pump and flush the liquid-end with an antifreeze solution to prevent freezing and damage to the manifold or pump. Do not pump with frozen liquid in the pump.

Standard Shut Down to winterize your pressure washer

• To begin to winterize your pressure washer, flush pump and chemical injector with fresh water. • Turn off power supply. • Squeeze trigger gun to relieve line pressure. • Disconnect Inlet and Discharge Plumbing.

How System Flush to winterize your pressure washer

• Connect a short 4 foot hose to the pump inlet for units without a float tank and place the other end of the hose in a container with 50% water and 50% antifreeze.• For units WITH a float tank, pour anti-freeze mixture directly into tank to start to winterize your pressure washer.• Start the unit and run until the antifreeze flows out the discharge of the pump.• Allow unit to go into bypass at least one time to circulate anti-freeze (release trigger gun to activate bypass). • Shut the unit off and disconnect the hose from the pump inlet you have now completed the last step to winterize your pressure washer. • Store unit (do not install plugs in the inlet and discharge port). • Cover to protect from severe elements.

Restarting System after you properly winterize your pressure washer • Turn regulator/unloader setting to lowest pressure point. • Check crankcase oillevel and purity. • Reconnect the liquid supply line, discharge line and allow liquid to flow through pump for 2-3 minutes. • Check for leaks at all plumbing connections. • Turn crankshaft by hand initially (this step is only for BELT DRIVE pressure washer pumps). If free moving, start power. • Gradually reset regulator/unloader in small increments to desired system pressure and resume operation. • Follow your established maintenance cycle or the standard Preventative Maintenance Check List in the pump service manual.

In order to help you with your endeavor to winterize your pressure washer and it’s pump we at shopetsonline are offering you 10% off every purchase over $100 from Oct 26th 2011 – Nov 18th 2011!

Just enter the code “winterize” at check out on your order over $100.00 at shopetsonline and the supplies you need to winterize your pressure washer will be 10% OFF!

October 25, 2011March 21, 2014

GENERAL PUMP TH3020G

GENERAL PUMP TH3020G , 3.0 GPM @ 2000 PSI @ 3600 RPM

Need parts for this pump? Click here for the datasheet.

The GENERAL PUMP TH3020G , 3.0 GPM @ 2000 PSI @ 3600 RPM Features:

Extended-life design for light commercial duty use
Heavy duty die-cast aluminum housing
Integrated flow sensing unloader, to avoid the liability of having a pressurized hose after the engine is shut off
Integrated mounting manifold for efficient power transmission and heat dissipation
Triplex plunger design for smooth operation
Fixed chemical injector
Forged brass manifold

The GENERAL PUMP TH3020G , 3.0 GPM @ 2000 PSI @ 3600 RPM has the following specifications:

Maximum Volume: 3.0 GPM
Maximum Discharge Pressure: 2000 PSI
Maximum Pump Speed: 3600 RPM
Inlet Pressure 1 – 100 PSI
Bore: .591 in. / 15 mm
Stroke: .254 in / 6.46 mm
Crankcase oil Capacity: 6.75 oz.
Maximum Fluid Temperature: 140 F
Inlet Port Thread: 1/2″ NPT-M
Discharge Port Thread: 3/8″ – 19 BSPP-M
Shaft Diameter 3/4″
Weight: 9.25 lbs
Dimensions: 7.5″ x 7.0″ x 9.0″

List Price: $517.30
Our Price: $398.06 Click for more info.
Replacement Pump Comet BXD2528
You save $119.24!
Availability:: available for order
Product Code: TH3020G ( GENERAL PUMP TH3020G )
GENERAL Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID 10/25/2011

October 25, 2011

LANDA – CAT PUMP 1LX100 (1.0/500, 1725 RPM) – 8.702-383.0

The LANDA – CAT PUMP 1LX100 (1.0/500, 1725 RPM) – 8.702-383.0 Features

Low amp draw for compatibility with portable machines.
Smooth, quiet operation for sound sensitive areas.
Special Hi-Pressure and Lo-Pressure Seals offer exceptional life.
RTP heat resistant liquid-end and Regulator.
Mechanically actuated plungers offer greater efficiency.
Optional direct-coupled motors for compact, easy assembly or convenient belt-drive mounting.
Ready for initial start-up with oil in the crankcase.

CAT PUMP 1LX100 parts breakdown Click here —>

This LANDA – CAT PUMP 1LX100 (1.0/500, 1725 RPM) – 8.702-383.0 has the following technical specifications:

Flow ………………………………………………….1.0 GPM (3.8 L/M)
Stroke……………………………………………………..0.29″ (7.4 mm)
Max. Discharge Pressure ……………………..500 PSI (35 BAR)
Inlet Pressure Range ……………..Flooded to +20 PSI (Flooded to +1.4 BAR)
RPM ………………………………………………1725 RPM (1725 RPM)
Bore………………………………………………………..0.47″ (12 mm)
Crankcase Capacity ……………………………..2.23 oz. (66 ml)
Max. Liquid Temperature …………………………160°F (71°C)
Inlet Fitting (1)…………………………………..3/8″ NPTF (3/8″ NPTF)
By-Pass Ports (1)………………………………1/4″ NPTF (1/4″ NPTF)
Discharge Ports (1)……………………………1/4″ NPTF (1/4″ NPTF)
Discharge Fitting (1LXXC100 Only)……..3/8″ NPTF (3/8″ NPTF)
Weight………………………………………………..2.65 lbs. (1.2 kg)
Dimensions………………………………..4.4 x 3.2 x 8.4″ (112 x 81 x 212 mm)

List Price: $565.84
Our Price: $424.06
You save $141.78!

Availability:: available for order
Product Code: LAN-8.702-383.0 (CAT PUMP 1LX100)
PRICE SUBJECT TO CHANGE. PRICE VALID 10/25/2011

INSTALLATION ON THIS CAT PUMP 1LX100:
Each CAT PUMP 1LX100 comes with oil in the crankcase ready for start-up. CAT PUMPS special premium grade, multi-viscosity crankcase oil should be used. It is recommended to install this pump in a horizontal position with the oil filler cap at the top. It is permissible to rotate the oil filler cap to the right or left, however, some oil spitting may occur. A rubber plug is inserted into the oil filler cap for shipping. This should be removed before operation. Do not operate pump with plug in cap. Flexible hose should be installed at the unloader ports. Connect a hose equal to or one size larger than the inlet port at the bottom of the pump body. Connect a high pressure hose to the regulator discharge port at the side of the regulator. Connect a by-pass hose to the bottom port of the regulator or unloader and run to drain or back to a “T” in the inlet line. CAUTION: Do not over tighten the RTP pump or regulator body.

OPERATION of the CAT PUMP 1LX100:
Once the inlet water supply is turned on and the pump is started, adjust the regulator at the top with an allen wrench or turn adjusting cap on the unloader to set system pressure. Do this in small increments until the desired system operating pressure is reached. The CAT PUMP 1LX100 are axial plunger pumps. Special direct-drive motors are secured to the pump with a V-Clamp Mounting. The optional Drive Mount Assembly is required for the belt drive 1LXB100 model. The motor on the CAT PUMP 1LX100 rotates the offset cam and guide plate which is connected to the three plungers. Each plunger moves forward at a different stage of the cam rotation, providing a smooth, forward, liquid flow through the pump. On the back stroke, the liquid enters the inlet chamber and flows through each inlet valve. As the forward stroke begins, the inlet valve closes. On the forward stroke, the liquid goes through the seat and forces the discharge valve open to allow the liquid out the regulator discharge port.

October 20, 2011October 25, 2011

CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump

CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump.

Triplex plunger design delivers smoother liquid flow. Hi-Pressure Seals are completely lubricated and cooled by the liquid being pumped. Inlet and discharge valve assemblies interchange for easier maintenance. Lubricated Lo-Pressure Seal provides double protection against external leakage. Oil bath crankcase assures optimum lubrication. Close tolerance concentric of the ceramic plunger maximizes seal life.

The CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump Features:

Triplex design offers high efficiency and low pulsation.
Durable high pressure seals are lubricated and cooled by pumped liquid.
Pre-set Lo-Pressure Seals provide secondary protection against external leaks and require no packing adjustment.
Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
Specially formulated seals offer unmatched performance and extended life.
Optional STHT, FPM and EPDM elastomers for compatibility with many liquids and temperatures up to 200°F.
Convenient press in style seal case and interchangeable inlet and discharge valves for easy servicing
Wet-end easily serviced without entering crankcase.

The CAT Pump 3CP1130 Ceramic Plunger Pressure Washer Pump has the following specifications:

Inlet Pressure Range…………………Flooded to 70 PSI (Flooded to 4.9 BAR)
Bore…………………………………………………………………0.709” (18 mm)
Crankcase Capacity……………………………………….12 oz. (0.35 L)
Standard Liquid Temperature……………………..160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Inlet Ports (2)…………………………………………..1/2” NPTF (1/2” NPTF)
Discharge Ports (2)…………………………………3/8” NPTF (3/8” NPTF)
Pulley Mounting……………………………………Either Side (Either Side)
Shaft Diameter………………………………………………0.650” (16.5 mm)
Weight………………………………………………………14.84 lbs. (6.7 kg)
Dimensions…………………………………..9.1 x 8.78 x 5.47” (231 x 223 x 139 mm)
Flow……………………………………………………………..2.4 gpm (9 lpm)
Pressure Range………………………………100 to 2200 psi (7 to 155 bar)
RPM…………………………………………………………..1725 rpm (1725 rpm)
Stroke………………………………………………………………0.276” (7 mm)

3CP1130

Parts Breakdown {click image to left}

Service Manual {Click image to left}

Our Price: $910.00
CALL 1-877-824-7763 FOR A BETTER PRICE!
Call 1-877-824-7763 {Smart Phones Click to Call}
Availability:: available for order
Product Code: 3CP1130
CAT Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID 10/20/2011

October 19, 2011October 25, 2011

Annovi Reverberi RMW2G24D-PKG – pump package

The Annovi Reverberi RMW2G24D-PKG – pump package Features:

RMW2G24D – Pump
Max PSI: 2400
Max GPM: 2
RPM: 3400
7/8″ Hollow Shaft
Vertical Gas Engine Flange
TPP140-1/4A – Thermal relief valve
AR1269120 – Detergent tube with filter

List Price: $243.26
Our Price: $156.74
You save $86.52!
Availability:: available for order
Product Code: RMW2G24-PKG
Annovi Reverberi RMW2G24D-PKG – pump package
PRICE SUBJECT TO CHANGE. PRICE VALID 10/19/2011

October 18, 2011October 25, 2011

Annovi Reverberi RMW22G24SX-PKG

Annovi Reverberi RMW22G24SX-PKG pump package

This RMW2.2G24-SX-PKG plunger pump will pump up to 2.2 GPM up to 2600 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8″ shaft 1.1 – 5.5 HP engines. The hollow shafted pump includes a built-in pressure control valve, thermal relief valve and chemical injection system. App. 6 1/2″ Tall.

RMW2.2G24-SX-PKG annovi reverberi pressure washer pumps are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands

Annovi Reverberi’s Axial series pumps come with a special formulated Synthetic pump oil that contains anti-wear, rust inhibitor and deoxidizer additives designed to last 500 hours.

The Annovi Reverberi RMW22G24SX-PKG Features:

RMW22G24-EZ-SX – Pump
Max PSI: 2400
Max GPM: 2.2
RPM: 3400
7/8″ Hollow Shaft
Vertical Gas Engine Flange – Rotated 180° from Standard
TPP140-1/4A – Thermal relief valve
AR1269120 – Detergent tube with filter

List Price: $253.86
Our Price: $163.27
You save $90.59!

Availability:: available for order
Product Code: RMW22G24SX-PKG
Annovi Reverberi Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID 10/18/2011

October 17, 2011October 26, 2011

General Pump TT2028GBF 2.85 GPM 2000PSI 3/4″ GAS

General Pump TT2028GBF

The GENERAL PUMP TT SERIES TT2028GBF TRIPLEX PRESSURE WASHER PUMP Features:

Triplex Plunger Pump
Direct Drive Gas Flange
Maximum Volume: 2.85 GPM
Maximum Discharge Pressure: 2000 PSI
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 5.9 hp for gas engine
Bore: .591″ (15mm)
Stroke: .260″ (6.6mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165 degrees F.
Inlet Port Thread: 3/8″ FPT
Discharge Port Thread: 1/4″ FPT
Shaft Diameter: 3/4″ Gas Flange
Dimensions: 7.0″ x 7.2″ x 5.5″
Weight: 9 lb.
Lubrication: Fill the crankcase to oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter

GENERAL PUMP TT SERIES TT2028GBF TRIPLEX PRESSURE WASHER PUMP HAS
3/4” HOLLOW SHAFT     GAS ENGINE FLANGE
2.8 GPM       2000 PSI      3400 RPM
THE TT2028GBF COMES STANDARD WITH FORGED BRASS MANIFOLD WITH EXCLUSIVE LIFETIME WARRANTY
INLET 3/8″ FPT          OUTLET 1/4” FPT
THE GENERAL PUMP TT SERIES TT2028GBF TRIPLEX PRESSURE WASHER PUMP IS COVERED BY GENERAL PUMP FIVE YEAR WARRANTY, PLUS LIFETIME ON THE MANIFOLD

The following statement is intended to assist our customers in understanding the terms of General Pump’s warranty, the circumstances under which they will honor claims, and the procedure for making such claims.

General Pump/US warrants each pump to be free of defects in material or workmanship for a period of five (5) years from the date of shipment. In addition, General Pump/US warrants all forged brass pump manifolds to be free of defects in material and workmanship and from damage resulting from freezing for the life of the pump. Liability on this warranty is on all non-wear parts and limited to the repair or replacement of any pump returned to General Pump/US which upon inpsection is judged to be defective due to workmanship or material failure.
In the course of marketing or servicing the customer or potential customer’s needs, General Pump/US will use its best judgment in its recommendations. However, the ultimate responsibility for product application decisions shall rest with the customer. the sole and only warranty made by General Pump/US is the limited warranty described above. General Pump/US makes no other warranty or warranties of any kind, express or implied, including any implied warranty or merchantability or of any fitness for a particular use or purpose.General Pump/US disclaims and denies any liability for any direct, indirect, special, incidental or consequential damages which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight or other charges not expressly included herein. the only liability and the total liability of General Pump/US under this limited warranty or in any claim regarding or involving General Pump/US is expressly limited to the replacement of or purchase price of the product.
The following items are NOT warranted, due to matters beyond General Pump/US control.
Normal wear and tear to parts that are considered standard wear parts.
Defects caused by the fault or negligence of the buyer or third party.
Use of unauthorized repair parts, or; modifications made by the customer.

List Price: $439.48
Our Price: $338.18
You save $101.30!
Availability:: available for order
Product Code: BAPL-3583
GENERAL Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID 10/17/2011