Tag: pumps

Posted on

AR Annovi Reverberi Pump RRV4G36D-F24 – Pressure Washer Pump

These new Annovi Reverberi Pressure Washer  Pumps –  RRV4G36D-F24 feature a new rod design, large side cover sight glass, ceramic plungers, high quality high pressure seals, new, low-pressure seal with scraper (patented), two piece plunger guides, forged brass high efficiency head design and new styling. Flows to 5.5 GPM, Pressure to 3600 PSI, RPM 1450, 1750 & 3400. The pumps come in three drive types: 24mm solid, 1” and 1-1/8” hollow shaft. Drivers: electric, gasoline, hydraulic or diesel.

Annovi Reverberi RRV4G36D-F24 - Pressure Washer Pump
Annovi Reverberi RRV4G36D-F24 - Pressure Washer Pump

The Annovi Reverberi RRV4G36D-F24 – Pressure Washer Pump Features:

  • Manifold: High strength forged brass for long term use.
  • Bolts: Eight 6mm.
  • Plungers: NEW Ceramic Plungers, thicker wall to help prevent thermal shock.
  • Valves: Stainless Steel, valve seat o-ring is side mounted.
  • Seals: High quality high pressure seals. NEW low-pressure seal with a built in scraper.
  • Piston Guides: Two piece piston guides.
  • Drive End: NEW connecting rod with 12% more load surface.
  • Large side cover sight glass, oversized bearing. Rear cover oil drain.
  • Crankshaft: Forged, precision ground.

The Annovi Reverberi RRV4G36D-F24 – Pressure Washer Pump has the following technical specifications:

  • Max GPM……………… 4.0
  • Max LMP………………………… 15.1
  • Max PSI…………………. 3600
  • Max Bar…………………………. 248
  • Power EBHP…………… 9.9
  • Bore Dia. mm……………………. 15
  • Stroke mm………………. 9.2
  • Weight Lbs……………………….. 18
  • Max Temp………………. 140°
  • Oil Capacity……………………… 13.35oz
  • Inlet Thread …………… 1/2”F
  • Discharge Thread………………. 3/8”F

List Price: $576.80
Our Price: $362.08 
You save $214.72!

Availability:: available for order
Product Code: RRV4G36D-F24
AR Pressure Washer Pump

Posted on

CAT Pump 280 – 3 Frame Piston Pump – Pressure Washer Pump

CAT Pump 280  – 3 Frame Piston Pump Brass Model – Pressure Washer Pump, 3.0/1000, 1330 RPM, BBCP.

Need parts for the CAT Pump 280  – 3 Frame Piston Pump Brass Model – Pressure Washer Pump?
Click here for the datasheet.
Click here for servicing instructions.

CAT Pump 280 - 3 Frame Piston Pump - Pressure Washer Pump
CAT Pump 280 - 3 Frame Piston Pump - Pressure Washer Pump

This pressure washer pump – CAT Pump 280 – 3 frame piston pump has the following Features:

  • Triplex UNIFLOW design provides a smooth, low-pulsation flow with strong suction capabilities.
  • Hard chrome-plated 304S cylinders and sleeves provide long life with mild liquids within a range of 5-9 PH.
  • Optional 316 Stainless Steel manifolds for added strength and corrosion resistance.
  • Optional FPM and PTFE elastomers for liquid compatibility.

The CAT Pump 280 – 3 Frame Piston Pump – Pressure Washer Pump has the following specifications:

  • Inlet Pressure Range…………………–8.5 to 40 psi (–0.6 to + 2.8 bar)
  • Bore…………………………………………………..0.787” (20 mm)
  • Crankcase Capacity……………………………..10 oz. (.3 l)
  • Maximum Liquid Temperature……………….160°F (71°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Port (1)…………………………………..1/2” NPTF (1/2” NPTF)
  • Chemical Injection Port (1)………………1/4” NPTF (1/4” NPTF)
  • Discharge Ports (2)…………………………3/8” NPTF (3/8” NPTF)
  • Discharge Port (1)…………………………..1/2” NPTF (1/2” NPTF)
  • Pulley Mounting……………………………..Either side (Either side)
  • Shaft Diameters…………………………………..0.650” (16.5 mm)
  • Dimensions (280)……………..10.63 x 8.79 x 5.30” (270 x 223 x 134.5 mm)
  • Dimensions (290)……………..10.83 x 8.79 x 5.30” (275 x 223x 134.5 mm)
  • Flow…………………………………………3.0 gpm (11.4 l/m)
  • Pressure Range………………100 to 1000 psi (7 to 70 bar)
  • RPM………………………………………1330 rpm (1330 rpm)
  • Stroke………………………………………..0.394” (10 mm)
  • Weight…………………………………….11.7 lbs. (5.3 kg)

List Price: $925.58
Our Price: $712.23 
You save $213.35!
Availability:: available for order
Product Code: BAPL-4467
PSI: 1000
GPM: 3
CAT Pressure Washer Pump

Posted on

AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump

AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump WITH EASY START VALVE has: 2.2 GPM 2400 PSI 3400 RPM GAS ENGINE FLANGE BUILT-IN PRESSURE CONTROL & CHEMICAL INJECTOR

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has the following: INPUT: FEMALE GARDEN HOSE OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT), CONVENIENT CONNECTION TO MOST 7/8″ SHAFT ENGINES, PUMP IS PREFILLED WITH OIL.

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has START VALVES ALLOW FOR EASY ENGINE STARTING.

This AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump is COVERED BY AR ONE YEAR WARRANTY.

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump Features:

  • Annovi Reverberi /AR North America RMW2.2G24-EZ, RMW 22G24-EZ, RMW 2.2G24-EZ Vertical Radial-Axial series replacement pump (Mounts under the engine)
  • Axial Cam Pump with Easy Start is smooth starting and maintenance free
  • Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 2nd image)
  • NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
  • Some Briggs models and units made by Briggs Power Products ( Brute, Craftsman, John Deere, Troy-bilt, Etc.) are Back Mounted / turned 180º (see RMW2.2G24-EZSX)
  • RMW pumps fit most vertical engines (pump under the motor) with a 7/8″ straight keyed shaft.
  • RMW pumps have a standard 22mm-14 twist connect outlet.
  • Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has the following specifications:

  • Vertical Mount with Gas Flange 3-6 HP
  • Max. Volume: 2.2 GPM
  • Max. Discharge Pressure: 2,400 PSI
  • Max. Pump Speed: 3,400 RPM
  • Shaft Diameter: 7/8” Hollow
  • Engine shafts longer that 2” will require spacers or washers
  • Built In unloader and chemical injector
  • Built In easy start valve
  • Maximum Horsepower Requirements: 5.0 GHP
  • Inlet Port: 3/4″ FGH (garden hose)
  • Outlet Port: 22mm (Twist Connect)
  • Aluminum manifold w/aluminum valve plugs
  • Stainless steel plungers
  • Pump comes with oil
  • Weight: 5.1 lb.
AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump
AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump

List Price: $244.01
Our Price: $157.21  RMW2.2G24-EZ
You save $86.80!
Availability:: available for order
Product Code: RMW2.2G24-EZ
Annovi Reverberi Pressure Washer Pump

Posted on

Annovi Reverberi Pressure Washer Pump RKA4G40HN

Annovi Reverberi Pressure Washer Pump RKA4G40HN4 GPM @ 4000 PSI.
Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation.  Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
Annovi Reverberi Pressure Washer Pump RKA4G40HN
Annovi Reverberi Pressure Washer Pump RKA4G40HN

The Annovi Reverberi Pressure Washer Pump RKA4G40HN Features are:

  • Forged Brass: Strength and no porosity long life. higher hydrostatic pressures – safety, performance.
  • Inlet and Discharge Ports: Heavy bosses for added strength.
  • Offset Discharge Ports: High efficiency, smooth flow.
  • Bolts: Eight bolts, 8mm, grade 8.8.
  • Valve Caps: Stainless steel on pumps rated at 3200 PSI and higher, better hydrostatic loads. Machined brass on pumps <3200 PSI.
  • Ultra Form Cages: Durable, strength, and long life.
  • Poppets, Seat and Spring: 303 and 400 series stainless steel.
  • High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
  • Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life.
  • Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
  • Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
  • Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
  • Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
  • Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
  • Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and Oring plunger sealing system.
  • Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
  • Connecting Rods: One-piece special alloy aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
  • Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
  • Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
  • Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
  • Oil Capacity: 15.5 oz.
  • Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
  • Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
This Annovi Reverberi Pressure Washer Pump RKA4G40HN has the following specifications:
  • Max GPM……………… 4
  • Max LMP………………………… 15.1
  • Max PSI…………………. 4000
  • Max Bar…………………………. 275
  • Power EBHP…………… 11
  • Bore Dia. mm……………………. 18
  • Stroke mm………………. 12
  • Weight Lbs……………………….. 19
  • Max Temp………………. 140°
  • Oil Capacity……………………… 15oz
  • Inlet Thread …………… 1/2”F
  • Discharge Thread………………. 3/8”F

List Price: $854.02
Our Price: $532.74 
You save $321.28!

Availability:: available for order
Product Code: RKA4G40HN
Annovi Reverberi Pressure Washer Pump
PSI: 4000
GPM: 4

Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer.
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

Posted on

COMET Pressure Washer Pump FW 5530 S – 6400.1400.00

COMET Pressure Washer Pump  FW 5530 S – 6400.1400.00, 5.3 GPM @ 3000 PSI @ 1450 RPM, See product spec sheet for detailed specifications, repair kits and replacement parts. Click here.

The COMET Pressure Washer Pump FW 5530 S – 6400.1400.00 Features:

  • 1/2 FPT Inlet, 3/8 FPT Discharge
  • Anodized, Die-Cast Aluminum Crankcase
  • Solid Ceramic Plungers
  • Stainless Steel Check Valves & Piston Guides
  • Oversized Bronze Connecting Rods
  • Buna-Textile V-Packings
  • Reversible Crankcase for Right or Left Hand Mounting
  • 24mm Solid, Keyed Shaft
COMET Pressure Washer Pump FW 5530 S - 6400.1400.00
COMET Pressure Washer Pump FW 5530 S - 6400.1400.00

The COMET Pressure Washer Pump FW 5530 S – 6400.1400.00 has the following specifications:

  • Maximum Volume 5.5 gpm
  • Max. Discharge Pressure 3000 psi
  • Maximum Pump Speed 1450 rpm
  • Inlet Port Thread 1/2 FPT
  • Discharge Port Thread 3/8 FPT
  • Shaft Diameter 24mm Solid
  • Piston 20mm
  • Weight 19.4 lbs.
List Price: $1,085.00
Our Price: $542.34 
You save $542.66!
Availability:: available for order
Product Code: 6400.1400.00
Comet Pressure Washer Pump \
Posted on

COMET Pressure Washer Pump FW 4030 S – 6400.1106.00

COMET Pressure Washer Pump FW 4030 S – 6400.1106.00, 4.0 GPM @ 3000 PSI @ 1450 RPM, See product spec sheet for detailed specifications, repair kits and replacement parts.

COMET Pressure Washer Pump FW 4030 S - 6400.1106.00
COMET Pressure Washer Pump FW 4030 S - 6400.1106.00

The COMET Pressure Washer Pump FW 4030 S – 6400.1106.00 Features:

  • 1/2 FPT Inlet, 3/8 FPT Discharge
  • Anodized, Die-Cast Aluminum Crankcase
  • Solid Ceramic Plungers
  • Stainless Steel Check Valves & Piston Guides
  • Oversized Bronze Connecting Rods
  • Buna-Textile V-Packings
  • Reversible Crankcase for Right or Left Hand Mounting
  • 24mm Solid, Keyed Shaft

This COMET Pressure Washer Pump FW 4030 S – 6400.1106.00 has the following technical specifications:

  • Maximum Volume 4.0 gpm
  • Max. Discharge Pressure 3000 psi
  • Maximum Pump Speed 1450 rpm
  • Inlet Port Thread 1/2 FPT
  • Discharge Port Thread 3/8 FPT
  • Shaft Diameter 24mm Solid
  • Piston 18mm
  • Weight 19.4 lbs.
List Price: $1,025.00
Our Price: $512.79 
You save $512.21!
Availability:: Usually Ships in 24 Hours
Product Code: 6400.1106.00
Posted on

CAT Pressure Washer Pump 530

CAT Pressure Washer Pump 530 7PFR Ceramic Plunger, 5.0/2500, 1100 RPM, D-End, BBCP/S-Valves.

Need parts for this CAT Pressure Washer Pump 530?

Click here for the datasheet for CAT Pressure Washer Pump 530.

Click here for servicing instructions for this CAT Pressure Washer Pump 530.

CAT Pressure Washer Pump 530
CAT Pressure Washer Pump 530

The CAT Pressure Washer Pump 530 Features:

  • Triplex plunger provides smoother liquid flow.
  • Hi-Pressure Seals or V-Packings are completely lubricated and cooled by the liquid being pumped.
  • Inlet and discharge valve assemblies interchange for easier maintenance.
  • Lubricated Lo-Pressure Seals provide double protection against external leakage.
  • Oil bath crankcase assures optimum lubrication.
  • Close tolerance concentricity of the ceramic plunger maximizes seal life.
  • Precision design 304 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life.
  • Forged brass manifold is strong and corrosion resistant.
  • Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
  • Specially formulated, CAT PUMP exclusive, Hi-Pressure Seals or
  • V-Packings offer unmatched performance and seal life.
  • Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
  • Chrome-moly crankshaft gives unmatched strength and surface hardness.
  • Oversized crankshaft bearings with greater capacity mean longer bearing life.
  • Wet end is easily serviced without entering crankcase, requiring less time and effort.
  • Valve assemblies are accessible without disturbing piping, for quick service.
  • Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs.

This CAT Pressure Washer Pump 530 has the following technical specifications:

  • Flow…………………………………………………..5.0 GPM (19 L/M)
  • Pressure Range………………………..100 to 2500 PSI (7 to 175 BAR)
  • RPM ……………………………………………….1100 RPM (1100 RPM)
  • Bore……………………………………………………..0.708″ (18 mm)
  • Stroke…………………………………………………..0.945″ (24 mm)
  • Inlet Pressure Range………………Flooded to 60 PSI (Flooded to 4 BAR)
  • Crankcase Capacity ………………………………..25 oz. (0.75 L)
  • Maximum Liquid Temperature …………………..160°F (71°C)
  • For temperatures above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (2) ……………………………………1/2″ NPTF (1/2″ NPTF)
  • Discharge Ports (2)……………………………3/8″ NPTF (3/8″ NPTF)
  • Shaft Diameter ……………………………………….0.945″ (24 mm)
  • Weight………………………………………………..25.5 lbs. (11.5 kg)
  • Dimensions…………………………..13.6 x 9.61 x 6.41″ (346 x 244 x 163 mm)

List Price: $1,853.02
Our Price: $1,425.90 
You save $427.12!
Availability:: Usually Ships in 24 Hours
Product Code: BAPL-2616

Posted on

Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25

Annovi Reverberi Pressure Washer Pump  XMV2.5G26D-F25 2.5 GPM @ 2600 PSI
Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.

Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25
Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25

Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25 Features:

  • Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
  • Inlet and Discharge Ports: Heavy bosses for added strength.
  • Offset Discharge Ports: High efficiency, smooth flow.
  • Bolts: Eight bolts, 6mm, grade 12.9.
  • Ultra Form Cages: Durability, strength and long life.
  • Poppets, Seat and Spring: 303 and 400 series stainless steel.
  • Valve Caps: Machined brass – greater strength.
  • Packing and Plungers:
  • High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
  • Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
  • Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
  • Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
  • Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
  • Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
  • Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
  • Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
  • Connecting Rods: One-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
  • Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
  • Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
  • Oil Capacity: 14.5 oz., refer to parts breakdown.
  • Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
  • Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
  • Hot Water: High temperature kits are available to 180º F. Refer to breakdown
  • Wet End Repair: Very simple no special tools are required.
  • Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
  • Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25 has the following specifications:

  • Max GPM………………2.5
  • Max LMP…………………………9.5
  • Max PSI………………….2600
  • Max Bar………………………….179
  • Power EBHP……………5
  • Bore Dia. mm…………………….15
  • Stroke mm……………….6.2
  • Weight Lbs………………………..15
  • Max Temp……………….140°
  • Oil Capacity………………………14.6oz
  • Inlet Thread ……………1/2”F
  • Discharge Thread……………….3/8”F
Items NOT INCLUDED with your Annovi Reverberi Pressure Washer Pump XMV2.5G26D-F25that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.

The INLET WATER FILTER will catch most small debris before it enters your pump

The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer

The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!

PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

List Price: $588.80
Our Price: $369.47 
You save $219.33!

Availability:: Usually Ships in 24 Hours
Product Code: XMV2.5G26D-F25

 

Posted on

COMET Pressure Washer Pump AXS 0415 E – 6502.0009.00

COMET Pressure Washer Pump AXS 0415 E  – 6502.0009.00,  HOLLOW SHAFT, LOW FLOW, MISTING

COMET Pressure Washer Pump AXS 0415 E - 6502.0009.00
COMET Pressure Washer Pump AXS 0415 E - 6502.0009.00

The COMET Pressure Washer Pump AXS 0415 E  – 6502.0009.00 Features:

  • 0.4 GPM
  • 1500 PSI
  • 1750 RPM
  • 5/8″ HOLLOW SHAFT
  • CERAMIC PLUNGERS
  • FORGED BRASS MANIFOLD
  • BUILT-IN GARDEN HOSE ADAPTER
  • STAINLESS STEEL CHECK VALVES
  • 3/4″ FGH INLET – 3/8″ MPT OUTLET
  • PATENT REGISTERED BALL BEARING DESIGN
  • MISTING AND HIGH PRESSURE APPLICATIONS
  • INDUSTRIAL DUTY CONSTRUCTION FOR EXTENDED LIFE
  • BUILT-IN UNIFLOW UNLOADER AND CHEMICAL INJECTOR

The COMET Pressure Washer Pump AXS 0415 E  – 6502.0009.00 technical specializations are :

  • Maximum Volume 1.4 gpm
  • Max. Discharge Pressure 1500 psi
  • Maximum Pump Speed 1750 rpm
  • Inlet Port Thread 3/4 FGH
  • Discharge Port Thread 3/8 MPT
  • Shaft Diameter 5/8 Hollow
  • Weight 12.0 lbs.

List Price: $555.00
Our Price: $281.33 
You save $273.67!
Product Code: 6502.0009.00
Comet Pressure Washer Pump

Posted on

CAT Pressure Washer Pump 56

This is a CAT Pressure Washer Pump 56 triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a forged brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings.

7PFR Ceramic Plunger, 5.5/3500, 1210 RPM or 6.0/3000, 1320 RPM, S-End, FBB/S-Valves.

Need parts for this pump?
Click here for the datasheet.
Click here for servicing instructions.

CAT Pressure Washer Pump 56
CAT Pressure Washer Pump 56

The CAT Pressure Washer Pump 56 Features:

  • Superior Design!
  • Triplex plunger design gives smoother liquid flow.
  • V-Packings are completely lubricated and cooled by the liquid being pumped.
  • Inlet and discharge valve assemblies interchange for easier maintenance.
  • Lubricated Lo-Pressure Seals provide double protection against external leakage.
  • Oil bath crankcase assures optimum lubrication.
  • Close tolerance concentricity of the ceramic plunger maximizes seal life.
  • Convenient Gearbox Pump version for direct mounting to gas engine.
  • Quality Materials!
  • All stainless steel valves are heat treated and seats are roller burnished for a positive seal and extended valve life.
  • Forged brass manifold is strong and corrosion resistant.
  • Special concentric, high density, polished, graphite impregnated, solid ceramic plungers are abrasion resistant and result in extended seal life.
  • Specially formulated, CAT PUMP exclusive, V-Packings offers unmatched performance and seal life.
  • Optional FPM [Viton®] elastomers for liquid compatibility.
  • Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
  • Chrome-moly crankshaft gives unmatched strength and surface hardness.
  • Oversized crankshaft bearings with greater loading capacity mean longer bearing life.
  • Easy Maintenance!
  • Wet-end is easily serviced without entering crankcase, requiring less time and effort.
  • Valve assemblies are accessible without disturbing piping, for quick service.
  • Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs.

The CAT Pressure Washer Pump 56 has the following technical specifications:

  • COMMON SPECIFICATIONS
  • Bore: 0.708″ (18 mm)
  • Inlet Pressure Range: Flooded to 60 PSI (Flooded to 4 BAR)
  • Crankcase Capacity: 25 oz. (0.75 L)
  • Maximum Liquid Temperature: 160°F (71°C)
  • (Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.)
  • Inlet Ports (2): 1/2″ NPTF (1/2″ NPTF)
  • Discharge Ports (2): 3/8″ NPTF (3/8″ NPTF)
  • Shaft Diameter: 0.945″ (24 mm)
  • Weight: 29.25 lbs. (13.3 kg)
  • Weight w/Gearbox: 36.8 lbs. (16.7 kg)
  • Dimensions: 13.93 x 8.2 x 6.41″ (354 x 208 x 163 mm)
  • *See Data Sheet 8051-8078 for maximum engine RPM.
  • MODELS 56 Alternate or 56G1*
  • Flow …………………………. 5.5 gpm (21 l/m) 8 gpm (30 l/m)
  • Pressure Range……….. 100 to 3500 psi (7 to 245 bar) 100 to 1800 psi (7 to 125 bar)
  • Pump RPM………………. 1210 rpm (1210 rpm) 1760 rpm (1760 rpm)
  • Engine RPM…………….. — — 3600 rpm (3600 rpm)
  • Stroke……………………….. 0.945” (24 mm) 0.945” (24 mm)
List Price: $2,259.54
Our Price: $1,738.72 
You save $520.82!
Availability:: Usually Ships in 24 Hours
Product Code: BAPL-1935
CAT Pressure Washer Pump