Tag: pumps

Posted on

Annovi Reverberi XT 1750 rpm N Version Pumps

AR – Annovi Reverberi XT 1750 rpm N Version 24mm Solid Shaft

Max Max Power Bore Stroke Weight
Model GPM PSI EBHP Dia mm mm Lbs.
XTA2G15 2.11 2000 3 15 9.6 10
XTA2G22 2.11 2200 3 15 9.6 11
XTA3G16 3 1600 3 18 9.6 10
XTA3G19 3 1900 4 18 9.6 11
XTA3G22 3 2200 4.5 18 9.6 11

XT 1750 Pump Break Down Click Here.

For all Annovi Reverberi Pump Breakdowns click here.

To Order Annovi Reverberi XT 1750 N Version Pumps Click here.

Posted on

Direct Drive Pressure Washer Pump Removal

Direct Drive Pressure Washer Pump Removal
The following steps will assist you in removing your pump from your gas
engine or electric motor on your pressure washer.
1. To start the process, spray a few drops of penetrating oil onto the top groove
or two small rectangular slots on the sides of the pump flange.
2. Remove the mounting bolts and washers securing the pump to the drive.
3. Loosen set screw.
4. Insert a flat head screwdriver into the two opposing slots on the mounting
flange and pry pump from gas engine or electric motor. Apply only reasonable
pressure. Do not force separation.
5. If pump resists the separation, insert two full threaded screws into the two
special holes in the pump mounting flange. Thread in deep enough to make
contact with the gas adapter plate or electric motor face. Then continue to thread
in the bolts in an alternating pattern to separate the pump from the drive. Apply
only reasonable torque. Do not force separation.
6. A strong bond may develop in any direct drive installation and may increase
with heavy duty operation and time. It may be necessary to repeat one or more of
these steps.
NOTE:
To ease the stress of future repairs, make a habit of removing the pump and
applying anti-seize lubricant on a semiannual basis. With the heat that is
generated in the crankshaft area, anti-seize won’t last forever.

With the pump removed, apply a moderate layer of anti-seize lubricant to the
pump’s crankshaft and a small bead of high-heat caulk around the middle of the
motor or engine’s crankshaft to seal out any moisture to the coupling.
To purchase Anti-Seize Lubricant, see:
http://www.etscompany.com/cleaning_products/product_info.php/products_id/55057/
IS YOUR DIRECT DRIVE PRESSURE WASHER PUMP STUCK?
The procedure: Loosen the four flange bolts equally so that two threads are
exposed. Start the motor and the centrifugal force of the spinning motor should
cause the pump to move outward toward the bolt heads. You may have to help
the pump by pulling on it while the motor is running. Once the pump has moved
to the bolt heads, stop the motor and loosen the bolts so that another two threads
are exposed.
Once the pump has moved, say 3/8”, remove the flange bolts completely and
start to pull the pump off the crankshaft. You may still have to pry the pump off,
but it will be much easier. And the best part is, no broken parts to clean up!

ETS Co. Inc. http://www.etscompany.com/

Pdf can be found here: http://www.etscompany.com/Direct_Drive_Pump_Removal.pdf

Posted on

AR – Annovi Reverberi XT 1450 rpm N Version 24mm Solid Shaft

AR – Annovi Annovi Reverberi XT 1450 rpm N Version 24mm Solid Shaft

Max Max Power Bore Stroke Weight
Model GPM PSI EBHP Dia mm mm Lbs.
XT8.14 2.11 2000 3 15 11 11
XT9.14 2.37 2000 3.3 18 8.4 11
XT11.14 2.9 2000 4 18 11 11

XT 1450 Pump Break Down Click Here.

XT8.14 Annovi Reverberi pump

Features

  • GPM 2.11
  • PSI 2000
  • EBHP 3
  • Shaft Diameter 24mm
  • Oil Capacity 10 OZ
  • INLET 1/2″ F
  • OUTLET 3/8″ F

XT9.14 Annovi Reverberi pump

Features

  • 2.37 G.P.M.
  • 2000 PSI
  • 3.3 Power EBHP
  • 18MM Bore Diam.
  • 8.4MM Stroke
  • 1450 RPM
  • 24MM Solid Shaft
  • High strength forged brass manifold
  • 6 – 6MM bolts
  • Ceramic plungers w/ thicker wall to help prevent thermal shock
  • Stainless Steel Valves

XT11.14 Annovi Reverberii pump

Features

  • 2.9 G.P.M.
  • 2000 PSI
  • 4.0 Power EBHP
  • 18MM Bore Diam.
  • 11MM Stroke
  • 1450 RPM
  • 24MM Solid Shaft
  • High strength forged brass manifold
  • 6 – 6MM bolts
  • Ceramic plungers w/ thicker wall to help prevent thermal shock
  • Stainless Steel Valves

CLICK HERE to purchase any of the AR – Annovi Reverberi XT 1450 rpm N Version 24mm Solid Shaft

 

Posted on

Pressure Washer Pumps and Accessories

Before you buy a New Pressure Washer from Home Depot or Lowe’s. Check out about Replacing your pump!

Shopetsonline has 1000’s of pumps for all types of pressure washer:

ANNOVI REVERBERI CAT PUMPS
COMET PUMPS GENERAL PUMP
GIANT PUMP HYPRO
MI-T-M BOLT-N-GO PUMP SPECIALS
UNICO PUMPS

So if that pressure washer you purchased from Lowes or Home Depot stops working, Check us out first to see if our staff can help you get it back in working order with out having to purchase a whole new unit for the big box stores like lowe’s or home depot.

Pressure Washer Pumps and Accessories

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Posted on

Spotlight on CAT Pump 45G118

5 Frame

Plunger Pump

Standard Model 45

Gearbox Model 45G1

CLICK HERE FOR Pump Break Down of CAT Pump 45G118

FEATURES

Superior Design

Triplex plunger design gives smoother liquid flow.

V-Packings are completely lubricated and cooled by the liquid being

pumped.

Lubricated Lo-Pressure Seals provide double protection against

external leakage.

Oil bath crankcase assures optimum lubrication.

Close tolerance concentricity of the ceramic plunger maximizes

seal life.

Optional Gearbox Pump version for direct mounting to gas engine.

Quality Materials

Precision design 304 stainless steel valves and seats are hardened

and polished for ultimate seating and extended valve life.

Forged brass manifold for strength and corrosion resistance.

Special concentric, high-density, polished, solid ceramic plungers

provide a true wear surface and extended seal life.

Specially formulated, CAT PUMP exclusive, V-Packings offer

unmatched performance and seal life.

Die cast aluminum crankcase provides high strength, minimum

weight and precision tolerance control.

Chrome-moly crankshaft gives unmatched strength and surface

hardness.

Oversized crankshaft bearings with greater loading capacity means

longer bearing life.

Easy Maintenance

Wet-end easily serviced without entering crankcase.

Valve assemblies are accessible without disturbing piping.

Interchangeable inlet and discharge valve assemblies.

Preset seals require no packing adjustment.

FOR SERVICE MANUAL FOR CAT PUMP 45G118 CLICK HERE.

List Price: $2,175.00

Our Price: $1,673.66

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Posted on

CAT Pump 650 (plunger pump)

CAT 650 PLUNGER PUMP

CAT Pump 650 (plunger pump)

Features

  • Superior Design
  • Triplex plunger design provides smoother liquid flow.
  • V-Packings are completely lubricated and cooled by the liquid being
  • pumped.
  • Lubricated Lo-Pressure Seals provide double protection against
  • external leakage.
  • Oil bath crankcase assures optimum lubrication.
  • Close tolerance concentricity of the ceramic plunger offers perfect
  • alignment and maximizes seal life.
  • Quality Materials
  • All stainless steel valves are heat treated and seats are roller
  • burnished for a positive seal and extended valve life.
  • Bronze or Duplex Stainless Steel manifolds are strong and corrosion
  • resistance.
  • Special concentric, high-density, polished, solid ceramic plungers
  • provide atrue wear surface and extended seal life.
  • Specially formulated, CAT PUMP exclusive, V-Packings offer
  • unmatched performance and seal life.
  • Die cast aluminum crankcase provides high strength, minimum
  • weight and precision tolerance control.
  • Chrome-moly crankshaft gives unmatched strength and surface
  • hardness.
  • Oversized crankshaft bearings with greater loading capacity mean
  • longer bearing life.
  • Easy Maintenance
  • Wet-end is easily serviced without entering crankcase, requiring less
  • time and effort.
  • Inlet and discharge valve assemblies interchange for easier
  • maintenance without disturbing piping.
  • Preset packings mean no packing gland adjustment is necessary,
  • reducing maintenance costs.
  • SECIFICATIONS
  • Flow……………………………………………7.0 GPM (27 L/M)
  • Pressure Range…………………100 to 3000 PSI (7 to 210 BAR)
  • RPM ………………………………………..1000 RPM (1000 RPM)
  • Inlet Pressure Range……………..–5 to +60 PSI (–0.35 to +4 BAR)
  • Bore……………………………………………….. .787″ (20 mm)
  • Stroke…………………………………………….1.181″ (30 mm)
  • Crankcase Capacity …………………………42 oz. (1.26 L)
  • Maximum Liquid Temperature……………160°F (71°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (2) …………………………….3/4″ NPTF (3/4″ NPTF)
  • Discharge Ports (2)…………………….1/2″ NPTF (1/2″ NPTF)
  • Pulley Mounting ………………………..Either Side (Either Side)
  • Shaft Diameter ………………………………. 1.181″ (30 mm)
  • Weight……………………………………………44 lbs. (19.9 kg)
  • Dimensions…………………..16.28×12.99×6.44″ (413.50x330x163.50 mm)

CAT Pump 650 Plunger Pump Breakdown Click Here

CAT Pump 650 Plunger Pump Service manual Click Here

 

List Price: $3,395.34

Our Price: $2,612.71

Purchase the CAT 650 PLUNGER PUMP here

Posted on

Spotlight on AR PUMP RKV4G37D-F24 (annovi reverberi)

AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pump 4 GPM @ 3700 PSI

ETS BOLT-N-GO  RKV4G37D-F24 PUMP PACKAGE SPECIAL!

EACH RKV4G37D-F24 PUMP PACKAGE COMES INDIVIDUALLY PACKAGED, BRAND NEW – FACTORY TESTED! THIS PACKAGE CONSISTS OF ONE RKV4G37 3400 RPM D VERSION 1” (WITH GAS ENGINE FLANGE) PUMP WITH BOLT-ON STYLE UNLOADER (EITHER MINI-MATIC, GYMATIC OR VR35), THERMAL RELIEF VALVE (AKA PUMP GUARD), GARDEN HOSE THREAD & FILTER AND 3/8 IN. PLUG OUTLET.

AND DON’T FORGET FREE SHIPPING! (WITHIN CONTINENTAL UNITED STATES)

JUST REMOVE YOUR OLD 1 IN. GAS ENGINE FLANGE PUMP AND BOLT THIS ONE ON!
For parts just enter any part number on this breakdown in our search box for pricing and availability.

PARTS LIST: RKV 3400 rpm

AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Plunger Pumps are designed for a wide variety of high pressure washing applications. The AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pump is constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.

The AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pump Features:

  • Manifold:
  • – Forged Brass: Strength and no porosity – long life. higher hydrostatic pressures – safety, performance.
  • – Inlet and Discharge Ports: Heavy bosses for added strength.
  • – Offset Discharge Ports: High efficiency, smooth flow.
  • – Bolts: Eight bolts, 8mm, grade 8.8.
  • Valves:
  • – Valve Caps: Stainless steel on pumps rated at 3200 PSI and higher, better hydrostatic loads. Machined brass on pumps <3200 PSI.
  • – Ultra Form Cages: Durable, strength, and long life.
  • – Poppets, Seat and Spring: 303 and 400 series stainless steel.
  • Packing and Plungers:
  • – High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • – Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
  • – Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life.
  • – Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
  • Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
  • Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
  • Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
  • Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
  • Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
  • Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
  • Connecting Rods: One-piece special allow aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
  • Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
  • Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
  • Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
  • Oil Capacity: 15.5 oz.
  • Dyno Proven: All RKV4G37D-F24 pumps are dyno tested to assure the theoretical design meets the actual design.
  • Valve Design: Each RKV4G37D-F24 pump series has a valve design that optimizes its highest efficiency.
RKV4G37D-F24 Pressure Washer Pump
RKV4G37D-F24 Pressure Washer Pump

The AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pump has the following specifications:

  • Maximum volume: 4 GPM
  • Maximum discharge pressure: 3700 PSI
  • Horsepower: 9.75 GHP
  • Maximum pump speed: 3400 RPM
  • Hollow shaft I.D: 1″
  • Bore: 18mm
  • Stroke: 7.0 mm
  • Inlet port thread: 1/2″ FPT
  • Discharge port thread: 3/8″ FPT
  • Maximum fluid temperature: 140 F.
  • Crankcase oil capacity: 15 oz
  • Crankshaft ID stamp: 8
  • Weight: 21 lbs.
RKV4G37D-F24 Pressure Washer Pump
RKV4G37D-F24 Pressure Washer Pump

List Price: $1,047.54
Our Price: $474.06 
You save $573.48!

Availability:: available for order
Product Code: ARWP-RTR-RKV4G37D
Annovi Reverberi Pressure Washer Pump
PRICE SUBJECT TO CHANGE.  PRICE ON THIS rkv4g37d-f24 VALID 11/16/2011

 

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
Posted on

Spotlight on General Pressure Washer Pumps

Residential Pressure Cleaning Pumps

 General Pump models include CPH2525UI, CPH2530UI, TH3020G, TH2016G, TH2020G, TH2516G, TH2520G, TH3016G, TH3516G, TH3520G, TV2016G, TV2020G, TV2516G, TV2520G, TV3016G, TV3020G, TV3516G, TV3520G

T Series 49

 General Pump models include T721B, T731B, T9711EBF, T9721B, T9721EBF, T9731B, T9731EBF

TT Series 51

 General Pump model sinclude TT1505EBF, TT2021EBF, T9051EBF, TT9061EBF, TT2028EBF, TT9071EBF, TT9111EBF, TT2035EBF, T9051EBFU, TT9061EBFU, TT9071EBFU, TT9061EBFUI, T9051EBFUI, TT9071EBFUI, TT2035EBFUI, TT9061GBF, TT2028GBF, TT9071GBF, TT2035GBF, TT1540GBF, TT901, TT951, TT931, TT9111, TT941

TP Series 51

 General Pump models include TP2021C17, TP2024C17, TP2032C17, TP2520J34, TP2526J34, TP2530J34, TP2533J34, TP2520J34UIL, TP2526J34UIL, TP2530J34UIL, TP2533J34UILThe General TP Series 51 Triplex plunger pumps feature hollow shafts and are flanged for direct couple to gasoline engines with performance ranginf from 1.9 to 3.3 gpm at 2500 psi.

TX Series 63

 GeneralPump models include TX1505G6, TX1506G6, TX1506G6UIL, TX1506G6UKL, TX1506G8, TX1508G6, TX1508G8UIL, TX1508G8UKL, TX1508G8, TX1506S34, TX1508S34, TX1509G8, TX1509G8UIL, TX1509G8UKL, TX1510G8UIL, TX1509G8UKL, TX1510E179, TX1510E349, TX1510G8, TX1510S34, TX1512E179, TX1512S17, TX1518G8, TX1810E179, TX1810S17, TX1812E179, TX1812S17The General TX 63 Series feature reliable pumps ready for direct coupling with Gas Engines and electric motors. Peformanceranged from 2000 to 3000 psi and 2.1 up to 4.0 gpm.

EZ Series 44

 GeneralPump models include EZ2530SUI, EZ2536E, EZ2536EUI, EZ2536S, EZ2542E, EZ2542S, EZ2545E, EZ2545GUI, EZ2545S, EZ2555E, EZ2555S, EZ3030G34, EZ3030G34UI, EZ3035G, EZ3035GUIThe General EZ Series General Pumps feature forged brass manifold Triples plunger pumps with solid plungers ranging in performance from 2500 to 4000 PSI and GPM from 3.0 to 5.5.

T Series 50

 GeneralPump models include T911, T9351, T9441, T991, T9951, T9971, TT9351The General T Series 50 General Pumps feature the original InterPump inlet and outlet valves. They are ideal for all general cleaning/washing applications and can be used in direct drive applications. Performance ranges from 4 gpm at 1100 psi up to 2500 psi at 4.4 gpm.

T Series 47

 GeneralPump models include 190407, T1011GR, T1011, T1321, T1621-N, T5050, T9211-N-GR, T9211, T9211-N, T921, T9281-N-GR, T9281-N, T9281, TS1011GR, TS1011, TS1021GR, TS1021, TS1321GR, TS1321, TS1331GR, TS1331, TS1511GR, TS1511, TS1621-N-GR, TS1621-N, TS1621, TS1711GR, TS1711, TS1811, TS2011-N-GR, TS2011-N, TS2011, TS2012SS, TS2016SS, TS2021-N-GR, TS2021-N, TS2021, TS2212SS, TS921GR, TS921 The General T Series 47 Triplex plunger pumps are the preferred pump in the Pressure Cleaning Industry. They feature forged brass manifolds with lifetime warranty’s as well as stainless steel manifolds while performance ranges from 4 gpm up to 5.6 gpm and pressures from 1500 psi to 3500 psi.
Posted on

Spotlight on Consumer Giant Pumps

CONSUMER
Giant PUMPS

Click the following giant pump
models to view the pump manual in PDF format. If you don’t have Adobe Acrobat
Reader to view PDF documents, click the following icon to download one.
GXR Vertical or Horizontal
Pumps with Regulator includes Siphon Injector, Thermal Relief Valve and
Engine Mounting Accessories
Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End
Giant GXR
2424		 2.4 2400 3450 5.2 Brass
Giant GXR
2224		 2.2 2400 3450 5.0 Brass

Weight: 9 lbs.
Bore
Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature:
80 degree F
Inlet Port: 1/2″ NPT

Discharge Port: 3/8″
NPT

Giant GX Vertical or Horizontal
Pumps with Unloader includes Siphon Injector, Thermal Relief Valve and
Engine Mounting Accessories		 GX2525
Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End
2.0
2500
3450
3.4
Brass
2.3
2500
3450
3.9
Brass
Giant GX
2525		 2.5 2500 3450 4.3 Brass

Weight: 9 lbs.
Bore
Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature:
80 degree F

Inlet Port: 1/2″ NPT

Discharge Port: 3/8″
NPT

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Posted on

Spotlight on Comet Pumps

Comet Pumps were introduced into the US market back in 1995 and soon Became the Best Built Pressure Washer Pumps available in most applications. The Comet Pumps are great as a replacement of the original Horizontal pumps found on many pressure Washers using Honda, Briggs & Stratton and other engines that were sold thru catalogs and big box stores like Home Depot and Lowe’s across the country. Comet Pumps have proven to be as reliable as Honda Engines and will usually out last them. Comet Pumps have also proven to be so good that no Lowe’s or Home Depot store brand will use them because they never fail and the manufacturers need to keep selling you there products. The Comet AXD series of Pumps have become the Best Choice as a replacement pump for Brands such as Generac, Coleman Powermate, Excell, Devilbiss, Troy-Bilt, Sears, Craftsman, Honda, Briggs & Stratton and many others. The Comet AXD Pumps have all the features that you would want in a pressure washer pump that will make them Durable, Functional & Reliable.

Click links below for following resources:

Comet Pump Main Catalog

Comet Pump Breakdowns

Comet Pump Repair Manual

Equipment Trade Service Co. Inc. has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.