| General Pump models include CPH2525UI, CPH2530UI, TH3020G, TH2016G, TH2020G, TH2516G, TH2520G, TH3016G, TH3516G, TH3520G, TV2016G, TV2020G, TV2516G, TV2520G, TV3016G, TV3020G, TV3516G, TV3520G | |
| General Pump models include T721B, T731B, T9711EBF, T9721B, T9721EBF, T9731B, T9731EBF | |
| General Pump model sinclude TT1505EBF, TT2021EBF, T9051EBF, TT9061EBF, TT2028EBF, TT9071EBF, TT9111EBF, TT2035EBF, T9051EBFU, TT9061EBFU, TT9071EBFU, TT9061EBFUI, T9051EBFUI, TT9071EBFUI, TT2035EBFUI, TT9061GBF, TT2028GBF, TT9071GBF, TT2035GBF, TT1540GBF, TT901, TT951, TT931, TT9111, TT941 | |
| General Pump models include TP2021C17, TP2024C17, TP2032C17, TP2520J34, TP2526J34, TP2530J34, TP2533J34, TP2520J34UIL, TP2526J34UIL, TP2530J34UIL, TP2533J34UILThe General TP Series 51 Triplex plunger pumps feature hollow shafts and are flanged for direct couple to gasoline engines with performance ranginf from 1.9 to 3.3 gpm at 2500 psi. | |
| GeneralPump models include TX1505G6, TX1506G6, TX1506G6UIL, TX1506G6UKL, TX1506G8, TX1508G6, TX1508G8UIL, TX1508G8UKL, TX1508G8, TX1506S34, TX1508S34, TX1509G8, TX1509G8UIL, TX1509G8UKL, TX1510G8UIL, TX1509G8UKL, TX1510E179, TX1510E349, TX1510G8, TX1510S34, TX1512E179, TX1512S17, TX1518G8, TX1810E179, TX1810S17, TX1812E179, TX1812S17The General TX 63 Series feature reliable pumps ready for direct coupling with Gas Engines and electric motors. Peformanceranged from 2000 to 3000 psi and 2.1 up to 4.0 gpm. | |
| GeneralPump models include EZ2530SUI, EZ2536E, EZ2536EUI, EZ2536S, EZ2542E, EZ2542S, EZ2545E, EZ2545GUI, EZ2545S, EZ2555E, EZ2555S, EZ3030G34, EZ3030G34UI, EZ3035G, EZ3035GUIThe General EZ Series General Pumps feature forged brass manifold Triples plunger pumps with solid plungers ranging in performance from 2500 to 4000 PSI and GPM from 3.0 to 5.5. | |
| GeneralPump models include T911, T9351, T9441, T991, T9951, T9971, TT9351The General T Series 50 General Pumps feature the original InterPump inlet and outlet valves. They are ideal for all general cleaning/washing applications and can be used in direct drive applications. Performance ranges from 4 gpm at 1100 psi up to 2500 psi at 4.4 gpm. | |
| GeneralPump models include 190407, T1011GR, T1011, T1321, T1621-N, T5050, T9211-N-GR, T9211, T9211-N, T921, T9281-N-GR, T9281-N, T9281, TS1011GR, TS1011, TS1021GR, TS1021, TS1321GR, TS1321, TS1331GR, TS1331, TS1511GR, TS1511, TS1621-N-GR, TS1621-N, TS1621, TS1711GR, TS1711, TS1811, TS2011-N-GR, TS2011-N, TS2011, TS2012SS, TS2016SS, TS2021-N-GR, TS2021-N, TS2021, TS2212SS, TS921GR, TS921 The General T Series 47 Triplex plunger pumps are the preferred pump in the Pressure Cleaning Industry. They feature forged brass manifolds with lifetime warranty’s as well as stainless steel manifolds while performance ranges from 4 gpm up to 5.6 gpm and pressures from 1500 psi to 3500 psi. | |
Spotlight on Consumer Giant Pumps
CONSUMER
Giant PUMPS
Giant PUMPS
 |
Click the following giant pump models to view the pump manual in PDF format. If you don’t have Adobe Acrobat Reader to view PDF documents, click the following icon to download one.  |
| GXR Vertical or Horizontal Pumps with Regulator includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories |
| Pump Model | Max. GPM | Max. PSI | Max. RPM | Req’d BHP | Fluid End |
| Giant GXR 2424 |
2.4 | 2400 | 3450 | 5.2 | Brass |
| Giant GXR 2224 |
2.2 | 2400 | 3450 | 5.0 | Brass |
Weight: 9 lbs.
Bore
Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature:
80 degree F
Inlet Port: 1/2″ NPT
Discharge Port: 3/8″
NPT
| Giant GX Vertical or Horizontal Pumps with Unloader includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories |
 |
| Pump Model | Max. GPM | Max. PSI | Max. RPM | Req’d BHP | Fluid End |
|
2.0
|
2500
|
3450
|
3.4
|
Brass
|
|
|
2.3
|
2500
|
3450
|
3.9
|
Brass
|
|
| Giant GX 2525 |
2.5 | 2500 | 3450 | 4.3 | Brass |
Weight: 9 lbs.
Bore
Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature:
80 degree F
Inlet Port: 1/2″ NPT
Discharge Port: 3/8″
NPT
Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
Spotlight on Comet Pumps
Comet Pumps were introduced into the US market back in 1995 and soon Became the Best Built Pressure Washer Pumps available in most applications. The Comet Pumps are great as a replacement of the original Horizontal pumps found on many pressure Washers using Honda, Briggs & Stratton and other engines that were sold thru catalogs and big box stores like Home Depot and Lowe’s across the country. Comet Pumps have proven to be as reliable as Honda Engines and will usually out last them. Comet Pumps have also proven to be so good that no Lowe’s or Home Depot store brand will use them because they never fail and the manufacturers need to keep selling you there products. The Comet AXD series of Pumps have become the Best Choice as a replacement pump for Brands such as Generac, Coleman Powermate, Excell, Devilbiss, Troy-Bilt, Sears, Craftsman, Honda, Briggs & Stratton and many others. The Comet AXD Pumps have all the features that you would want in a pressure washer pump that will make them Durable, Functional & Reliable.
Click links below for following resources:
Equipment Trade Service Co. Inc. has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
CAT Pump – 10 Frame Piston Pump – model 623.011
CAT Pump – 10 Frame Piston Pump – model 623.011
Features
- 6.0GPM,1200PSI
- Triplex Uniflow design provides continuous forward liquid flow for
- smooth operation.
- Wetted cups and floating pistons are lubricated and cooled by
- pumped liquid for long cup life.
- Mechanically actuated inlet valves give strong lift and easy prime.
- Oil bath crankcase assures optimum lubrication.
- 100% wetted seal design allows pumped liquid to cool and lubricate
- for longer life.
- Cylinder and sleeve wear surfaces are hard chrome plated 304
- stainless steel for maximum durability and abrasion resistance.
- Chrome plated, brass manifolds and optional stainless steel
- manifolds are strong and corrosion resistant.
- Special high strength TNM connecting rods offer superior bearing
- quality strength.
- Chrome-moly crankshaft gives unmatched strength and surface
- hardness.
- Oversized crankshaft bearings with greater loading capacity mean
- longer bearing life
CAT Pump 623 data sheet CLICK HERE
CAT Pump 623 Service Manual CLICK HERE
CLICK HERE to Order CAT Pump 623
CAT Pump – 10 Frame Piston Pump
Standard Brass CAT Pump Models 623,820,1010
Stainless Steel CAT Pump Models 621, 821,1011
Pulse Pump Manifold CAT Pump Models 625,825,1015
Stainless Steel CAT Pump Models 621, 821,1011
Pulse Pump Manifold CAT Pump Models 625,825,1015
FEATURES
Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Oversized crankshaft bearings with greater loading capacity mean longer bearing life.
Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
For complete CAT Pump Breakdown of these pumps CLICK HERE.
For the complete CAT Pump Service Manual for these pumps CLICK HERE.
Shop for CAT Pumps Click Here.
Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
General Pump EZ Series 44
• Standard SAE J609 gasoline mounting flange for
up to 13 hp engines
• Forged brass manifold with an exclusive lifetime
warranty and 3:1 hydrostatic rating
• Die-cast, anodized aluminum oil-bath crankcase
• Innovative one-piece plunger design to eliminate
water entering crankcase
• Premium roller bearing
• 5% reduction in crankcase load compared to
standard 3,000 PSI, 15 mm pumps
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions
Maximum Volume 4.0 GPM 3.5 GPM 3.0 GPM
Maximum Discharge Pressure 4000 PSI
Maximum Pump Speed 3400 RPM
Maximum Inlet Pressure 125 PSI
Maximum Inlet Vacuum 3 ft. water (2.6 in. Hg)
Plunger Bore .512 in. / 13 mm
Plunger Stroke .512 in. / 13 mm .433 in. / 11 mm .374 in. / 9.5 mm
Crankcase Oil Capacity 14.0 oz.
Maximum Fluid Temperature 165o F
Inlet Port Thread 1/2-14 BSPP-F
Discharge Port Thread 3/8-19 BSPP-F
Shaft Diameter 1.0 in. / 25.4 mm
Weight 20 lbs.
Dimensions 8.8” x 9.7” x 6.5”
List Price: $503.34
ALSO Spring is here, get a jump start on all your pressure washer and graffiti removal needs at ETS Co use code spring11 at check out BEFORE MAY 31st for 15% off your entire order!
Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
AR – ANNOVI REVERBERI RSV4G40H-F40 Pump
AR – ANNOVI REVERBERI RSV4G40H-F40 4GPM 4000PSI 1″ GAS
The AR – Annovi Reverberi RSV4G40H-F40,
Features
- MANIFOLD: NEW high efficiency design concept. Patented forged brass for strength and no porposity for long life and higher hydrostatic pressures
- BOLTS: Eight 6mm grade 8.8
- PLUNGERS: Ceramic coated stainless steel
- CRANKCASE: Precision die-cast cooling fins and anodized for maximum heat dissipation
- BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. this assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankcase from floating
- VALVES, SEATS AND SPRINGS: Stainless steel with specially designed ultra form cages to provide long life and positive seating
- SEALS AND V-PACKINGS: “V” style (D-1) buna-N strong and tightens under load
- OIL SEALS: All are constructed of Buna-N riubber
- PLUNGER RODS: Stainless steel construction for strength (no plating to scrape off) o-ring plunger sealing system
- CONNECTING RODS: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction for added load strength
Specifications for the AR – Annovi Reverberi RSV4G40H-F40,
- 1″ gas flange hollow shaft
- Built-in adjustable unloader
- Maximum flow: 4.0 GPM 15.1 LPM
- Maximum Pressure: 4000 PSI 275 BAR
- Minimum Horsepower: 15 Gas
- Maximum temperature: 140F
- Plunger: 15mm
- Oil Capacity: 16 oz
- Inlet thread: 1/2″ FPT
- Discharge thread: 3/8″ FPT
- Weight: 14 lbs.
List Price: $518.28
Our Price: $398.82
CLICK TO ORDERthe AR – Annovi Reverberi RSV4G40H-F40
You save $119.46!
CAT Pump 4SF40ELS – Sleeved Direct-Drive Plunger Pumps
CAT Pump 4SF40ELS – Sleeved Direct-Drive Plunger Pumps
CAT Pumps Direct Drive Plunger Pumps Breakdown Click Here.
Electric Models CAT Pump 4SF32ELS
CAT Pump 4SF40ELS, CAT Pump 4SF45ELS
CAT Pump 4SF50ELS
Gas Models CAT Pump 4SF30GS1
CAT Pump 4SF35GS1, CAT Pump 4SF40GS1
CAT Pump 4SF45GS1, CAT Pump 4SF50GS1
SPECIFICATIONS:
U.S. Metric U.S. Metric
Measure Measure Measure Measure
CAT Pump Models – Electric 4SF32ELS 4SF40ELS
Flow …………………………. 3.2 GPM (12.1 L/M) 4.0 GPM (15 L/M)
Max. Discharge Pressure 3500 PSI (245 BAR) 3500 PSI (245 BAR)
Max. RPM…………………. 1725 RPM (1725 RPM) 1725 RPM (1725 RPM)
Stroke ………………………. 0.311″ (7.9 mm) 0.382″ (9.7 mm)
CAT Pump Model – Electric 4SF45ELS 4SF50ELS
Flow …………………………. 4.5 GPM (17 L/M) 5.0 GPM (19 L/M)
Max. Discharge Pressure 3000 PSI (210 BAR) 3000 PSI (210 BAR)
Max. RPM…………………. 1725 RPM (1725 RPM) 1725 RPM (1725 RPM)
Stroke ………………………. 0.437″ (11.1 mm) 0.453″ (11.5 mm)
Cat Pump Models – Gas 4SF30GS1 4SF35GS1
Flow …………………………. 3.0 GPM (11.4 L/M) 3.5 GPM (13.2 L/M)
Max. Discharge Pressure 3500 PSI (245 BAR) 3500 PSI (245 BAR)
Max. RPM…………………. 3200 RPM (3200 RPM) 3200 RPM (3200 RPM)
Stroke ………………………. 0.173″ (4.4 mm) 0.197″ (5.0 mm)
CAT Pump Models – Gas 4SF40GS1 4SF45GS1,GS118
Flow …………………………. 4.0 GPM (15 L/M) 4.5 GPM (17 L/M)
Max. Discharge Pressure 3500 PSI (245 BAR) 3000 PSI (210 BAR)
Max. RPM…………………. 3200 RPM (3200 RPM) 3200 RPM (3200 RPM)
Stroke ………………………. 0.224″ (5.7 mm) 0.256″ (6.5 mm)
CAT Pump Models – Gas 4SF50GS1
Flow ………………………………………………………………….. 5.0 GPM (19 L/M)
Max. Discharge Pressure …………………………………….. 3000 PSI (210 BAR)
Max. RPM ………………………………………………………….. 3200 RPM (3200 RPM)
Stroke………………………………………………………………… 0.276″ (7.0 mm)
ELS = Electric 1-1/8″ hollow shaft with bolt mount
GS1 = Gas 1″ hollow shaft with bolt and adapter mount
GS118 = Gas 1-1/8″ hollow shaft with bolt and adapter mount
S = Sleeved piston rod
•For MAXIMUM SUCTION capability, Regulating Unloader should be remounted
on discharge manifold, OPPOSITE from inlet port.
Refer to pump Service Manual for repair procedures and additional
technical information.
CAT PUMP FEATURES
• Triplex design provides smoother liquid flow.
• Unique spring loaded inlet valves and the flow through ceramic
plungers allow excellent suction capabilities.
• Compact, hollow shafted pump for direct mounting to either
gas or electric motor, eliminates the need for pulleys, belts,
gearboxes.
• Regulating Unloader mounts directly on each pump to assure
system pressure control and pump protection.
• Convenient multiple porting provides installation flexibility.
COMMON CAT PUMP SPECIFICATIONS
Inlet Pressure Range (Electric) …………. –2 to 75 PSI (–0.14 to 5.25 BAR)
Inlet Pressure Range (Gas) ……………… Flooded to 75 PSI (Flooded to 5.25 BAR)
Bore………………………………………………. 0.787″ (20 mm)
Maximum Liquid Temperature…………… 160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Crankcase Capacity………………………… 23.66 oz. (0.70 L)
Inlet Port (1) …………………………………… 1/2″ NPTF (1/2″ NPTF)
By-Pass Port (1)……………………………… 3/8″ NPTF (3/8″ NPTF)
Discharge Ports 2) ………………………….. 3/8″ NPTF (3/8″ NPTF)
Auxiliary Port (1) …………………………….. 1/4″ NPTF (1/4″ NPTF)
Weight (Pump Only)………………………… 24.31 lbs. (11.0 kg)
Dimensions (Pump Only) …………………. 8.27 x 11.06 x 12.28″ (210 x281 x312 mm)
List Price: $1,471.62
Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
AR (Annovi Reverberi) Pump xmv3g27
AR (Annovi Reverberi) Pump xmv3g27
- MANIFOLD: High strength forged brass for long term use.
- BOLTS: Eight 6mm grade 12.9.
- PLUNGERS: A special thick solid ceramic for long life, strong durability and more resilience.
- CRANKCASE: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs.
- BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
- VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages to provide extra long life and positive seating.
- SEALS AND V-PACKINGS: Continuously lubricating for extended life.
- PLUNGER RODS: High strength stainless steel.
- CONNECTING RODS: One piece special alloy aluminum based, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength.
AR (Annovi Reverberi) Pump xmv3g27 parts breakdown pdf click here.
XMV3G27 Annovi Reverberi (AR) replacement pump. 3 gpm @ 2700 psi. Fits most gasoline powered engines between 5-7 hp with 3/4″ horizontal shaft with shaft key. Uses SAE 30 motor oil.
The frames of some pressure washer models do not allow proper hose connections (both garden supply & high pressure hoses). Be aware & conscious of this fact before ordering a different style replacement pump.
MODEL:
HD2500Gv2 1.194-112.0, 1194-1120, 11941120
HD2700DB 1.194-116.0, 1194-1160, 11941160
HD2700DH 1.194-117.0, 1194-1170, 11941170
HD2700DH 1.194-123.0, 1194-1230, 11941230
HD2700DHqc 1.194-118.0, 1194-1180, 11941180
HD2701DR 1.194-200.0, 1194-2000, 11942000
K7000G 1.187-104.0, 1187-1040, 11871040
CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD
Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
GIANT PUMP GXRH 2224
Horizontal/Vertical Pump with built-in Regulator, Thermal Relief Valve and Siphon Injector.
Specifications
Model GXR Series
GXR2224………………………………………………………………………………….2.2 GPM @ 2400 PSI
Maximum Inlet Pressure……………………………………………………………..Up to 90 PSIG1
RPM…………………………………………………………………………………………3450
Plunger Diameter ……………………………………………………………………….16mm
Stroke GXR2224 ……………………………………………………………………….4.7mm (6.1 o angle)
Crankcase Oil Capacity ………………………………………………………………4.7 fl. oz. (4.1 fl.oz. horizontal)
Temperature of Pumped Fluids ……………………………………………………Up to 80 oF
Inlet Port …………………………………………………………………………………..1/2″ NPT
Discharge Ports ………………………………………………………………………….3/8″ NPT
Shaft Rotation ……………………………………………………………………………Either Direction2
Weight………………………………………………………………………………………9 lbs.
Width ……………………………………………………………………………………….8.325″
Height ………………………………………………………………………………………6.45″
Swash Plate Bore (Horizontal) …………………………………………………….3/4″ x 3/16″ Keyway
Swash Plate Bore (Vertical) …………………………………………………………7/8″ x 3/16″ Keyway
Valve Type ………………………………………………………………………………..Polyamide Plastic
1 A 25 PSIG minimum inlet pressure is required.
2 The pump itself can be driven in either direction of rotation; however, the cooling fan
on TEFC motors must always be positioned so that the cooling air is drawn from the
non-drive end of the motor towards the pump.
CLICK HERE FOR GXR PUMP BREAKDOWN
List Price: $260.00
Our Price: $200.07
You save $59.93!