Annovi Reverberi Accessory – AL-QCOKIT3/8

The Annovi Reverberi Accessory – AL-QCOKIT3/8 is an o-ring kit, that comes with 25 o-rings that measure 3/8″. These o-rings are used in a number of places on a number of different pressure washer pumps from Annovi Reverberi.

This Annovi Reverberi Accessory – AL-QCOKIT3/8 seen above is made of Buna Rubberized material for long lasting use even in the harshest of environments. Even though they are durable, it is one of the most repaired parts of your pump, so be sure to stock up on a few of these kits so you are never without them for a quick on the job repair.

Not sure if your pump uses the o-rings from this Annovi Reverberi Accessory – AL-QCOKIT3/8? Just find your pumps breakdown / repair manual here and see. They should work on most pressure washer pumps AR makes, but if your can’t find your manual above or are still having issues, give us a quick call and we will be happy to help you determine if this is the right sized o-rings your need for in the field fixes. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this Annovi Reverberi Accessory – AL-QCOKIT3/8? Do so by clicking here and ordering one or more from our secure eCommerce store.

October 16, 2017

LANDA High Limit Switch 8.712-297.0

The LANDA High Limit Switch 8.712-297.0 is rated for 230 Degrees and has a 42″ wired lead. This pig tailed switch is and OEM from LANDA that will work on most machines it makes, and is easy to install.

This LANDA High Limit Switch 8.712-297.0 runs as the safety device that will shut off your machines burner and in turn prevent water in the unit from over heating and turning into steam. The device will not let the LANDA machine turn back on until the water had cooled to about 50 to 70 degress.

Features of this for this LANDA High Limit Switch 8.712-297.0:

HEAVY DUTY BRASS HOUSING.
UL – CSA RATED BIMETAL SWITCH COMPONENTS.
¼” MALE SPADE LUG TERMINALS.
NORMALLY USED WITH AN ADJUSTABLE OR FIXED RANGE THERMOSTAT.

Not sure if this LANDA High Limit Switch 8.712-297.0 is the correct fix for your LANDA Pressure Washer? Find your machines breakdown / repair manual here to verify if this is the correct fix for your unit. Don’t see your breakdown here? Give us a call toll free and a specialist will be happy to assist you to get you up and running fast.

Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order this repair part for your LANDA Machine? Click here to order safely and securely on our eCommerce site here.

September 28, 2017

CAT Pumps – 8210 – Coupler Assembly

This blog is for a CAT Pumps – 8210 flex coupler assembly kit. It has everything you need in it to reduce the space requirements needed for belt driven or gearbox assemblies.

The CAT Pumps – 8210 was designed by CAT to work with 145 TC motors with horse powers up to 3. This assembly also eliminates the need for belt selection, sizing and adjusting to work properly.

CAT Pumps – 8210 – Coupler Assembly has the following specs:

Can adjust from 16.5 mm to 7/8″
The kits compact direct mounting feature reduces space required for belts or gearbox drive assemblies
This item insulates against heat transfer
Special urethane flexible spyder designed for extended life with high temperature and high RPM

Not sure if this coupler assembly is the correct reducing kit for your CAT Pump? Give us a call toll free and a CAT Pump specialist will be happy to assist you with your unit. We are here from 7:30 am to 4:00 pm M-F EST. Call 1-877-824-7763 {Smart Phones Click to Call}

Want to try to determine yourself if this is the correct repair kit? Find your CAT Pump on our breakdown / repair manual page here.

If you are sure the CAT Pumps – 8210 is correct for your pressure washer, you can order it here directly on our eCommerce store.

We may be able to get this unit to you at a better price! Call us before you order! Call 1-877-824-7763 {Smart Phones Click to Call}

The 8210 is priced above $50.00 making it orderable with our 5% off everyday sale at shopetsonline.com. Just use code 5off at checkout to get an additional 5% off your subtotal.

September 21, 2017

General Pumps Kit 6 – K06 The Piston and Bolt Assembly

K06 also known as General Pumps kit 6 is the complete piston and bolt assembly repair kit for most general pumps on the market today, used on a host of top of the line pressure washers. If you pressure washer is running a general pump, odds are this is the piston bolt kit you need to fix it.

The K06 repair kit contains everything you need to repair three cylinders on your general pressure washer pump.

k06 - kit 6 piston and bolt assembly — k06 – kit 6 piston and bolt assembly

Need to be sure you are ordering the right repair kit for you pump? Find your general pump repair manual (also called a pump breakdown) by clicking here. Once you find your pumps manual look to see if the K06 is the repair kit you need for your cylinders.

The K06 Kit contains the following repair items:

3 O-rings that measure (0.426 x 0.070) part number 90.3585.00
3 of the Washer (M14) part number 96.7286.00
3 Ring (back up) part numbered 90.5067.00
3 of the Washer part number 96.7280.00
3 Screws (plunger) with a part number 47.2195.66

Not sure if this repair kit is the right item for getting you back up and running? Give our General Pump specialist a call and we will be happy to assist you in determining the correct kit for your piston repair. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order the K06 repair kit and fix your pump today? Click here to order the item on our eCommerce store.

As always remember that if your order is over $50.00 you can add the coupon code “5off” to get 5% off your subtotal.

September 18, 2017

AR1864 Valve Repair Kit for Annovi Reverberi Pumps

AR1864 is a valve repair kit made by Annovi Reverberi for repairing its XM, XT and HPE line of pressure washer pumps. The kit comes complete with everything that you need to DYI and repair the 6 valves on one of these pumps.

The AR1864 valve repair kit is also used in repairing XMV3G32 series of pump, found in AR North Americas Pump Package XMV3G32-PKG. Best thing about this kit is you only need one of them per pump, it comes with everything to replace the valves that are leaking or broken.

The AR1864 Valve Repair Kit comes with the following items:

A quantity of six valves.
The six o-rings you will need to re-seat the valves.

Not sure if you own a pump that this kit is used on? Find your pumps repair / breakdown manual by searching here for it and then seeing if the AR1864 Valve Repair Kit is on it.

Still can’t determine if this repair kit is the one that will get you up and running fast? Give one of our Annovi Reverberi pump specialists a call and they will help you determine the correct repair kit. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to place that order for the AR1864 Valve Repair Kit? Do so easily and securely by clicking here to order it hassle free on our eCommerce site.

Also, don’t forget that all orders over $50.00 can have a coupon code added at checkout by you to receive an additional 5% off! Just use code 5off when on checkout page to have the discount apply.

September 13, 2017

General Pumps Oil Seal Kit K03 – also called Kit 3 Shaft Guide‎

K03 – Kit 3 from General pump is the shaft guide oil seal kit, that is used on most general pumps for repairing shaft seals of your pressure washers general pump. It is one of the more common repair parts / kits and is very do it yourself friendly.

This oil seal K03 – Kit 3 contains two pieces in it for this repair that measure 30 x 55 x 7 mm. Only one is needed for the shaft.

The K03 – Kit 3 Oil Seal Shaft kit works for the following pumps:

Fits General Pump Models:

CW2004	CW2040	CW24
CW3040	T1011	T1311
T1321	T1511	T1621
T1631	T5050	T9121
T9131	T9161	T921
T9211	T9281	T9321
T9791	TS1011	TS1021
TS1311	TS1321	TS1331
TS1351	TS1511	TS1521
TS1621	TS1711	TS2011
TS2012SS	TS2016SS	TS2021
TS821	TS921	TSF2021
TSF2221	TSF2421

Fits Interpump Pump Models:

W101	W131	W132
W151	W162	W163
W201	W203	W912
W913	W916	W92
W921	WS101	WS102
WS131	WS132	WS133
WS135	WS151	WS152
WS162	WS171	WS202

Don’t see your pump above? Don’t worry, we have you covered! You can either check your pumps breakdown / repair manual here to see if this kit will work on your unit. Or you can give us a call today toll free and we will help you figure out if this is the correct repair kit for your pressure washer pump. Call 1-877-824-7763 {Smart Phones Click to Call}

You can also check out our General Pumps Site for almost every pump breakdown and repair kit as well and daily tweets by clicking here.

See that the K03 – Kit 3 General pump kit works on your unit? Then feel free to order it easily and securly on our eCommerce site by clicking here.

September 12, 2017

General Pumps Kit 2 – K02 Oil Seal Kit

The general pumps kit 2, which is called K02 on most pump repair / breakdown manuals is for the piston guide repair of most General pumps. The kit is officially knows as an Oil Seal Piston Guide Kit.

K02 or kit 2 replaces the three oil seals in crankcase behind the pump head of yor general pump. The crankshaft seal is NOT included in this repair kit that needs to be ordered separately. This kit is also a replacement for the Graco Kit# 801473 on 3040 and 3235 pressure washers you may own.

General Pumps Kit 2 - K02 Oil Seal Kit — General Pumps Kit 2 – K02 Oil Seal Kit

Not sure if the K02 or Kit 2 from General pump is the right repair kit you need or not sure what pump you have? Find all our pump breakdowns / repair kits by clicking here to see if this is the right fix for your pressure washer.

This K02 kit is designed to be used on (but not limited to) the following pumps:

T1011
T1321
T1511
T1621
T2011
T9131
T9161
T921
T9211
T9281
TS1011
TS1021
TS1321
TS1511
TS1621
TS1711
TS2011
TS2011
TS2021
TS821
T5050

As well as the CW47 Series, Emperor, T47 Series, TSF & TSP 66 Series & HTS2215S. But, please check your pumps repair manual to be sure if you don’t see it listed above.

Still not sure if this K02 or kit 2 is right for your repair needs? Give us a call and a general pump specialist will be happy to assist you with all your questions about this kit. Call 1-877-824-7763

Ready to order and get your pressure washer back up and running? Do so by clicking here to purchase your kit today on our SSL e-Commerce site.

September 7, 2017

Annovi Reverberi AR1265890 Inlet By Pass Adapter

AR1265890 is the Inlet by-pass adapter made by Annovi Reverberi and AR North America for most of it’s pumps. It can also be written or seen as AR 1265890.

This AR1265890 adapter is made of solid black plastic and is a durable and cheap replacement if your pressure washer pump has stopped working. It’s one of the first things you should check as it can fail easily, but is also easily replaced.

AR1265890 By-Pass Adapter

Not sure if this item is the correct fix for your Annovi Reverberi pump? Feel free to give us a quick call and we will help you determine if the AR1265890 By-Pass Adapter will work on your machine. Call 1-877-824-7763

You can also find your pumps breakdown / repair manual here and determine yourself if this is the right repair part for your needs.

If your sure this is the correct inlet adapter for your pressure washers pump then you can order it directly and securly on our eCommerce site by clicking here: AR1265890

September 6, 2017

Annovi Reverberi Kit – AR2544 – PISTON SET Kit

This blog is for the piston repair kit AR2544 also known as AR 2544 from Annovi Reverberi. This kit is used to repair the pistons on the XM, XMV and XMA series of pumps from AR North America.

This AR2544 or AR 2544 is one of the first items you can look at to repair your pump for your pressure washer should it stop pumping. And fixing these will get you back up and running fast.

This AR2544 / AR 2544 Piston Repair Kit contains the following items:

3 of part number AR480480 which is the O-Ring that measures 14 x 1.78
3 of part number AR1260091 which is a Washer / Slinger made of Brass
3 of part number AR1780070 the Plunger made for solid Ceramic
3 of part number AR1260100 which is the Piston Washer
3 of part number AR1260110 which is the Nut that measures an M8

Need help determining if the AR2544 / AR 2544 Piston Repair Kit is the correct item for your pump? Click here to find your pumps breakdown / repair manual to see if this is the exact part number you need.

If you have found your pumps repair manual and are still not sure if the AR2544 / AR 2544 kit is correct for you, please give us a call and we will be happy to help you determine the correct pistons for your pump on your pressure washer. Call 1-877-824-7763

Ready to order the Piston Repair Kit? Click here to order securely on our eCommerce site.

August 30, 2017

General Pump Kit – 52040009 Ceramic Plunger

Part number 52040009 is a ceramic plunger repair part from General Pumps. While it is called a kit, it is basically 1 plunger, and you will need to order 1 kit for every plunger your pressure washer pump has damaged.

The 5204009 is used on many different general pump units. That include, but is not limited to the following pumps: EZ2545E, EZ3030G34, EZ3035G, EZ3040G, EZ3040S, EZ3045G, TT9351, TT9441, TX1508G8, TX1510G8, TX1510S34. It may also be used on many more, to see if it is used on your unit find your breakdown / repair manual here.

General Pump Kit - 52040009 Ceramic Plunger — General Pump Kit – 52040009 Ceramic Plunger

If after looking up your pump above on our breakdown / repair manual page for General Pumps you can still not determine if the 52040009 Ceramic Plunger kit is the correct plunger for your pressure washer pump, please give us a call and our General Pump Specialist will be able to assist you in getting the correct part to get you up and running fast. Call 1-877-824-7763

Need more than plungers for your General Pump? We have you covered there too. Any part you find that needs to be repaired, we can get for you. Just find the part number on your pumps breakdown / repair manual and put it in the search bar on our e-commerce page and add it to your cart along with the correct number of 52040009 plungers you need by clicking here. The search bar will be in the upper left hand corner of the page. Repairing your pump almost always is cheaper than getting a brand new one, especially when it comes to General Pumps.

Don’t need any other parts to get your pressure washer up and working for you then simply click here to order the 52040009 ceramic plunger kit today!

Save