Hypro / Shurflo Pumps – 2088-573-143 Marine unit is a replacement pump with a high flow rate and moderate pressure. The pump is made to replace marine pumps that require a 4 GPM flow.
2088-573-143 pumps are made in a wide array of chemical resistant materials, are versatile enough to be mounted for use in any position and are very easy to repair should you need to fix it. This pump is also available in a number of voltages, ask us about that when you call. Call 1-877-824-7763
2088-573-143 pump
This SHURFLO® 2088-573-143 pump has the following specifications:
The unit is a Self-Priming pump that is good up to 12 Vertical Feet [3.7M]
Being made of Chemically Resistant Materials make this pump long lasting.
Automatic Demand on the unit makes for quick start up and work flow.
The pump has Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid into the machine.
Ready to order this 2088-573-143 pump? You can do so online and safe and securely on our site by clicking here. Also don’t forget to use our coupon code at check out. It’s always valid on purchases of $50.00 of more. Just enter the code “5off” on your cart page to get a 5% discount on the subtotal as long as the total purchase price is over $50.00.
The 8090-802-270 is a diaphragm pump from Hypro Pumps that is used for replacing a non working pump that has a 30 maximum PSI rating, at 180 degrees working temperature maximum.
This 8090-802-270 unit is self priming and weights in at only 4.7 pounds. It’s typical use is for soil extraction and has an rating of 80 PSI in bypass mode.
8090-802-270 Pump
The fasteners are made of zinc plated steel, and the valves are of the strongest viton making this 8090-802-270 Pumps durable both inside and out. Intermittent cycling and the 230 voltage rating make this unit one of the more versatile diaphragm pumps on the market today.
If you are not sure if the Shurflow 8090-802-270 Pump is the right unit for your machine, you can give us a call here toll free and we will help in assisting you with getting the right diaphragm pump for your needs. Call 1-877-824-7763
Are you a DIYer? If so you can find most pump breakdowns / repair manuals for Hypro and Shurflow by clicking here and finding your unit and ordering parts to repair it, instead of replacing it with a new one. Although, we would recommend just purchasing a new one most of the time, as the hours spent on assembling and disassembling the unit to repair it could extend your down time.
Ready to order a new one, call us above or order it securely online by clicking here: 8090-802-270 Pump
Here is a blog for the 8000-147-299 pump from Hypro Pumps. This unit is in the 8000 series of MPU pumps and is quickly becoming one of the standards used for chemical spraying and other environments where standing up to chemicals is vital.
The 8000-147-299 is rated at 1.4 gallons per minute with a flow rate of 65 PSI which is on the lower end of things, but this pump is used mostly to spray chemicals and therefore high pressure is not needed.
Hypro Pumps 8000-147-299
If you are in the business of chemical spraying and your machine has stopped pumping your chemicals, most likely this is a pump failure. Whether you have a Hypro Pumps 8000-147-299 or not, this would be the best replacement pump for your needs. This unit is specifically designed with spherically shaped valves and an automatic demand switch, meaning this unit will deliver consistent and very dependable operation and priming making it perfect for your needs.
If you are not totally sure if this is the correct item for your sprayer, then give us a call and one of our Hypro Pump specialists will be glad to assist you in determining if the 8000-147-299 is the pump for you.
More hypro pumps service manuals can be found here if you are a do it yourselfer and wish to try to repair your existing unit. Don’t see your unit in the breakdown / repair manuals section of our site? Give us a call toll free and we will get one for your pump to you. Call 1-877-824-7763
