|
Reel is
supported on both sides by pedestal arms. The pedestal arms stay rigid
when the hose is pulled at an angle.
Hose is
guided on both sides, eliminating side to side bending, resulting in less
wear on both reel and hose. Guide arms are adjustable to many different
mounting positions to provide the ideal configuration for wall, floor,
ceiling, pit or truck mounting. Large mounting base allows greater
stability in off-road applications.
BUILT
FOR RUGGED DUTY INSTALLATIONS
- Off-road truck lubrication
- Heavy
industrial
- Mines
- Railroads - Transportation
- Any
other rugged requirement
- Reel
supported on both sides by pedestal style base and arm guides
- Triple support points to the center shaft
- Heavy
duty 1/4" plate steel support post and mounting plate
- 1"
solid steel center support shaft
- 1"
oil-lite self-lubricating bearing
- Full
flow swivel joint
- Adjustable arm guides (wall, floor, ceiling and pit)
- Cartridge style spring motor
- 6-roller, non-snag hose guide
- 8-position locking ratchet
The standard hose is for air or water service only. The basic
reel without hose can be used for air, water or oil. Consult factory for
other products. Maximum temperature with hose 150 degrees
Fahrenheit.
| DO
NOT USE WITH RATIO PUMP |
| MODEL |
HOSE |
PSI |
APPRX.
SHIP
WT.
(lbs) |
SIZE
INDEX
(Chart) |
LESS HOSE |
| I.D. |
O.D. |
FT. |
MODEL |
PSI |
APPRX.
WT.
(lbs) |
| TSH-N-350 |
3/8" |
21/32" |
50 |
300 |
66 |
7 |
TSHL-N-350 |
300 |
58 |
| TSH-N-375 |
3/8" |
21/32" |
75 |
300 |
90 |
9 |
TSHL-N-375 |
300 |
80 |
| TSH-N-3100 |
3/8" |
21/32" |
100 |
300 |
97 |
9 |
TSHL-N-3100 |
300 |
81 |
| TSH-N-450 |
1/2" |
27/32" |
50 |
300 |
75 |
8 |
TSHL-N-450 |
300 |
63 |
| TSH-N-475 |
1/2" |
27/32" |
75 |
300 |
92 |
9 |
TSHL-N-475 |
300 |
76 |
| TSH-N-4100 |
1/2" |
27/32" |
100 |
300 |
102 |
9 |
TSHL-N-4100 |
300 |
81 |
| TSH-N-535 |
3/4" |
1-5/32" |
35 |
250 |
84 |
11 |
TSHL-N-535 |
300 |
72 |
| TSH-N-550 |
3/4" |
1-5/32" |
50 |
250 |
94 |
11 |
TSHL-N-550 |
300 |
75 |
| TSH-N-635 |
1" |
1
7/16" |
35 |
300 |
95 |
12 |
TSHL-N-635 |
300 |
75 |
Reels are furnished standard with S.A.E. 100R1 AX thin cover one
wire braid hose suitable for air, water or oil applications. Maximum
temperature 250 degrees Fahrenheit.
| MODEL |
HOSE |
PSI |
APPRX.
SHIP
WT. (lbs) |
SIZE
INDEX
(Chart) |
LESS HOSE |
| I.D. |
O.D. |
FT. |
MODEL |
PSI |
APPRX.
WT. (lbs) |
| TMP-N-350 |
3/8" |
5/8" |
50 |
3000 |
72 |
8 |
TMPL-N-350 |
3000 |
61 |
| TMP-N-375 |
3/8" |
5/8" |
75 |
3000 |
94 |
9 |
TMPL-N-375 |
3000 |
76 |
| TMP-N-450 |
1/2" |
3/4" |
50 |
2500 |
77 |
8 |
TMPL-N-450 |
2500 |
64 |
| TMP-N-475 |
1/2" |
3/4" |
75 |
2500 |
97 |
9 |
TMPL-N-475 |
2500 |
76 |
| TMP-N-525 |
3/4" |
1" |
25 |
1250 |
72 |
10 |
TMPL-N-525 |
1250 |
63 |
| TMP-N-535 |
3/4" |
1" |
35 |
1250 |
86 |
11 |
TMPL-N-535 |
1250 |
75 |
| TMP-N-550 |
3/4" |
1" |
50 |
1250 |
91 |
11 |
TMPL-N-550 |
1250 |
75 |
Reels are furnished standard with S.A.E. 100R2 FX thin cover two
wire braid hose suitable for grease and hydraulic oil applications.
Maximum temperature 250 degrees Fahrenheit.
| MODEL |
HOSE |
PSI |
APPRX.
SHIP
WT.
(lbs) |
SIZE
INDEX
(Chart) |
LESS HOSE |
| I.D. |
O.D. |
FT. |
MODEL |
PSI |
APPRX.
WT.
(lbs) |
| THP-N-150 |
1/4" |
17/32" |
50 |
5000 |
75 |
8 |
THPL-N-150 |
5000 |
64 |
| THP-N-175 |
1/4" |
17/32" |
75 |
5000 |
98 |
9 |
THPL-N-175 |
5000 |
83 |
| THP-N-1100 |
1/4" |
17/32" |
100 |
5000 |
105 |
9 |
THPL-N-1100 |
5000 |
83 |
| THP-N-350 |
3/8" |
43/64" |
50 |
4000 |
79 |
10 |
THPL-N-350 |
4000 |
64 |
| THP-N-375 |
3/8" |
43/64" |
75 |
4000 |
103 |
11 |
THPL-N-375 |
4000 |
81 |
The standard hose is for fuel service only. The basic reel
without hose can be used for air, water or oil. Consult factory for
other products. Maximum temperature with hose 150 degrees
Fahrenheit.
| DO
NOT USE WITH RATIO PUMP |
| MODEL |
HOSE |
PSI |
APPRX.
SHIP
WT.
(lbs) |
SIZE
INDEX
(Chart) |
LESS HOSE |
| I.D. |
O.D. |
FT. |
MODEL |
PSI |
APPRX.
WT.
(lbs) |
| TSHF-N-550* |
3/4" |
1-5/32" |
50 |
300 |
94 |
11 |
TSHL-N-550 |
300 |
75 |
| TSHF-N-635* |
1" |
1
7/16" |
35 |
300 |
95 |
12 |
TSHL-N-635 |
300 |
75 |
*These reels are
supplied with fuel hose.
|
DUAL HYDRAULIC REELS
(TDMP) |
COXREELS' TDMP hose reels are large-capacity dual-hydraulic hose
reels equipped with a dual full flow swivel joint that offers a
one-sided supply and return hook-up. The entire width of the reel is a
narrow 10-3/4".
Reels
are furnished standard with S.A.E. 100R1 Ax thin cover one-wire braid
hose suitable for air, water or oil applications. Maximum temperature
250 degrees Fahrenheit.
| MODEL |
HOSE |
PSI |
APPRX.
SHIP
WT. (lbs) |
SIZE
INDEX
(Chart) |
LESS HOSE |
| I.D. |
O.D. |
FT. |
MODEL |
PSI |
APPRX.
WT. (lbs) |
| TDMP-N-350 |
3/8" |
5/8" |
50 |
3000 |
101 |
13 |
TDMPL-N-350 |
3000 |
83 |
| TDMP-N-450 |
1/2" |
3/4" |
50 |
2500 |
105 |
13 |
TDMPL-N-450 |
3000 |
83 |
HOSE
INFO: DO NOT EXCEED OUR LISTED HOSE O.D.
TO OBTAIN MAXIMUM HOSE
LENGTH.
SIZE
INDEX |
OVERALL REEL
DIMENSIONS |
| WIDTH |
HEIGHT |
LENGTH |
| 7 |
8-3/4" |
21-3/16" |
19-5/8" |
| 8 |
9-1/4" |
21-3/16" |
19-5/8" |
| 9 |
9-1/4" |
25-1/2" |
23" |
| 10 |
9-3/4" |
21-3/16" |
19-5/8" |
| 11 |
9-3/4" |
25-1/2" |
23" |
| 12 |
10" |
25-1/2" |
23" |
| 13 |
10-3/4" |
26-1/4" |
23" | |
|
