Hypro / Shurflo Pumps – 2088-573-143 Marine unit is a replacement pump with a high flow rate and moderate pressure. The pump is made to replace marine pumps that require a 4 GPM flow.
2088-573-143 pumps are made in a wide array of chemical resistant materials, are versatile enough to be mounted for use in any position and are very easy to repair should you need to fix it. This pump is also available in a number of voltages, ask us about that when you call. Call 1-877-824-7763
2088-573-143 pump
This SHURFLO® 2088-573-143 pump has the following specifications:
The unit is a Self-Priming pump that is good up to 12 Vertical Feet [3.7M]
Being made of Chemically Resistant Materials make this pump long lasting.
Automatic Demand on the unit makes for quick start up and work flow.
The pump has Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid into the machine.
Ready to order this 2088-573-143 pump? You can do so online and safe and securely on our site by clicking here. Also don’t forget to use our coupon code at check out. It’s always valid on purchases of $50.00 of more. Just enter the code “5off” on your cart page to get a 5% discount on the subtotal as long as the total purchase price is over $50.00.
RMV2.5G30D replacement pressure washer pump from Annovi Reverberi. This pump is for repair of pressure washers that have a flow rate of 2.5 gallons per minute and a maximum rating of 3000 PSI. The unit spins at a industry standard of 3400 RPM.
The RMV2.5G30D can connect to a direct drive system of a gas powered pressure washer that has a mounting shaft size of 3/4″. The pump is equipped with a built in chemical injector and has an installed pressure control valve all standard, making it the perfect replacement pump for most home pressure washers on the marked today.
RMV2.5G30D replacement pressure washer pump
The Rmv2.5G30D has the following specifications:
The pump features a 3/4″ hollow shaft and operates at 3400 RPM, with a max PSI of 3000.
This unit has a Max Flow (in GPM) of 2.5
The Max Flow (in L/Min) is 9.5
The pump has a Max Bar of 200
Power of this unit in EBHP is rated at 4.3
This pump has a Bore Diameter of 12mm
Stroke on this unit is 9.7mm
Crankshaft has an ID Stamp of 1
Check your pressure washer, you might already have an RMV2.5G30D installed on it. If this is the case and it has stopped working you may be able to repair this pump yourself. You can find the pumps breakdown / repair manual by clicking here. Or if you are not sure if this is the pump you have installed but want to try to fix it before you replace it you can find all the Annovi Reverberi Pump Breakdowns / Repair Manuals here.
Still not sure if you own or even can use a RMV2.5G30D pump? Just give us a call and we will be more than happy to assist you in figuring out what you have and what will work best for your pressure washer. Call us toll free at Call 1-877-824-7763 {Smart Phones Click to Call}
K03 – Kit 3 from General pump is the shaft guide oil seal kit, that is used on most general pumps for repairing shaft seals of your pressure washers general pump. It is one of the more common repair parts / kits and is very do it yourself friendly.
This oil seal K03 – Kit 3 contains two pieces in it for this repair that measure 30 x 55 x 7 mm. Only one is needed for the shaft.
K03 – Kit 3
The K03 – Kit 3 Oil Seal Shaft kit works for the following pumps:
The general pumps kit 2, which is called K02 on most pump repair / breakdown manuals is for the piston guide repair of most General pumps. The kit is officially knows as an Oil Seal Piston Guide Kit.
K02 or kit 2 replaces the three oil seals in crankcase behind the pump head of yor general pump. The crankshaft seal is NOT included in this repair kit that needs to be ordered separately. This kit is also a replacement for the Graco Kit# 801473 on 3040 and 3235 pressure washers you may own.
General Pumps Kit 2 – K02 Oil Seal Kit
Not sure if the K02 or Kit 2 from General pump is the right repair kit you need or not sure what pump you have? Find all our pump breakdowns / repair kits by clicking here to see if this is the right fix for your pressure washer.
This K02 kit is designed to be used on (but not limited to) the following pumps:
T1011
T1321
T1511
T1621
T2011
T9131
T9161
T921
T9211
T9281
TS1011
TS1021
TS1321
TS1511
TS1621
TS1711
TS2011
TS2011
TS2021
TS821
T5050
As well as the CW47 Series, Emperor, T47 Series, TSF & TSP 66 Series & HTS2215S. But, please check your pumps repair manual to be sure if you don’t see it listed above.
Still not sure if this K02 or kit 2 is right for your repair needs? Give us a call and a general pump specialist will be happy to assist you with all your questions about this kit. Call 1-877-824-7763
Ready to order and get your pressure washer back up and running? Do so by clicking here to purchase your kit today on our SSL e-Commerce site.
The 8090-802-270 is a diaphragm pump from Hypro Pumps that is used for replacing a non working pump that has a 30 maximum PSI rating, at 180 degrees working temperature maximum.
This 8090-802-270 unit is self priming and weights in at only 4.7 pounds. It’s typical use is for soil extraction and has an rating of 80 PSI in bypass mode.
8090-802-270 Pump
The fasteners are made of zinc plated steel, and the valves are of the strongest viton making this 8090-802-270 Pumps durable both inside and out. Intermittent cycling and the 230 voltage rating make this unit one of the more versatile diaphragm pumps on the market today.
If you are not sure if the Shurflow 8090-802-270 Pump is the right unit for your machine, you can give us a call here toll free and we will help in assisting you with getting the right diaphragm pump for your needs. Call 1-877-824-7763
Are you a DIYer? If so you can find most pump breakdowns / repair manuals for Hypro and Shurflow by clicking here and finding your unit and ordering parts to repair it, instead of replacing it with a new one. Although, we would recommend just purchasing a new one most of the time, as the hours spent on assembling and disassembling the unit to repair it could extend your down time.
Ready to order a new one, call us above or order it securely online by clicking here: 8090-802-270 Pump
This post is for the 5315C-X which is made from Hypro Pumps and is in there 5300 series of pressure pumps for sprayers. This assembly is designed for long life and will get your sprayer up and running fast.
The 5315C-X pump is rated for sprayers that need a flow rate of 1.5 gallons per minute and a maximum pressure of 500 PSI. It is also recommended for units that spin at no more that 1800 RPM.
5315C-X Pump from hypro pumps.
Hypro Pumps 5315C-X has the following technical specifications:
The pump has a 1.5 MAX GPM
500 is the MAX PSI for this 5315C-X
This unit spins at an 1800 MAX RPM
The pump is made from cast iron for durability.
The unit has a 5/8″ OD SOLID SHAFT for mounting
This unit has 1/2″ NPT PORTS for inlet and outlet.
140 DEGREES F is the maximum operation temperature for this pump.
These pumps are perfect for non abrasive or general chemical spraying situations, the body is made of cast iron with the inside valves and parts being made of stainless steal. It also has leather reinforced seals making this perfect to get you back up an spraying for a long time.
Ready to order this unit for your sprayer or pressure pump? Please either call us at the number above or you can order it securely on our eCommerce site by clicking the link here: 5315C-X
AR1265890 is the Inlet by-pass adapter made by Annovi Reverberi and AR North America for most of it’s pumps. It can also be written or seen as AR 1265890.
This AR1265890 adapter is made of solid black plastic and is a durable and cheap replacement if your pressure washer pump has stopped working. It’s one of the first things you should check as it can fail easily, but is also easily replaced.
Not sure if this item is the correct fix for your Annovi Reverberi pump? Feel free to give us a quick call and we will help you determine if the AR1265890 By-Pass Adapter will work on your machine. Call 1-877-824-7763
If your sure this is the correct inlet adapter for your pressure washers pump then you can order it directly and securly on our eCommerce site by clicking here: AR1265890
This blog is for the piston repair kit AR2544 also known as AR 2544 from Annovi Reverberi. This kit is used to repair the pistons on the XM, XMV and XMA series of pumps from AR North America.
This AR2544 or AR 2544 is one of the first items you can look at to repair your pump for your pressure washer should it stop pumping. And fixing these will get you back up and running fast.
AR2544 / AR 2544 Piston Repair Kit.
This AR2544 / AR 2544 Piston Repair Kit contains the following items:
3 of part number AR480480 which is the O-Ring that measures 14 x 1.78
3 of part number AR1260091 which is a Washer / Slinger made of Brass
3 of part number AR1780070 the Plunger made for solid Ceramic
3 of part number AR1260100 which is the Piston Washer
3 of part number AR1260110 which is the Nut that measures an M8
If you have found your pumps repair manual and are still not sure if the AR2544 / AR 2544 kit is correct for you, please give us a call and we will be happy to help you determine the correct pistons for your pump on your pressure washer. Call 1-877-824-7763
The RK15.28HN is a replacement pump made by Annovi Reverberi or AR Pumps for pressure washers that require a flow rate of 3.96 gallons per minute and a maximum pressure rating of 4000 PSI.
This RK15.28HN pump spins at 1450 RPM and is made to mount on units that require a 24mm shaft. The unit is made to work with gearbox , belt drive, coupling drive systems, electric motor 182-184 frame driven systems, and even gasoline engine driven systems.
RK15.28HN replacement Pressure Pump from Annovi Reverberi
Replacement pump RK15.28HN has the following specifications:
The maximum flow volume of the pump is 4.0 GPM
This unit has a maximum pressure rating of 4,000 PSI
RK15.28HN has a maximum Pump Speed of 1450 RPM
The Brake Horespower of this unit is 11.0
A Shaft Size diameter of 24mm is standard for this pump
The RK15.28HN Weights 20 lbs.
This RK15.28HN unit has the features standard:
The Manifold is made of High strength forged brass for long term use
Pump Bolts are Eight 8mm grade 8.8
Plungers of this unit are made of special thick ceramic for long life, strong durability, and more resilience
The Crankcase is made from Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
This pump has Bearings that are Oversized tapered roller bearing for maximum life and load disbursement
The Bearing Support are also of Precision die cast and machined to assure concentricity and alignment
Valves, Seats, and Springs on the RK15.28HN are made from Stainless steel with specially designed Ultra Form cages to provide long life and positive seating
Seals and V-packing of the pump are Continuously lubricating for extended life
The Plunger Rods are made from Stainless steel construction for strength, no plating to scrape off, back up and oring plunger sealing system
Connecting Rods on the RK15.28HN are all One piece special alloy aluminum for higher pressure, oversized for maximum strength, load disbursement, and long life
If you are not sure if the RK15.28HN pump is the correct replacement for your pressure washer, you can give us a call anytime and one of our specialists will be glad to assist you in determining if this is the correct pump or if another unit might be more beneficial to your pressure washer. Call 1-877-824-7763
This is information for the Comet Pump 6305.1800.00 PUMP also called the ZWD 4035 G. This pump is for pressure washers that have a flow rate of 4.0 GPM and a maximum pressure of 3500 PSI. This unit is for machines that spin at 3400 RPM.
The 6305.1800.00 PUMP also called the ZWD 4035 G is a replacement pressure washer pump that mounts to a gas engine and has a reversible crankshaft that allows it to be connected to either a right or left hand mounting system.
6305.1800.00 PUMP also called the ZWD 4035 G
6305.1800.00 PUMP also called the ZWD 4035 G has the following specifications:
The zwd 4035 G has a Maximum Volume of 4.0 gpm
This pump has a Max. Discharge Pressure of 3500 psi
6305.1800.00 also has a Maximum Pump Speed 3400 rpm
The Inlet Port Thread of this pump is 1/2 FPT
This unit has a Discharge Port Thread of 3/8 FPT
The zwd 4035 G has a Shaft Diameter of 1″ and is Hollow
Pistons on the 6305.1800.00 are 15mm
Weight of this unit is 16.5 lbs.
Some other features of the 6305.1800.00 PUMP also called the ZWD 4035 G are that the unit has:
1/2 FPT Inlet — 3/8 FPT Discharge
Anodized, Die-Cast Aluminum Crankcase
Solid Ceramic Plungers
Stainless Steel Check Valves
Buna-Textile V-Packings
If your pressure washers pump has stopped working and you need a new one with the above specifications this 6305.1800.00 PUMP also called the ZWD 4035 G is a very good and reliable pump to purchase. If you are not sure if this unit is correct or will work on your machine, give us a call and we will be happy to help you figure out the best item to get you back up and pressure washing fast. Call 1-877-824-7763
Do you already own a 6305.1800.00 PUMP also called the ZWD 4035 G? And need to repair it? Just click here to get the breakdown / repair manual for your unit.
