Tag: Pressure Washers

Posted on

RMW2.5G28-EZ-SX pump from Annovi Reverberi

RMW2.5G28-EZ-SX pump from Annovi Reverberi is a vertical style pump that mounts the back of your pressure washer. This pump is rated 2.5 gallons per minute and has a maximum PSI of 2800.  This unit can also be written as RMW25G28-EZ-SX.

The RMW2.5G28-EZ-SX pump from Annovi Reverberi spins at 3400 RPM and is one of the more commonly used pumps on your home improvement or big box store bought pressure washer.  Don’t by a whole new unit from Home Depot or Lowes, repair the one you bought with this great little pump.

RMW2.5G28-EZ-SX pump from Annovi Reverberi
RMW2.5G28-EZ-SX pump from Annovi Reverberi

Please be aware that this RMW2.5G28-EZ-SX pump from Annovi Reverberi is rotated  180 degrees, for mounting under your pressure washer.  Please see your units repair manual to determine if this is the correct mounting for your machine.

The RMW2.5G28-EZ-SX pump from Annovi Reverberi has the the following specifications:\
  • The unit is a Vertical Mount with Gas Flange 3-7 HP
  • Max. Volume on this pump is 2.5 GPM
  • Max. Discharge Pressure of this unit is 2,800 PSI
  • Max. Pump Speed on the RMW SX is 3,400 RPM
  • Shaft Diameter for mounting measures 7/8” Hollow
  • Built In unloader and chemical injector come standard on this pump
  • Built In easy start valve is also standard on this unit.
  • Maximum Horsepower Requirements to work this pump is 6.5 GHP
  • Inlet Port on the unit measures 3/4″ FGH (garden hose)
  • Outlet Port has a measurement of  22mm (Twist Connect)
  • Brass manifold for long life.
  • Stainless steel plungers built to make this pump last.
  • Pump comes filled with oil for quick step up and use.
  • Note: Engine shafts longer that 2” will require spacers or washers found at your local hardware store.
  • Weight of the SX pump is 7.7lb.
The RMW2.5G28-EZ-SX pump from Annovi Reverberi is not recommended to be repaired, as they are easier to replace both in time and money, however if you want to try your hand at DIYing it you can find the pump repair manual and breakdown by clicking here. Having trouble trying to figure out if this is the right unit for your big box store bought pressure washer from Home Depot of Lowes?  Give us a call and we will help you determine the correct replacement pump for your machine.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order? Place your order on our eCommerce store by clicking here.

As a bonus this pump does qualify for our everyday 5% off sale.  Just use the coupon code “5off” at check out to get 5% off your total order over $50.00

Posted on

Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI

The M407 Trigger Gun is a 7 gallon per minute at 4000 PSI spray attachment for your pressure washer.  Without a quality trigger gun your pressure washer is all but useless.

M407 TRIGGER GUN is one of the more versatile items on the market today, made with long lasting parts to give your pressure washer years of use.  It’s made from very durable plastic and metal parts and has the best internal pieces that are time tested and trusted by the pressure washing community.

Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI
Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI

The features of this Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI:

  • Maximum flow of this gun is 7 GPM
  • Maximum pressure on this unit is 4000 PSI
  • Maximum temperature that this gun can spray out is  250F.
  • Inlet port measures 3/8″ FPT
  • Outlet port has a measurement of  1/4″ FPT

Really not sure what type of gun you need for your pressure washer?  Or not sure if this rear entry spray gun will do the trick for you?  Give us a call toll free and we will be glad to assist you in picking out the right accessories for your pressure washing needs.  Call 1-877-824-7763 {Smart Phones Click to Call}

Or find your pressure washer parts breakdown here and see what the manufacturer recommend.

Ready to purchase the Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI, click here to go to our eCommerce store..

Purchase two of them, and not only do you have a back up, but then your purchase also qualifies for our everyday 5% off sale.  Just add the coupon code 5off to the coupon field at check out to get it.

Posted on

CAT Pumps – 8210 – Coupler Assembly

This blog is for a CAT Pumps – 8210 flex coupler assembly kit.  It has everything you need in it to reduce the space requirements needed for belt driven or gearbox assemblies.

The CAT Pumps – 8210 was designed by CAT to work with 145 TC motors with horse powers up to 3.  This assembly also eliminates the need for belt selection, sizing and adjusting to work properly.

CAT Pumps - 8210 - Coupler Assembly
CAT Pumps – 8210 – Coupler Assembly

CAT Pumps – 8210 – Coupler Assembly has the following specs:

  • Can adjust from 16.5 mm to 7/8″
  • The kits compact direct mounting feature reduces space required for belts or gearbox drive assemblies
  • This item insulates against heat transfer
  • Special urethane flexible spyder designed for extended life with high temperature and high RPM

Not sure if this coupler assembly is the correct reducing kit for your CAT Pump?  Give us a call toll free and a CAT Pump specialist will be happy to assist you with your unit.  We are here from 7:30 am to 4:00 pm M-F EST.  Call 1-877-824-7763 {Smart Phones Click to Call}

Want to try to determine yourself if this is the correct repair kit?  Find your CAT Pump on our breakdown / repair manual page here.

If you are sure the CAT Pumps – 8210 is correct for your pressure washer, you can order it here directly on our eCommerce store.

We may be able to get this unit to you at a better price! Call us before you order! Call 1-877-824-7763 {Smart Phones Click to Call}

The 8210 is priced above $50.00 making it orderable with our 5% off everyday sale at shopetsonline.com.  Just use code 5off at checkout to get an additional 5% off your subtotal.

Posted on

GIANT PUMPS – HR3025-111H – Triplex Ceramic Plunger Pump

The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps, that is made to be the replacement on your pressure washer that requires a 3 gallon per minute flow rate at a maximum pressure of 2500 PSI.

This HR3025-111H pump can pump water up to 80 degrees making it perfect for almost any cleaning situation you and your pressure washer get into.  Great for cutting grease and dirt from any surface.

HR3025-111H is a triplex ceramic plunger pump from Giant Pumps
HR3025-111H is a triplex ceramic plunger pump from Giant Pumps

The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps has the following specifications:

  • Volume on the HR3025-111H is 3.0 GPM
  • Maximum Discharge Pressure of the HR3025-111H is rated at 2500 PSI
  • Maximum Discharge Pressure (HR3030)  is 3000 PSI
  • Maximum Inlet Pressure is Up to 90 PSIG1
  • The RPM of the unit is 3450
  • Plunger Diameter measures at 16mm
  • Stroke of the pump is measured at 5.9mm (8.0 o angle)
  • The Crankcase Oil Capacity is 4.5 fl. oz.
  • Operating Temperature of Pumped Fluids Up to 80 F
  • Inlet Port on this pump measure 1 x 1/2″ NPT
  • The Discharge Ports measure 3/8″ NPT
  • Shaft Rotation is Clockwise
  • Weight of this unit is only 11.4 lbs.
  • Width of the overall pump is 6-7/16″
  • Height on this pump is 10-1/4″
  • Swash Plate Bore of the  HR3025-111H measures 3/4″x3/16″ Keyway
  • Swash Plate Bore of the (HR3030) measures 1″x3/16″ Keyway
  • Valves are made of Polyamide Plastic

Want to fix and already owned pump like this from Giant Pumps?  Go to our repair and breakdown manual page and find this unit or any Current Giant Pump on the market today, to see it’s repair parts and kits by clicking here.

Not sure if the HR3025-111H is the right pump for your machine? Give us a call and a Giant Pump Specialist will be glad to assist you with any questions.  We are here M – F 7:30 am till 4:00 PM EST.  Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order your replacement HR3025-111H pump today?  Click here and order it securely on our eCommerce site.

This unit does qualify for our everyday sale of 5% off $50.00 or more.  At checkout just add the coupon code “5off” into the coupon field to get and extra 5% off this unit, and anything else you order with it!

Posted on

Annovi Reverberi Replacement Pump RQV2.5G24D-EZ

The Annovi Reverberi Replacement Pump RQV2.5G24D-EZ which can also be identified as RQV25G24D-EZ is a horizontal type unit for a pressure washer that requires a flow rate of 2.5 gallons per minute with a maximum PSI rating of 2400.

This RQV2.5G24D-EZ pump spins at 3400 RPM connecting to a 3/4″ shaft and works on a gasoline powered engine. The pump has a built in chemical injection system as well as a pressure control valve.  The unit comes with an EZ start and thermal relief valve standard.

RQV2.5G24D-EZ
RQV2.5G24D-EZ

The RQV2.5G24D-EZ pump has the following Specifications:

  • A Max. Volume flow rate of 2.5 GPM
  • The Max. Discharge Pressure of 2,400 PSI
  • a Max. Pump Speed that spins 3,400 RPM
  • The Shaft Diameter that measures 3/4” Hollow
  • This pump has a Maximum Horsepower Requirement of 5.9 GHP
  • The Inlet Ports are 3/4″ GHA (garden hose)
  • With Outlet Ports that measure 22mm-14 (Twist Connect)
  • The pump weighs in at 6.5 lb.
The features of the RQV2.5G24D-EZ are as follows:
  • 3-Piston alternating volumetric pumps for use on cleaning units
  • Can be directly coupled to gas engine flange
  • Fits most homeowner type horizontal pressure washers
  • Horizontal Mount with Gas Flange 3-6 HP (2-9/16 center to center)
  • Pump body in die-cast aluminum alloy
  • Pistons driven by swash plate mechanism
  • Two bearing systems, to support the pump shaft and pistons
  • Pistons in hardened and tempered steel
  • Pump head in aluminum
  • Intake valves fitted above the pistons for greater efficiency
  • Integral regulating valve
  • Integral detergent suction system
Already own a RQV2.5G24D-EZ pump and want to fix it. Click here to find the parts breakdown / repair manual.

Not , sure if this is the correct pump for your pressure washer? Give us a call toll free and an Annovi Reverberi Pump specialist will be glad to help you out.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to get back up and running?  Order the pump here on our eCommerce site.

This pump does qualify for our everyday special of 5% off $50.00 or more.  Simply put the code “5off” in the coupon field at check out and you will get the discount.

Posted on

LANDA Part # 8.711-293.0 Soap Nozzle Wand.

The LANDA Part # 8.711-293.0 Soap Nozzle Wand, is specifically designed to work with most LANDA pressure washers past and present.  It is the perfect pressure washer accessory to make your cleaning jobs go smooth and easy, with or with out soap or chemical.

8.711-293.0 is a wand replacement, that will withstand any cleaning situation you can think of to test it.  It connects quickly and easily  to your LANDA hot or cold pressure washer.

 

8.711-293.0 soap wand for Landa
8.711-293.0 soap wand for Landa

Not sure if the 8.711-293.0 soap wand for Landa is the right item for your machine?  Give us a call toll free and a LANDA specialist will help you determine the right wand for your unit to get you back up and running fast.  Call 1-877-824-7763 {Smart Phones Click to Call}

 

You can also check our LANDA repair / parts breakdown manuals to see if this is the correct replacement wand for your pressure washer by clicking here and finding your units manual.

Ready to order the 8.711-293.0? Do so, easily and safety online at our eCommerce store by clicking here.

Also don’t forget all orders at shopETSonline.com that are over $50.00 are available for a discount.  If your order is over $50.00 use the coupon code “5off” at check out to get 5% off!

Posted on

AR1864 Valve Repair Kit for Annovi Reverberi Pumps

AR1864 is a valve repair kit made by Annovi Reverberi for repairing its XM, XT and HPE line of pressure washer pumps. The kit comes complete with everything that you need to DYI and repair the 6 valves on one of these pumps.

The AR1864 valve repair kit is also used in repairing XMV3G32 series of pump, found in AR North Americas Pump Package XMV3G32-PKG.  Best thing about this kit is you only need one of them per pump, it comes with everything to replace the valves that are leaking or broken.

AR1864 Valve Repair Kit
AR1864 Valve Repair Kit

The AR1864 Valve Repair Kit comes with the following items:

  • A quantity of six valves.
  • The six o-rings you will need to re-seat the valves.
Not sure if you own a pump that this kit is used on? Find your pumps repair / breakdown manual by searching here for it and then seeing if the AR1864 Valve Repair Kit is on it.

Still can’t determine if this repair kit is the one that will get you up and running fast?  Give one of our Annovi Reverberi pump specialists a call and they will help you determine the correct repair kit.  Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to place that order for the AR1864 Valve Repair Kit? Do so easily and securely by clicking here to order it hassle free on our eCommerce site.

Also, don’t forget that all orders over $50.00 can have a coupon code added at checkout by you to receive an additional 5% off!  Just use code 5off when on checkout page to have the discount apply.

Posted on

RMV2.5G30D pump from Annovi Reverberi

RMV2.5G30D replacement pressure washer pump from Annovi Reverberi.  This pump is for repair of pressure washers that  have a flow rate of 2.5 gallons per minute and a maximum rating of 3000 PSI.  The unit spins at a industry standard of 3400 RPM.

The RMV2.5G30D can connect to a direct drive system of a gas powered pressure washer that has a mounting shaft size of 3/4″. The pump is equipped with a built in chemical injector and has an installed pressure control valve all standard, making it the perfect replacement pump for most home pressure washers on the marked today.

RMV2.5G30D replacement pressure washer pump
RMV2.5G30D replacement pressure washer pump

 

The Rmv2.5G30D has the following specifications:

  • The pump features a 3/4″ hollow shaft and operates at 3400 RPM, with a max PSI of 3000.
  • This unit has a Max Flow (in GPM) of  2.5
  • The Max Flow (in L/Min) is 9.5
  • The pump has a Max Bar of 200
  • Power of this unit in EBHP is rated at 4.3
  • This pump has a Bore Diameter of 12mm
  • Stroke on this unit is  9.7mm
  • Crankshaft has an ID Stamp of 1
Check your pressure washer, you might already have an RMV2.5G30D installed on it.  If this is the case and it has stopped working you may be able to repair this pump yourself.  You can find the pumps breakdown / repair manual by clicking here.  Or if you are not sure if this is the pump you have installed but want to try to fix it before you replace it you can find all the Annovi Reverberi Pump Breakdowns / Repair Manuals here.
Still not sure if you own or even can use a RMV2.5G30D pump?  Just give us a call and we will be more than happy to assist you in figuring out what you have and what will work best for your pressure washer. Call us toll free at Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order? Do so by clicking here to order securely on our eCommerce site.  Don’t for get to use coupon code 5off at checkout on all orders over $50.00 to get an additional 5% off!!

Posted on

Annovi Reverberi AR1265890 Inlet By Pass Adapter

AR1265890 is the Inlet by-pass adapter made by Annovi Reverberi and AR North America for most of it’s pumps.  It can also be written or seen as AR 1265890.

This AR1265890 adapter is made of solid black plastic and is a durable and cheap replacement if your pressure washer pump has stopped working.  It’s one of the first things you should check as it can fail easily, but is also easily replaced.

AR1265890 By-Pass Adapter

Not sure if this item is the correct fix for your Annovi Reverberi pump? Feel free to give us a quick call and we will help you determine if the AR1265890 By-Pass Adapter will work on your machine.  Call 1-877-824-7763

You can also find your pumps breakdown / repair manual here and determine yourself if this is the right repair part for your needs.

If your sure this is the correct inlet adapter for your pressure washers pump then you can order it directly and securly on our eCommerce site by clicking here: AR1265890

Posted on

Annovi Reverberi Kit – AR2544 – PISTON SET Kit

This blog is for the piston repair kit AR2544 also known as AR 2544 from Annovi Reverberi.  This kit is used to repair the pistons on the XM, XMV and XMA series of pumps from AR North America.

 

This AR2544 or AR 2544 is one of the first items you can look at to repair your pump for your pressure washer should it stop pumping.  And fixing these will get you back up and running fast.

 

AR2544 / AR 2544 Piston Repair Kit.
AR2544 / AR 2544 Piston Repair Kit.

 

This AR2544 / AR 2544 Piston Repair Kit contains the following items:

  • 3  of part number AR480480 which is the O-Ring that measures 14 x 1.78
  • 3 of part number AR1260091 which is a Washer / Slinger made of Brass
  • 3 of part number AR1780070 the Plunger made for solid Ceramic
  • 3 of part number AR1260100  which is the Piston Washer
  • 3 of part number AR1260110 which is the Nut that measures an M8
Need help determining if the AR2544 / AR 2544 Piston Repair Kit is the correct item for your pump?  Click here to find your pumps breakdown / repair manual to see if this is the exact part number you need.
If you have found your pumps repair manual and are still not sure if the AR2544 / AR 2544 kit is correct for you, please give us a call and we will be happy to help you determine the correct pistons for your pump on your pressure washer. Call 1-877-824-7763

Ready to order the Piston Repair Kit? Click here to order securely on our eCommerce site.