AR1864 Valve Repair Kit for Annovi Reverberi Pumps

AR1864 is a valve repair kit made by Annovi Reverberi for repairing its XM, XT and HPE line of pressure washer pumps. The kit comes complete with everything that you need to DYI and repair the 6 valves on one of these pumps.

The AR1864 valve repair kit is also used in repairing XMV3G32 series of pump, found in AR North Americas Pump Package XMV3G32-PKG. Best thing about this kit is you only need one of them per pump, it comes with everything to replace the valves that are leaking or broken.

The AR1864 Valve Repair Kit comes with the following items:

A quantity of six valves.
The six o-rings you will need to re-seat the valves.

Not sure if you own a pump that this kit is used on? Find your pumps repair / breakdown manual by searching here for it and then seeing if the AR1864 Valve Repair Kit is on it.

Still can’t determine if this repair kit is the one that will get you up and running fast? Give one of our Annovi Reverberi pump specialists a call and they will help you determine the correct repair kit. Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to place that order for the AR1864 Valve Repair Kit? Do so easily and securely by clicking here to order it hassle free on our eCommerce site.

Also, don’t forget that all orders over $50.00 can have a coupon code added at checkout by you to receive an additional 5% off! Just use code 5off when on checkout page to have the discount apply.

September 14, 2017

RMV2.5G30D pump from Annovi Reverberi

RMV2.5G30D replacement pressure washer pump from Annovi Reverberi. This pump is for repair of pressure washers that have a flow rate of 2.5 gallons per minute and a maximum rating of 3000 PSI. The unit spins at a industry standard of 3400 RPM.

The RMV2.5G30D can connect to a direct drive system of a gas powered pressure washer that has a mounting shaft size of 3/4″. The pump is equipped with a built in chemical injector and has an installed pressure control valve all standard, making it the perfect replacement pump for most home pressure washers on the marked today.

RMV2.5G30D replacement pressure washer pump

The Rmv2.5G30D has the following specifications:

The pump features a 3/4″ hollow shaft and operates at 3400 RPM, with a max PSI of 3000.
This unit has a Max Flow (in GPM) of 2.5
The Max Flow (in L/Min) is 9.5
The pump has a Max Bar of 200
Power of this unit in EBHP is rated at 4.3
This pump has a Bore Diameter of 12mm
Stroke on this unit is 9.7mm
Crankshaft has an ID Stamp of 1

Check your pressure washer, you might already have an RMV2.5G30D installed on it. If this is the case and it has stopped working you may be able to repair this pump yourself. You can find the pumps breakdown / repair manual by clicking here. Or if you are not sure if this is the pump you have installed but want to try to fix it before you replace it you can find all the Annovi Reverberi Pump Breakdowns / Repair Manuals here.

Still not sure if you own or even can use a RMV2.5G30D pump? Just give us a call and we will be more than happy to assist you in figuring out what you have and what will work best for your pressure washer. Call us toll free at Call 1-877-824-7763 {Smart Phones Click to Call}

Ready to order? Do so by clicking here to order securely on our eCommerce site. Don’t for get to use coupon code 5off at checkout on all orders over $50.00 to get an additional 5% off!!

September 7, 2017

Annovi Reverberi AR1265890 Inlet By Pass Adapter

AR1265890 is the Inlet by-pass adapter made by Annovi Reverberi and AR North America for most of it’s pumps. It can also be written or seen as AR 1265890.

This AR1265890 adapter is made of solid black plastic and is a durable and cheap replacement if your pressure washer pump has stopped working. It’s one of the first things you should check as it can fail easily, but is also easily replaced.

AR1265890 By-Pass Adapter

Not sure if this item is the correct fix for your Annovi Reverberi pump? Feel free to give us a quick call and we will help you determine if the AR1265890 By-Pass Adapter will work on your machine. Call 1-877-824-7763

You can also find your pumps breakdown / repair manual here and determine yourself if this is the right repair part for your needs.

If your sure this is the correct inlet adapter for your pressure washers pump then you can order it directly and securly on our eCommerce site by clicking here: AR1265890

September 6, 2017

Annovi Reverberi Kit – AR2544 – PISTON SET Kit

This blog is for the piston repair kit AR2544 also known as AR 2544 from Annovi Reverberi. This kit is used to repair the pistons on the XM, XMV and XMA series of pumps from AR North America.

This AR2544 or AR 2544 is one of the first items you can look at to repair your pump for your pressure washer should it stop pumping. And fixing these will get you back up and running fast.

This AR2544 / AR 2544 Piston Repair Kit contains the following items:

3 of part number AR480480 which is the O-Ring that measures 14 x 1.78
3 of part number AR1260091 which is a Washer / Slinger made of Brass
3 of part number AR1780070 the Plunger made for solid Ceramic
3 of part number AR1260100 which is the Piston Washer
3 of part number AR1260110 which is the Nut that measures an M8

Need help determining if the AR2544 / AR 2544 Piston Repair Kit is the correct item for your pump? Click here to find your pumps breakdown / repair manual to see if this is the exact part number you need.

If you have found your pumps repair manual and are still not sure if the AR2544 / AR 2544 kit is correct for you, please give us a call and we will be happy to help you determine the correct pistons for your pump on your pressure washer. Call 1-877-824-7763

Ready to order the Piston Repair Kit? Click here to order securely on our eCommerce site.

September 1, 2017

Comet Pumps – 6305.1800.00 PUMP also called the ZWD 4035 G

This is information for the Comet Pump 6305.1800.00 PUMP also called the ZWD 4035 G. This pump is for pressure washers that have a flow rate of 4.0 GPM and a maximum pressure of 3500 PSI. This unit is for machines that spin at 3400 RPM.

The 6305.1800.00 PUMP also called the ZWD 4035 G is a replacement pressure washer pump that mounts to a gas engine and has a reversible crankshaft that allows it to be connected to either a right or left hand mounting system.

6305.1800.00 PUMP also called the ZWD 4035 G has the following specifications:

The zwd 4035 G has a Maximum Volume of 4.0 gpm
This pump has a Max. Discharge Pressure of 3500 psi
6305.1800.00 also has a Maximum Pump Speed 3400 rpm
The Inlet Port Thread of this pump is 1/2 FPT
This unit has a Discharge Port Thread of 3/8 FPT
The zwd 4035 G has a Shaft Diameter of 1″ and is Hollow
Pistons on the 6305.1800.00 are 15mm
Weight of this unit is 16.5 lbs.

Some other features of the 6305.1800.00 PUMP also called the ZWD 4035 G are that the unit has:

1/2 FPT Inlet — 3/8 FPT Discharge
Anodized, Die-Cast Aluminum Crankcase
Solid Ceramic Plungers
Stainless Steel Check Valves
Buna-Textile V-Packings

If your pressure washers pump has stopped working and you need a new one with the above specifications this 6305.1800.00 PUMP also called the ZWD 4035 G is a very good and reliable pump to purchase. If you are not sure if this unit is correct or will work on your machine, give us a call and we will be happy to help you figure out the best item to get you back up and pressure washing fast. Call 1-877-824-7763

Do you already own a 6305.1800.00 PUMP also called the ZWD 4035 G? And need to repair it? Just click here to get the breakdown / repair manual for your unit.

Want to order this unit just click here and you can order it securely on our e-commerce site.

August 30, 2017

General Pump Kit – 52040009 Ceramic Plunger

Part number 52040009 is a ceramic plunger repair part from General Pumps. While it is called a kit, it is basically 1 plunger, and you will need to order 1 kit for every plunger your pressure washer pump has damaged.

The 5204009 is used on many different general pump units. That include, but is not limited to the following pumps: EZ2545E, EZ3030G34, EZ3035G, EZ3040G, EZ3040S, EZ3045G, TT9351, TT9441, TX1508G8, TX1510G8, TX1510S34. It may also be used on many more, to see if it is used on your unit find your breakdown / repair manual here.

General Pump Kit - 52040009 Ceramic Plunger — General Pump Kit – 52040009 Ceramic Plunger

If after looking up your pump above on our breakdown / repair manual page for General Pumps you can still not determine if the 52040009 Ceramic Plunger kit is the correct plunger for your pressure washer pump, please give us a call and our General Pump Specialist will be able to assist you in getting the correct part to get you up and running fast. Call 1-877-824-7763

Need more than plungers for your General Pump? We have you covered there too. Any part you find that needs to be repaired, we can get for you. Just find the part number on your pumps breakdown / repair manual and put it in the search bar on our e-commerce page and add it to your cart along with the correct number of 52040009 plungers you need by clicking here. The search bar will be in the upper left hand corner of the page. Repairing your pump almost always is cheaper than getting a brand new one, especially when it comes to General Pumps.

Don’t need any other parts to get your pressure washer up and working for you then simply click here to order the 52040009 ceramic plunger kit today!

Save

August 28, 2017

Annovi Reverberi RMW22G24-PKG replacement pump package.

This blog is for the RMW22G24-PKG, from Annovi Reverberi. It’s a pump package built to be your replacement unit for your pressure washer that needs to have a flow rate of 2 gallons per minute with a maximum PSI of 2400. This pump runs at 3400 RPM, which is the industry standard.

The RMW22G24-PKG was put together by Annovi Reveberi, so home owners and contractors alike could fix their pressure washers quickly and easily with out having to order a bunch of separate parts. This pump package has everything you need in it to replace your units pump and get back up and running fast.

RMW22G24-PKG pump package from Annovi Reverberi

RMW22G24-PKG has the following specifications:

Max GPM 2
Max PSI 2400
RPM 3400
Shaft Size 7/8″
Pump RMW22G24-EZ
Flange Vertical Gas Engine Flange
Thermal Relief Valve TPP140-1/4A
Detergent Tube w/Filter AR1269120
Applications EZ Start Valve

If you are not sure if the RMW22G24-PKG is the correct kit for your pressure washer, you can give us a call Monday – Friday EST 7:30 am until 4:00 pm and one of our Annovi Reverberi pump specialists will be glad to assist you with any questions you may have. Call 1-877-824-7763

On the contrary, if you already own a RMW22G24-PKG and need to repair it we have you covered there too. You can find your units parts breakdown / repair manual here and get all the repair parts you may need to save you time and money of replacing the entire pump. Not sure if you have and RMW pump? Click here to see all out breakdowns for AR pumps and find the one you need.

This kit comes with the following Annovi Reveberi items:

RMW22G24D (also know as RMW2.2G24D) – Pump
TPP140-1/4A – Thermal Relief Valve
AR1269120 – Detergent Tube with Filter

Ready to order? Just give this link a click and you can order the pump securely on our e-commerce site. RMW22G24-PKG

Save

August 25, 2017

LANDA Pump 8.921-713.0 rated 6 GPM at 3600 PSI

The LANDA Pump with a part number of 8.921-713.0 is a replacement unit for LANDA Pressure washers that use a pump with a flow rate of 6 gallons per minute and a maximum output pressure of 3600 PSI. The unit spins at the industry standard of 1450 RPM.

This 8.921-713.0 pump is an original OEM unit made specifically for their pressure washers, and is the first choice when your machine stops building pressure to pump.

Some technical specifications on this 8.921-713.0 pump are:

The unit has a flow rate of 6 GPM.
This pump has a maximum PSI of 3600.
The rpm of this unit is 1450.

A few more details about the 8.921-713.0 are:

Landa’s unique design that delivers the same performance as other pumps but at 10% lower RPM.
10% lower RPM than comparable pumps
Durable ceramic plunger with mirror finish
Unique snug-fit design for heavy-duty valves
Stronger crankcase with cooling fins and thicker mounting feet
Extra-large European made tapered roller bearings for longer life
Larger oil level sight glass
Specially die cast connecting rods for quieter operation and longer pump life
U-seals which allow for up to 185°F inlet water for hot water cleaning, significantly reduce pump maintenance and extend pump life
Tighter piston rod tolerance for reducing wear and maximizing performance
Multi-viscosity pump oil for better lubrication and cooler operation
New and improved check valves for quieter operation and longer valve life

As always, if you’re not sure if this is the correct unit for your machine, you can give us a call and we will be happy to assist you in figuring out if this is the correct item to get you up and running fast. Call 1-877-824-7763

You can also check your pressure washers manual here to determine if the pump is the one needed for your pressure washer by finding the breakdown / repair manual of your unit here.

If you are sure this is the correct pump you can order it fast and easily by clicking here: 8.921-713.0

August 24, 2017

XTV2G15EBA-F8 pump from Annovi Reverberi for your pressure washer.

The XTV2G15EBA-F8 is a replacement pump from Annovi Reverberi for your pressure washer that requires as flow rate of 2.11 gallons per minute with a maximum pressure of 1500 PSI. This unit has an RPM of 3400 and is made to mount on pressure washers with a 5/8″ standard type shaft.

Our XTV2G15EBA-F8 pump has a head forged from solid brass and has a body made from die-cast metals, making it a durable and dependable replacement for your current pressure washer.

Some technical specification of the XTV2G15EBA-F8 Pump are:

Max GPM – 2.11
Max LMP – 8
Max PSI – 1500
Max Bar – 103
Power EBHP – 2
Bore Dia. mm – 15
Stroke mm – 4.8
Weight Lbs – 10
Max Temp – 140°
Oil Capacity – 8oz
Inlet Thread – 1/2”F
Discharge Thread – 3/8”F

After reading all of the above, if you are not sure if this is the correct pump for your machine you can give us a call toll free and our Annovi Reverberi Pump specialists will be happy to assist you in determining if the XTV2G15EBA-F8 is right for you. Call 1-877-824-7763

Already own a XTV2G15EBA-F8 for your pressure washer and it has stopped working? Try fixing it yourself first with repair kits and parts. To find all the parts and kits available for fixing this pump you can click here. Not sure if this is your actual pump, then click here to find out which pump you have and view it’s breakdown / repair manual.

If you are sure this unit will get you up and running then you can order it securely on our site by clicking here.

August 22, 2017

Annovi Reverberi Unloader VRT3-160 for your Pressure Washer Pump

This is a blog for the Annovi Reverberi Unloader VRT3-160 for your Pressure Washer Pump. The unloader is a vital piece of equipment to protect you more expensive pump and machine from building up too much pressure. This item is considered a fail safe and is less costly replace than a blown pump.

The VRT3-160 unloader will replace most unloaders that have a maximum PSI of 2320. This pressure washer accessory also replaces older units like the AL605Y, AL605 and AL605X all of which are now obsolete.

The specifications of the VRT3-160 are as follows:

The unloader has an Over sized handle for easier adjustment.
This unit is made with a forged valve body for excellent strength.
The VRT3-160 has two inlet ports standard.
The item also has two by-pass ports also standard.
The unloaders ultra thick inlet and discharge ports are formed for added strength to the units PSI rating.
This items color coded springs and caps are done so for easy valve identification.
All the ports on the unloader are FNPT.

A few more technical specifications of the VRT3-160 unloader are:

• The unloaders internal construction are designed for a more efficient flow and operation.
• A set of dual locking nuts help with vibration resistant for setting maximum pressures of the unit.
• VRT3-160 has newer spring material making it more resistant to fatigue and its powder paint resists rusting.
• The pistons are made of a larger diameter to add more strength and contact area for shifting alignment.

If you already own a VRT3-160 unloader and want to try to repair it, you can find the breakdown and repair manual here. If you’re not sure what unit you have installed on your pressure washers pump click here to find a list of other Annovi Reverberi unloaders and pumps.

Still not sure if this unit is the correct protection for your pressure washer and it’s pump? Give one of our pump specialists a call and we will be glad to assist you in figuring out what is the right item for your unit.

Call 1-877-824-7763

Or if this is just a simple replacement and you know that this is the correct unloader for your pump, you can order it securely on our e-commerce site by clicking here: VRT3-160