CAT Pressure Washer 25 Frame Piston Pump:
Standard Brass Models 1520,2520
Stainless Steel Models 1521,2521
Pulse Pump Manifold Models 1525,2525
Hi-Temp Model 2520C
CAT Pressure Washer Pump 2520 FEATURES:
•Superior Design
•Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
•Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
•Mechanically actuated inlet valves give strong lift and easy prime.
•304 stainless steel flat valve design offers positive seating and greater suction capabilities.
•Oil bath crankcase assures optimum lubrication.
Quality Materials used in the 2520 CAT Pressure Washer Pump are:
•Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
•Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
•Special high strength TNM connecting rods offer superior bearing quality strength.
•Chrome-moly crankshaft gives unmatched strength and surface hardness.
•Oversized crankshaft bearings with greater loading capacity mean longer bearing life.
The CAT 2520 Pressure Washer Pump has Easy Maintenance:
•Stepped stainless steel piston rod and with chrome-plated, stainless steel sleeve allows easy replacement from front of pump.
•All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
•Wear parts are available in convenient kits.
CAT Pressure Washer MODEL 2520, 2521, 2525 and 2520C Specifications:
Flow ……………………………………………………………..25 GPM (95 L/M)
Pressure Range ……………………………………100 to 800 PSI (7 to 55 BAR)
RPM……………………………………………………………772 RPM (772 RPM)
Bore ………………………………………………………………..1.490″ (38 mm)
Inlet Pressure Range ………………………Flooded to +40 PSI (Flooded to +2.8 BAR)
Maximum Liquid Temperature……………………………..210°F (98°C)
Flushing Ports (2) ………………………………………..1/4″ NPTF (1/4″ NPTF)
Dimensions ………………………………………21.42 x 15.04 x 7.8″ (544 x 382 x 198 mm)
Stroke ……………………………………………………………..1.417″ (36 mm)
Inlet Pressure Range ……………………………–8.5 to +40 PSI (–0.6 to +2.8 BAR)
Crankcase Capacity …………………………………………..84 oz. (2.5 L)
Maximum Liquid Temperature……………………………..160°F (71°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Inlet Ports (1)……………………………………………1-1/4″ NPTF (1-1/4″ NPTF)
Discharge Ports (3) ………………………………………..1″ NPTF (1″ NPTF)
Pulley Mounting ………………………………………….Either side (Either side)
Shaft Diameters ………………………………………………..1.181″ (30 mm)
Weight ………………………………………………………….69.3 lbs. (31.5 kg)
Dimensions…………………………………….21.62 x 15.04 x 7.8″ (549.15 x 382 x 198 mm)
CAT Pressure Washer Pump Breakdown for 2520 Click Here.
CAT 2520 Pressure Washer Pump Repair Manual Click Here.
Call 1-877-824-7763 {Smart Phones Click to Call} for pricing and availability on this CAT Pressure Washer Pump: 2520
