CAT Pressure Washer Pump 1050
CAT 1050 15PFR PUMP 10GPM 2200PSI 958RPM
CAT Pressure Washer Pump 1050 Parts Breakdown PDF –> 
CAT Pressure Washer Pump 1050 Service Manual–> 
CAT Pressure Washer Pump 1050
The CAT Pressure Washer Pump 1050 Features:
- Triplex plunger design provides smoother liquid flow.
- V-Packings are completely lubricated and cooled by the liquid being pumped.
- Special ported inlet manifold permits an external flush liquid providing cooling for hi-temp liquids and lubrication for low lubricity liquids.
- Lubricated Lo-Pressure Seals provide double protection against external leakage.
- Oil bath crankcase assures optimum lubrication.
- Close tolerance concentricity of the ceramic plunger offers perfect alignment and maximizes seal life.
- Precision design 304 and 316 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life.
- Brass, Stainless Steel, Duplex SS or Nickel Aluminum Bronze manifolds for strength and corrosion resistance.
- Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
- Specially formulated, CAT PUMP exclusive, V-Packings offers unmatched performance and seal life.
- Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
- Chrome-moly crankshaft gives unmatched strength and surface hardness.
- Oversized crankshaft bearings with greater loading capacity mean longer bearing life.
- Wet-end easily serviced without entering crankcase.
- Valve assemblies are accessible without disturbing piping.
- Interchangeable inlet and discharge valve assemblies.
- Preset seals require no packing adjustment.
The CAT Pressure Washer Pump 1050 has the following technical specifications:
- Flow………………………………………………………….. 10 gpm (38 l/m)
- Pressure Range………………………………. 100 to 2200 psi (7 to 155 bar)
- RPM……………………………………………………….. 958 RPM (958 RPM)
- Inlet Pressure Range…………………………….. –5 to 60 psi (–0.35 to 4 bar)
- Maximum Liquid Temperature ………………………..160°F (70°C)
- Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
- Alternate Specifications – Model 1050 Only
- Flow*…………………………………………………………. 12 gpm (45 l/m)
- Pressure Range*………………………………100 to 1800 psi (7 to 125 bar)
- RPM*……………………………………………………. 1150 RPM (1150 RPM)
- Inlet Pressure Range* ……………………………20 to 60 psi (1.4 to 4 bar)
- Maximum Liquid Temperature*………………………..100°F (38°C)
- *C.A.T. Required
- Bore…………………………………………………………….0.945” (24 mm)
- Stroke………………………………………………………….1.180” (30 mm)
- Crankcase Capacity……………………………………….42 oz. (1.26 l)
- Inlet Ports (2)…………………………………………..3/4” NPTF (3/4” NPTF)
- Flushing Ports (2) (1051C)…………………………1/8” NPTF (1/8” NPTF)
- Discharge Ports (2)…………………………………..1/2” NPTF (1/2” NPTF)
- Pulley Mounting……………………………………… Either Side (Either Side)
- Shaft Diameter………………………………………………1.181” (30 mm)
- Weight…………………………………………………………44 lbs. (20 kg)
- Dimensions………………………………16.28 x 12.99 x 6.44” (414 x 330 x 164 mm)
List Price: $3,297.68
Our Price: $2,537.56 
You save $760.12!
Product Code: BAPL-5715 ( CAT Pressure Washer Pump 1050 )
PRICE SUBJECT TO CHANGE. PRICE VALID 10/25/2011
