LANDA – CAT PUMP 430 – 4 Frame Piston Pressure Washer Pump, Standard Brass Models – 8.702-423.0
The CAT PUMP 430 Features:
- Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
- Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
- Mechanically actuated inlet valves give strong lift and easy prime.
- 304 stainless steel discharge valves on the CAT PUMP 430 for wear resistance.
- Oil bath crankcase assures optimum lubrication.
- 100% wetted seal design allows pumped liquid to cool and lubricate for longer life of the CAT PUMP 430.
- Quality Materials
- Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance on the CAT PUMP 430.
- Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
- The CAT PUMP 430 has Special high strength TNM connecting rods offer superior bearing quality strength.
- Chrome-moly crankshaft gives unmatched strength and surface hardness.
- Oversized crankshaft bearings with greater loading capacity mean longer bearing life on the CAT PUMP 430.
- Easy Maintenance
- Stepped stainless steel piston rod with chrome-plated, stainless steel sleeve allows easy replacement from front of CAT PUMP 430.
- All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
- Wear parts are available in convenient kits for this CAT PUMP 430.
The CAT PUMP 430 Technical Specification are:
- Flow …………………………………………………………..5.0 GPM (19 L/M)
- Pressure Range ………………………………..100 to 1000 PSI (7 to 70 BAR)
- RPM………………………………………………………..1040 RPM (1040 RPM)
- Bore ………………………………………………………………0.787″ (20 mm)
- Stroke ……………………………………………………………0.768″ (19.5 mm)
- Crankcase Capacity …………………………………………21 oz. (0.6 L)
- Maximum Liquid Temperature……………………………..160° (71°C)
- Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
- Inlet Pressure Range …………………………– 8.5 to +40 PSI (– 0.6 to +2.8 BAR)
- Inlet Ports (1)…………………………………………….1/2″ NPTF (1/2″ NPTF)
- Auxiliary Port (1)………………………………………..1/4″ NPTF (1/4″ NPTF)
- Discharge Ports (2) ……………………………………3/8″ NPTF (3/8″ NPTF)
- (1) ……………………………………1/2″ NPTF (1/2″ NPTF)
- Pulley Mounting………………………………………..Either Side (Either Side)
- Shaft Diameter………………………………………………. 0.650″ (16.5 mm)
- Weight ………………………………………………………..17.7 lbs. (8.0 kg)
- Dimensions……………………………………12.56 x 8.8 x 5.33″ (319 x 223 x 135.5mm)
CAT PUMP 430
| CAT Pump 430 |  Data Sheet for the CAT Pump 430 |
 Service Manual for the Cat Pump 430 |
Cat Pump 430 exploded view
List Price: $1,850.38
Our Price: $1,386.74 
You save $463.64!
Availability:: available for order
Product Code: LAN-8.702-423.0
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CAT PUMP 430 11/09/2011
