AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pump 4 GPM @ 3700 PSI
ETS BOLT-N-GO RKV4G37D-F24 PUMP PACKAGE SPECIAL!
EACH RKV4G37D-F24 PUMP PACKAGE COMES INDIVIDUALLY PACKAGED, BRAND NEW – FACTORY TESTED! THIS PACKAGE CONSISTS OF ONE RKV4G37 3400 RPM D VERSION 1” (WITH GAS ENGINE FLANGE) PUMP WITH BOLT-ON STYLE UNLOADER (EITHER MINI-MATIC, GYMATIC OR VR35), THERMAL RELIEF VALVE (AKA PUMP GUARD), GARDEN HOSE THREAD & FILTER AND 3/8 IN. PLUG OUTLET.
AND DON’T FORGET FREE SHIPPING! (WITHIN CONTINENTAL UNITED STATES)
PARTS LIST: RKV 3400 rpm
AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Plunger Pumps are designed for a wide variety of high pressure washing applications. The AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pump is constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
The AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pump Features:
- Manifold:
- – Forged Brass: Strength and no porosity – long life. higher hydrostatic pressures – safety, performance.
- – Inlet and Discharge Ports: Heavy bosses for added strength.
- – Offset Discharge Ports: High efficiency, smooth flow.
- – Bolts: Eight bolts, 8mm, grade 8.8.
- Valves:
- – Valve Caps: Stainless steel on pumps rated at 3200 PSI and higher, better hydrostatic loads. Machined brass on pumps <3200 PSI.
- – Ultra Form Cages: Durable, strength, and long life.
- – Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Packing and Plungers:
- – High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- – Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- – Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- – Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
- Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
- Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
- Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
- Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
- Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
- Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
- Connecting Rods: One-piece special allow aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
- Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
- Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
- Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
- Oil Capacity: 15.5 oz.
- Dyno Proven: All RKV4G37D-F24 pumps are dyno tested to assure the theoretical design meets the actual design.
- Valve Design: Each RKV4G37D-F24 pump series has a valve design that optimizes its highest efficiency.
RKV4G37D-F24 Pressure Washer Pump
The AR Annovi Reverberi RKV4G37D-F24 Pressure Washer Pump has the following specifications:
- Maximum volume: 4 GPM
- Maximum discharge pressure: 3700 PSI
- Horsepower: 9.75 GHP
- Maximum pump speed: 3400 RPM
- Hollow shaft I.D: 1″
- Bore: 18mm
- Stroke: 7.0 mm
- Inlet port thread: 1/2″ FPT
- Discharge port thread: 3/8″ FPT
- Maximum fluid temperature: 140 F.
- Crankcase oil capacity: 15 oz
- Crankshaft ID stamp: 8
- Weight: 21 lbs.
RKV4G37D-F24 Pressure Washer Pump
List Price: $1,047.54
Our Price: $474.06 
You save $573.48!
Availability:: available for order
Product Code: ARWP-RTR-RKV4G37D
Annovi Reverberi Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE ON THIS rkv4g37d-f24 VALID 11/16/2011
