SLX – The Only Portable Hot Water Pressure Washer that Delivers 200°F Cleaning at up to 10 GPM!
•Dual-Gun Ready
•Powered by Gasoline
•Diesel; Diesel-Heated
•Belt-Drive Landa Pump with 7-Year Warranty
•3/4″ Schedule 80 Coil
The LANDA SLX Series Pressure Washer has the following:
•Pre-plumbed with 3-Way Valve to bypass float tank when drawing water directly from an auxiliary tank.
•Extra-large Heating Coil made of cold-rolled, 3/4″ Schedule 80 steel pipe with 5-year warranty; features Stainless Steel Top Wrap; unique lift-out design for easy and quick Coil Access.
•Rugged 2″ x 4″ x 1/8″ thick box steel frame, with compact footprint, shields key components; further protected by weather-resistant Epoxy Powder Coat finish; Power Platform is vibration isolated to minimize frame stress.
•Water-resistant, metal Control Panel has adjustable thermostat, combination hour meter and tachometer, volt meter, burner switch and tri-lingual operating instructions for added safety.
•Industrial-duty tri-plunger Landa Pump designed to run at low RPM for long life, 7-year warranty, with single-rail true-track Pulley Adjustment.
•Adjustable Detergent and Steam Valves provide precise metering of soap and on-demand wet-steam cleaning.
•Illustrated Warning Labels universally understandable for liability protection.
•Gasoline-powered Vanguard and Honda Engines, or watercooled, 16‑27 hp diesel Kohler Engine all come with keyed electric starter for easy start-up and protection against unauthorized use; polyurethane Battery Box with vibration isolators protects and firmly secures battery (battery not included).
•30‑gallon diesel and 16‑gallon gasoline Fuel Tanks (15‑gallon diesel and 10‑gallon gasoline on SLT) provide hours of uninterrupted operation; with elevated fuel lines to avoid suctioning of settled debris.
•50 ft. of double-wire braid High Pressure Hose rated for up to 6000 PSI and featuring a 24-inch safety hose guard for operator burst protection.
•Efficient 2,000-Watt Generator produces reliable power for burner.
•High-efficiency Burner, with dual rings for “dialing in” air flow, has a Fuel- Water Separator for fuel pump protection.
•Many Safety Features, including a rupture disk, thermal pump protector, flow switch, unloader valve, and safety lock on the trigger gun.
•Corrosion-resistant Float Tank has stainless steel inlet filter and 3/4″ float valve with anti-siphon backflow protection; also allows for introduction of detergents in high pressure mode.
•Insulated, fatigue-free Trigger Gun, with swivel crimp fitting for a tangle-free hose. Stainless steel, dual-lance Variable Pressure Wand features an ergonomic design and easy adjusting of the water pressure while cleaning.
WHY CHOOSE LANDA’s SLX or SLT
When it comes to heavy-duty grease or grime, most high-volume, hot water pressure washers fall short with their 150°F water. Landa’s SLX, and smaller SLT, are the first power washers ever designed to deliver a high-volume flow at 200°F water, hot enough to melt the toughest of oily messes. The SLX delivers enough hot water flow—up to 9.5 GPM—that you can operate two spray guns at the same time!
Other benefits include:
QUALITY: Packed with Landa quality throughout, the SLX and SLT feature a top-of-the-line, belt-drive Landa Pump with 7-year warranty and low RPM for extended life, as well as a giant Schedule 80 heating coil, made of up to 300 ft. of 3/4‑inch steel pipe with 5-year warranty.
DURABILITY: Extraordinarily rugged frame is made of 2-by-4-inch box steel with an all-metal power platform cushioned by 10 vibration isolators to minimize frame stress.
EFFICIENT: The SLX-SLT is heated by a high-efficiency Beckett burner with dual rings for dial-in air flow. The 3/4″ heating coil is amazingly efficient due to its unique “breathing” design so it heats quieter while promoting optimum heat exchange.
FUNCTIONAL: The SLX-SLT has a remarkably compact footprint, is certified to UL-1776 safety standards, is pre-plumbed for drawing water from an auxiliary tank, has six forklift guides for portability and the control panel is ideally positioned for curb access when the unit is mounted on a trailer or truck bed.
SLX Specifications
Engine Gas Diesel
Model No. GPM PSI Engine CCs(HP) Fuel Tank Tank Pump RPM BTU’s L x W x H SHIP WT.
SLX10-25324E 9.5 2500 Honda 670(24) Gasoline 16 30 1560 887,000 65″ x 36″ x 58″ 2020 lbs.
SLX10-25824E 9.5 2500 Kohler 1028(27) Diesel N/A 40 1470 887,000 65″ x 36″ x 58″ 2160 lbs.
SLT5-30224E 5.2 3000 Vanguard 479(16) Gasoline 10 15 1295 485,000 55″ x 32″ x 51″ 1210 lbs.
SLT6-32324E 5.9 3200 Honda 614(20) Gasoline 10 15 1570 550,000 55″ x 32″ x 51″ 1220 lbs.
SLT8-30324E 7.8 3000 Honda 670(24) Gasoline 10 15 1470 728,000 55″ x 32″ x 51″ 1230 lbs.
SLT5-30824E 4.4 3000 Kohler 686(16) Diesel N/A 26 1295 410,000 62″ x 32″ x 53.5″ 1715 lbs.
SLT6-32824E 5.9 3200 Kohler 1028(27) Diesel N/A 26 1470 588,000 62″ x 32″ x 53.5″ 1785 lbs.
SLT8-30824E 7.8 3000 Kohler 1028(27) Diesel N/A 26 1560 728,000 62″ x 32″ x 53.5″ 1850 lbs.
Note: Landa is constantly improving and updating its products. Consequently, pictures, features, and specifications may differ slightly from current models. Flow rates and pressure ratings may vary due to variances allowed by manufacturers of their machine components. Landa product performance is certified by the Cleaning Equipment Trade Association (CETA) to be within 5% of listed specifications.