SDD Super Fuel-Efficient, High Volume, Hot Water Pressure Washer with 140° Water Temperature Rise.
•Super Heat Transfer Efficiency with Dual Down-Draft Burners
•Dual-Gun Enabled
•Powered by Gasoline or Diesel; Diesel-Heated
•Belt-Drive Landa Pump with 7-Year Warranty
LANDA SDD Series Pressure Washer
The LANDA SDD Series Pressure Washer has the following features:
•Two Super-Efficient Diesel-Fueled Downdraft Burners with super heat transfer efficiency for less fuel consumption resulting in the lowest fuel operating costs in the industry.
•Gasoline-powered Honda or Kawasaki or liquid-cooled, 27 hp diesel Lombardini Engines with keyed electric starter for easy start-up and protection against unauthorized use; polyurethane Battery Box protects and firmly secures battery (battery not included).
•Dual Heating Coils with exclusive doublepass design are easy to access for servicing and insure on-demand hot water.
•Industrial-duty, belt-drive, tri-plunger Landa Pump designed to run at low RPM for long life has 7‑year warranty and single-rail truetrack Pulley Adjustment.
•Corrosion-resistant Float Tank with stainless steel inlet filter and 3/4” float valve with antisiphon backflow protection allows introduction of detergents in high pressure mode.
•Trailer-ready with predrilled Trailer Mounting Brackets and large metal cover placed on the side that faces front for protection of components and accessories while transporting.
•Water-resistant control panel has Voltmeter to monitor generator output, Hour Meter to indicate total operating time, and Adjustable Thermostat to control temperature. For easy troubleshooting, Indicator Lights warn when fuel or oil is low.
•Pre-plumbed with 3‑Way Valve to bypass float tank when drawing water directly from an auxiliary tank.
•Efficient 2,000-Watt Generator produces reliable power for burner.
•Forklift Guides and Lifting Eyes for ease of loading and maneuvering.
•Tri-Lingual Labels for operator protection.
•Adjustable Detergent Valve and optional Steam Valve provide precise high-pressure metering of soap and on-demand wet steam cleaning.
•Insulated, fatiguefree Trigger Gun with stainless steel Variable Pressure Wand feature an ergonomic design.
•Rugged Metal Fuel Tanks are more heat-tolerant than plastic and provide hours of uninterrupted operation.
•Rupture Disk and Thermal Pump Protector protect against excessive heat or pressure.
•Dual Screen Filters on water inlet protect pump from debris.
•Filters and Low-Fuel Shutoff protect against operator neglect.
•Rugged Epoxy Powder Coated 2‑inch square tube Open-Air Steel Frame for ease of servicing and ventilation to prevent overheating; Power Platform is vibration isolated to minimize frame stress.
•Many Safety Features, including a rupture disk, thermal pump protector, flow switches, unloader valve, and low-fuel shutdown help protect your investment in equipment as well as the operators who use it.
•50 ft. of double-wire braid High Pressure Hose rated for up to 6000 PSI and featuring a 24-inch safety hose guard for operator burst protection and Quick-Connect Coupler.
WHY CHOOSE LANDA’s SDD
Landa’s SDD features a super-efficient, dual-burner system that provides a 140°F temperature rise above inlet water temperature with 9.5 GPM of cleaning power at 2500 PSI or 7.8 GPM at 3000 PSI. The SDD supports dual gun operation without a reduction in water temperature. And should one coil go down, the SDD can continue to operate with just one coil until the job is done.* Models are powered by either a Honda or Kawasaki gasoline engine, or a Lombardini diesel engine.
QUALITY: Packed with Landa quality throughout, including a top-of-the-line, belt-drive Landa Pump with low RPM for extended life and a 7‑year warranty.
DURABLE: The extraordinarily rugged frame is made of 2-inch square tube steel with an all-metal power platform cushioned by vibration isolators to minimize frame stress.
EFFICIENT: The SDD’s sleek, clean-burning, dual coils, with double-pass design, heat water faster and more efficiently than other coils allowing you to clean better and faster while saving significantly on fuel costs.
FUNCTIONAL: The SDD is pre-plumbed for drawing water from an auxiliary tank, trailer-ready with included trailer mount brackets, easy to service with open-access design and has forklift guides for portability.
SAFETY: The SDD is certified to UL-1776 safety standards.
* Temperature rise will be less than 140°F with only one coil in operation.
SAVE T HOUSANDS OF DOLLARS IN BURNER FUEL EACH YEAR!
Landa’s SDD uses an average of 21% less burner fuel than comparable pressure washers. Don’t need high volume? Save even more! For jobs where half the SDD’s GPM will suffice, you can get additional fuel and water savings by using one gun equipped with the dual-gun nozzle set option listed below.
LANDA SDD Pressure Washer Specifications:
Engine Gas Diesel
Model No. GPM PSI Engine HP Fuel Tank Tank Pump RPM BTUs L x W x H Ship Weight
SDD8-30324E 7.8 3000 Honda 24 Gasoline 10 20 1460 650,000 60” x 42” x 53” 1,515 lbs
SDD10-25524E 9.5 2500 Kawasaki 27 Gasoline 10 20 1575 750,000 60” x 42” x 53” 1,525 lbs
SDD8-30824E 7.8 3000 Lombardini 27 Diesel N/A 30 1460 650,000 60” x 42” x 53” 1,705 lbs
SDD10-25824E 9.5 2500 Lombardini 27 Diesel N/A 30 1575 750,000 60” x 42” x 53” 1,705 lbs
LANDA SDD Pressure Washer Options:
Part No. Description
8.902-421.0 Dual-Gun Tee Coupler
8.708-714.0 Dual-Gun Nozzle Set (7.8 GPM units)
(includes one each of 0°,15°, 25° & 40° nozzles)
8.708-717.0 Dual-Gun Nozzle Set (9.5 GPM units)
(includes one each of 0°,15°, 25° & 40° nozzles)
8.916-511.0 Steam Valve Kit
Note:LANDA is constantly improving and updating their products. Consequently, pictures, features, and specifications may differ slightly from current models. Flow rates and pressure ratings may vary due to variances allowed by manufacturers of LANDA’s machine components. LANDA attempts to keep their machine performance within ±5% of listed specifications.
