AR (Annovi Reverberi) XTA2G22N pressure washer pump

AR (Annovi Reverberi) XTA2G22N pressure washer pump.

AR (Annovi Reverberi)  XTA2G22N pressure washer pump 2.11 GPM @ 2200 PSI , XTA1750rpm

AR (Annovi Reverberi)  XTA2G22N pressure washer pumps are designed for a wide variety of moderate pressure washing applications. This AR (Annovi Reverberi)  XTA2G22N pressure washer pump is constructed with die-cast bodies and feature a brass head. Internal components of the AR (Annovi Reverberi)  XTA2G22N pressure washer pump include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.

The AR (Annovi Reverberi)  XTA2G22N pressure washer pump Features:

  • Manifold of the XTA2G22N features:
  • – Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety, performance.
  • – Inlet and Discharge Ports: Heavy bosses for added strength.
  • – Offset Discharge Ports: High efficiency, smooth flow.
  • – Bolts: Six Bolts, 6mm, grade 12.9.
  • Valves of the XTA2G22N features:
  • – Ultra Form Cages: Durability, strength and long life of every XTA2G22N pressure washer pump.
  • – Poppets, Seat and Spring: 303 and 400 series stainless steel.
  • – Valve Caps: Machined brass – greater strength.
  • Packing and Plungers of the XTA2G22N features:
  • – High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • – Low Pressure Seals: “U” cup double lip Buna-N. Good positive seal.
  • – Support Guides: Machined brass one-piece construction to assure proper plunger alignment and to maximize packing and seal life.
  • – Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
  • Bearings: Oversized for maximum life and load disbursement, two ball bearings on the solid shaft series and a needle bearing on the drive side and ball on the non-drive side for the hollow shaft series. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
  • Crankcase of the XTA2G22N has: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
  • Rear Cover of the XTA2G22N: Precision die-cast, precision punched gasket sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
  • Plunger Rods in the the XTA2G22N have: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
  • Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
  • Connection Rods of the XTA2G22N are: One piece special alloy aluminum based and bronze, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
  • Crankshaft for the XTA2G22N: Forged one-piece, precision ground and hardened for extremely long life and durability.
  • Oil Seals and O-rings: All XTA2G22N are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
  • Oil Capacity: Flat cover 8 oz. and extended cover 10 oz.
  • Dyno Proven: All XTA2G22N pumps are dyno tested to assure the theoretical design meets the actual design.
  • Valve Design: Each  XTA2G22N pump series has a valve design that optimizes its highest efficiency.
  • Hot Water: High temperature kits are available to 180º F. Refer to breakdown.
  • Wet End Repair: Very simple no special tools are required.
  • Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
  • Design: Using advanced fluid handling design programs. Overall XTA2G22N pump efficiency is increased.

XTA2G22N Pressuer Washer Pump

The The AR (Annovi Reverberi)  XTA2G22N pressure washer pump has the following Specifications:

  • Max GPM………………2.11
  • Max LMP…………………………8
  • Max PSI………………….2200
  • Max Bar………………………….150
  • Power EBHP……………3
  • Bore Dia. mm…………………….15
  • Stroke mm……………….9.6
  • Weight Lbs………………………..11
  • Max Temp……………….140°
  • Oil Capacity………………………10oz
  • Inlet Thread ……………1/2”F
  • Discharge Thread……………….3/8”F

List Price: $615.32
Our Price: $385.79
You save $229.53!

Availability:: available for order
Product Code: XTA2G22N
Annovi Reverberi  XTA2G22N Pressure Washer Pump
PRICE SUBJECT TO CHANGE.  PRICE VALID ON THIS XTA2G22N 11/04/2011

Permanent link to this article: https://etscompany.com/wordpress/2011/11/04/ar-annovi-reverberi-xta2g22n-pressure-washer-pump/