The RKV4G40HD-F24 AR (Annovi Reverberi) Pressure Washer Pump:
4 GPM @ 4000 PSI, 1″ Hollow Shaft – great for most 11 to 14 hp engines with a straight shaft! RKV4G40HD-F24 Plunger Pumps are designed for a wide variety of high pressure washing applications. The RKV4G40HD-F24 are constructed of die-cast bodies and feature a forged brass head. The RKV4G40HD-F24 has Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. The RKV4G40HD-F24 have One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These RKV4G40HD-F24 pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
PARTS LIST: RKV 3400 rpm
The RKV4G40HD-F24 AR (Annovi Reverberi) Pressure Washer Pump Features:
- MANIFOLD: High strength forged brass or nickel plated for long term use.
- BOLTS: Eight 8mm grade 8.8.
- PLUNGERS: A special thick solid ceramic for long life, strong durability and more resilience.
- CRANKCASE: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs.
- BEARINGS: Oversized tapered roller bearing for maximum
- life and load distribution.
- BEARINGS SUPPORTS: Precision die-cast and machined to assure concentricity and alignment.
- VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages to provide long life and positive seating.
- SEALS AND V-PACKINGS: Continuously lubricating for extended life.
- PLUNGER RODS: Stainless steel construction for strength, no plating to scrape off, back-up and o-ring plunger sealing system.
- CONNECTING RODS: One piece special alloy aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength.
- Manifold specifics for RKV4G40HD-F24 pressure washer pump:
- – Forged Brass: Strength and no porosity – long life. higher hydrostatic pressures – safety, performance.
- – Inlet and Discharge Ports: Heavy bosses for added strength.
- – Offset Discharge Ports: High efficiency, smooth flow.
- – Bolts: Eight bolts, 8mm, grade 8.8.
- Valves specifics for RKV4G40HD-F24 pressure washer pump:
- – Valve Caps: Stainless steel on pumps rated at 3200 PSI and higher, better hydrostatic loads. Machined brass on pumps <3200 PSI.
- – Ultra Form Cages: Durable, strength, and long life.
- – Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Packing and Plungers specifics for RKV4G40HD-F24 pressure washer pump:
- – High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- – Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- – Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- – Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
- Bearings: Oversized tapered roller bearing for maximum life and load disbursement of the RKV4G40HD-F24 Pressure Washer Pump.
- Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
- Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
- Rear Cover for the RKV4G40HD-F24 Pressure Washer Pump: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
- Plunger Rods on this RKV4G40HD-F24 Pressure Washer Pump: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
- Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
- Connecting Rods on this RKV4G40HD-F24 Pressure Washer Pump: One-piece special allow aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
- Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
- Oil Seals and O-rings on the RKV4G40HD-F24 Pressure Washer Pump: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
- Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
- Oil Capacity of the RKV4G40HD-F24 Pressure Washer Pump: 15.5 oz.
- Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
- Valve Design: Each RKV4G40HD-F24 Pressure Washer Pump series has a valve design that optimizes its highest efficiency.
The RKV4G40HD-F24 AR (Annovi Reverberi) Pressure Washer Pump has the following specifications:
- Max GPM………………4 Max
- LMP…………………………15.1
- Max PSI………………….4000
- Max Bar………………………….275
- Power EBHP……………11
- Bore Dia. mm…………………….18
- Stroke mm……………….7
- Weight Lbs………………………..21
- Max Temp……………….140°
- Oil Capacity………………………15oz
- Inlet Thread ……………1/2”F
- Discharge Thread……………….3/8”F
The RKV4G40HD-F24 AR (Annovi Reverberi) Pressure Washer Pump
List Price: $1,060.37
Our Price: $507.94 
You save $552.43!
Availability:: available for order
Product Code: ARWP-RTR-RKV4G40HD-F24
Annovi Reverberi Pressure Washer Pump
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS RKV4G40HD-F24 Pressure Washer Pump 11/8/2011.
