SXWA7G50 AR Annovi Reverberi Pressure Washer Pump.
SXWA7G50 AR Annovi Reverberi Pressure Washer Pump
SXWA7G50 Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material over sized for strength and load disbursement. These SXWA7G50 pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft.
The SXWA7G50 AR Annovi Reverberi Pressure Washer Pump has the following specifications:
- Max GPM………………7
- Max LMP…………………………26.5
- Max PSI………………….5000
- Max Bar………………………….345
- Power EBHP……………24
- Bore Dia. mm…………………….18
- Stroke mm……………….21
- Weight Lbs………………………..35
- Max Temp……………….140°
- Oil Capacity………………………32oz
- Inlet Thread ……………1/2”F
- Discharge Thread……………….3/8”F
The SXWA7G50 AR Annovi Reverberi Pressure Washer Pump Features:
- Manifold:
- – Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety, performance.
- – Inlet and Discharge Ports: Heavy bosses for added strength.
- – Offset Discharge Ports: High efficiency, smooth flow.
- – Bolts: Eight bolts, 10mm, grade 8.8.
- Valves:
- – Ultra Form Cages: Durable, strength, and long life.
- – Poppets, Seat and Spring: 303 and 400 series stainless steel.
- – Valve Caps: Forged. Patented Valve Cap Design
- Packing and Plungers:
- – High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- – Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- – Support and Guides: Machined brass, 2-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- – Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
- Bearings: Over sized for maximum life and load disbursement
- Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
- Crankcase: Precision die-cast, large cross head for strength, large cooling fins and anodized (for maximum heat dissipation).
- Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
- Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
- Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
- Connecting Rods: Heavy 2-piece special alloy aluminum based, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
- Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
- Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
- Oil Capacity: 32 oz.
- Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
- Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
- Hot Water: High temperature kits are available to 180ºF. Refer to breakdown.
- Wet End Repair: Very simple no special tools required.
- Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
List Price: $1,574.48
Our Price: $976.25
Click to order the SXWA7G50 Pressure washer pump.
Availability:: available for order
Product Code: SXWA7G50
Price Subject to change. Price valid on the SXWA7G50 AR Annovi Reverberi Pressure Washer Pump 9/10/2012
