Today’s blog will be about the General Pumps EZ4040G Pressure Washer Replacement Pump.
Order the EZ4040G Online.
If your pressure washer uses a gas flanged General Pump odds are it’s the EZ4040G unit. This unit is used on a lot of industrial pressure washers because of its strength and durability for everyday cleaning use. The EZ4040G has a powerful rating of 4000 PSI at a industry standard 4 gallons per minute. With an added 3400 RPM maximum pump speed you will be enjoying this units life for years and years.
Here is some technical data you should be aware of for the EZ4040G:
- The stroke and bore of this pump both measure 13mm.
- 14 oz. oil capacity on the crankcase is one of the larger ones on the market today.
- This EZ4040G has a 165 F degree maximum on the fluid it’s pumping.
- Comes with a 1/2″ FPT inlet port and a 3/8″ FPT outlet connection standard.
- It has a 1″ hollow shaft and weighs in at just around 20 pounds.
- Finally to know if it will fit the space you need it has measurements of 8.8″x9.7″x6.5″.
If you need more information on the EZ4040G pump click here for the General Pump Breakdown.
The EZ4040G has a very special one piece plunger designed to prevent captivation and thermal shock with an innovative bonding process of the pumps plungers. This replacement pump is made to fit on pressure washers with gasoline engine speeds up to 16 HP via a standard SAE J609 mounting flange. With a brass forged manifold and all anodized and die cast aluminum crankcase the unit is going to last you a long time before you have to replace it again. Another long life feature of the EZ4040G pump is the use of stainless steel for all of the outlet and inlet ports, making the everyday wear and tear of connecting and disconnecting the pump less destructive to these ports.
Is this the pump for you? Give us a call to order the EZ4040G pump from General Pumps: Call 1-877-824-7763 {Smart Phones Click to Call}