K109 – Repair Kit 109 from General Pump.
Order the K109 Kit from General Pumps.
The K109 packing / water seal repair kit from General Pump, goes by may names. You may see the K109 written as k-109, k 109 or even kit 109. It really doesn’t matter how it’s written or said, it’s all the same high quality kit from General Pump you will need to use to fix the wet end of your pump. The seals, rings and packings on this 16mm repair kit are all made from the best material and are tested before, during and after production to ensure they meet and exceed the specifications General has set up for its pressure washer pumps. Basically, this means the K109 will last your machine for years before it has to be replaced again.
K109 – Repair Kit 109 from General Pump
The individual parts in this K109 Kit are:
- Three of part number 90264400, the 16mm low pressure seals.
- A quantity of three of the re-stop rings, part number 90264300.
- Part number 90264200 the actual packing / seal in a quantity of three.
While this is one of the most common repair kits from General Pump for it’s 16mm style of plungers, it’s always best to check your pumps manual / parts breakdown to verify if this is indeed the correct kit and how many you will need. Should you need to re-print that manual you can click here to find your pump and see if the K109 kit is part of its repair parts.
If you need any help in deciding if the K109 kit is the correct item for you give us a call at 1-877-824-7763 {Smart Phones Click to Call} and we will be there to assist you.
After you have talked to us, or have verified from the parts breakdown for your specific pump that this is the correct repair kit, you can order it directly online, by clicking the link below.
