XMV3.5G25D-F24 Pump from Annovi Reverberi

XMV3.5G25D-F24 Pump from Annovi Reverberi

Order the XMV3.5G25D-F24 Pump from Annovi Reverberi.

The XMV3.5G25D-F24 is a 3.5 gallon per minute pump with a 2500 PSI maximum.  The XMV3.5G25D-F24 has been also called the XMV3.5G25D, XMV3.5G25, XMV3.5G, XMV3.5, XMV35G25D-F24, XMV35G25D, XMV35G25, XMV35G, or even just the XMV35, but however you have seen it written, it’s the same great pump from Annovi Reverberi that spins at 3400 RPM and is built to last you a life time.  The head is of forged brass with a body and crank case made from a special die casting process.  Even the internal workings on this unit are made from the finest materials, from the rubber in the seals and o-rings up to the ceramic plungers and stainless steel valves and seats.  This replacement pump will stand up to anything you throw at it.

XMV3.5G25D-F24 Pump from Annovi Reverberi

XMV3.5G25D-F24 Pump from Annovi Reverberi

Happen to own one of these XMV3.5G25D-F24 or XMV3.5G25 Pumps from AR Pumps already, and need some repair kits or parts, but don’t have your manual that came with the pump?  You can download the parts breakdown by clicking here, and using it to determine the items you will need to fix up this unit and get you and your business back on the road and working.

Exploded Parts Breakdown for the XMV3.5G25D-F24 AR Pump

Exploded Parts Breakdown for the XMV3.5G25D-F24 AR Pump

More features you may like to know about your XMV3.5G25D-F24 Pump.

 

  • The flow rate of 3.5 gallons per minute is the same as 13.2 liters per minute.
  • A 2500 maximum PSI is equal to 170 BAR pressure.
  • The EBHP power rating of 5.5 is industry leading.
  • A 15mm Bore and 8.2mm Stroke are industry standards for this type of pump.
  • This XMV3.5G25 pump weighs in at only 16 pounds.
  • The maximum temperature of the pump is 140°, but high temperature kits are available to 180º F. (Contact Us)
  • The crankcase oil capacity is 14.6oz.
  • The inlet thread measures 1/2”F.
  • An outlet thread with a measurement of 3/8”F is standard.

If you are ready to order this pump for your pressure washer you can do so by clicking the link below.  Should you need more help determining if this is the correct item for you please give us a call and we will be happy to help you out.  1-877-824-7763 {Smart Phones Click to Call} As always you have piece of mind when you order from us as we stand behind every pump part or kit we sell.

Order the XMV3.5G25D-F24 Pump from Annovi Reverberi.

 

Permanent link to this article: https://etscompany.com/wordpress/2015/02/25/xmv3-5g25d-f24-pump-from-annovi-reverberi/