Jul 13 2011

Don’t replace your Pressure Washers, Repair them in the Delaware Valley

ETS offers Pressure Washer Service on virtually ALL brands (ALL makes
and models) of pressure washers, steam cleaners and pressure washer
pumps to the Delaware Valley. We service brands like LANDA, Mi-T-M,
Jenny, epps, Kranzle, CAT PUMPS, General Pump, Giant Pump, Comet Pump
and more! (We also carry Pressure
Washer Pump Parts – Click
here) Call today at 610-583-7657.

Pressure Washer Service

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/13/dont-replace-your-pressure-washers-repair-them-in-the-delaware-valley/

Jul 13 2011

The World’s Best Graffiti Remover – Taginator Graffiti Removal Product

Use on MASONRY Surfaces
Taginator Graffiti Remover
Taginator Graffiti Remover Shop for taginator and tagaway graffiti removal products nowTaginator Graffiti Remover
BIODEGRADABLE GRAFFITI REMOVER for MASONRY!
Spray onto MASONRY…. Rinse

TAGINATOR® World’s Best Graffiti Remover sprayable liquid quickly dissolves graffiti. TAGINATOR® Graffiti Remover has a pleasant fresh and clean scent. TAGINATOR® Graffiti Remover soaks through graffiti into masonry surfaces. Deep rinse additive allows graffiti to be easily pressure rinsed out of masonry pores. TAGINATOR® Graffiti Remover will easily remove multi-layered graffiti or graffiti that has been painted over! TAGINATOR® Graffiti Remover is so effective the need to pre-coat masonry with sacrificial or permanent coatings is not necessary. TAGINATOR® Graffiti Remover is non-flammable and V.O.C. compliant.

Works on:
Removes:
Preferred by:
● Brick ● Cinder Block ● Slate ● Marble ● Granite ● Stucco ● Terra Cotta ● and many other surfaces!
● Spray Paint ● Latex Paint ● Enamel Paint ● Lacquer!
●Public Works ● Housing Authority ● Parks/Forests ● Highways & Mass Transit ● School Systems

Taginator® Graffiti Removal Steps

Taginator Graffiti Remover

1. Spray TAGINATOR® graffiti remover onto graffiti using TAGSPRAYER™.
2. Let TAGINATOR® graffiti remover soak into masonry for 5 – 20 minutes.
Taginator Graffiti Remover
3. High pressure rinse the Graffiti away.

Packaging:
Taginator® graffiti remover is available in 1 quart spray bottles (six per case), 1 gallon and 5 gallon containers.
Taginator Graffiti removal product sizes

Techincal Specifications for Taginator® graffiti removers
Form
Liquid
Viscosity
Slight
Color
Dark Umber
Odor
Fresh & Clean Scented
Biodegradable
Yes
V.O.C. Content
<30% by WT.
Flammibility
NO
Carcinogens
None
Specific Gravity
1.177± .005 gm/ml
Density
9.8 lbs / Gal
Stability (unopened)
3 years
Water Solubility
Emulsifiable
Low Cloud Point
10º f.
High Cloud Point
138º f.
Effective Tempeture Range
10º f. to > 100º f.
Coverage per Gallon
175 to 250 sqft
Phosphates
None
EPA Hazardous Air Pollutants (HAPS) List
No
EPA Extremely Hazardous Substance List
No
EPA Toxic Release Inventory List
No
California Proposition 65 List
No
Clean Water Act Pollutant List
No

TAGSPRAYER™ – 2 Gallon Compression Sprayer for Taginator

A graffiti removal product such as TAGINATOR® requires an applicator that can withstand the chemical combinations it contains. ETS Co. has designed a sprayer specifically for use with TAGINATOR®. This high impact resistant, two gallon poly tank has a rebuildable steel and poly pump assembly. The compression cup is Taginator compatible. All Parts in the unit are available for replacement.
Tagsprayer for Taginator Graffiti Remover TAGSRPAYER Graffiti Remover parts
STOCK No. EQJS-1010-A
DESCRIPTION: 2 gal. sprayer
Order now.

For information on Tagaway Graffiti Removers Click Here

GET STARTED with GRAFFITI REMOVERS

Shop for taginator and tagaway graffiti removal products now
Shop for taginator and tagaway graffiti removal products now
Shop for taginator and tagaway graffiti removal products now
1st Time Trial Offer*
1st Time Value Deals*
All Products*
Get $25 Gift Coupon
FREE Shipping

Order this quart combo and get a $25.00 gift coupon in the box! use it towards your second purchase of Tagaway® or Taginator®!

•Click Here for Details•

1st time user choose from three special price offers with FREE SHIPPING!

•Click Here for Details•
Buy Taginator or Tagaway Graffiti Removal Products Online Here

*We may recomend purchasing product through your local TAG Distributor

Over 100 Graffiti Removal Products stocking distributors check for one near you!
Taginator / Tagaway Graffiti Remover Distributors

Permanent link to this article: https://etscompany.com/wordpress/2011/07/13/the-worlds-best-graffiti-remover-taginator-graffiti-removal-product/

Jul 12 2011

General Pump High Flow / High Pressure Pumps


General Pump 66 Series High Flow The General Pump 66 Series High Flow pumps are versatile and feature a new triplex design that extends seal life! GPM ranges from 6.3 to 12.0 and pressures from 2500 to 3600 psi.  

 

Photo(Where available) Parts List Description

Triplex pump

TSF2021 (new pump price)

Triplex pump

TSF2219 (new pump price)

Triplex pump

TSF2221 (new pump price)

Triplex pump

TSF2421 (new pump price)

Triplex pump

 


General Pump 66 Series High Pressure The 66 Series General Pumps provide a COMPACT high pressure design providing from 4.3 to 5.5 gpm and from 5000 up to 5800 psi. 

 

 

Photo(Where available) Part Name/Number Description

TSP1621

High pressure triplex pump

TSP1819

High pressure triplex pump

 

 

 

 

 


General Pump T Series 69 The T Series 69 High-Flow general pumps offer a large crankcase that produces 8.0 to 12.0 gpm at low pressure. 

 

 

Photo(Where available) Part Name/Number Description

T41

Triplex plunger pump, 36mm bore

TS1041

Triplex plunger pump, 20mm bore

TS1531

Triplex plunger pump, 20mm bore

 

 

 

 

 


General Pump T Series 76 The T Series 76 General Triplex Plunger Pumps are the High Flow Industries choice! Lifetime warranty on manifold! From 6.6 gpm to 21 gpm & 1000 to 5800 psi max. 

 

 

Photo(Where available) Part Name/Number Description

T1551

Triplex plunger pump, 30mm bore

T4251

Triplex plunger pump, 20mm bore

T61

Triplex plunger pump, 45mm bore

T81

Triplex plunger pump, 45mm bore

 

 

 

 

 


General Pump T Series 48 The T Series 48 General Pumps are great for High-Flow / High Pressure Applications with its dual mainfold a.k.a, sixplex a.k.a. multiplex design, 9 to 11 gpm – high pressure, 2-3000 psi. 

 

Photo(Where available) Part Name/Number Description

T1631

Sixplex plunger pump

T2031

Sixplex plunger pump

TS1351

Sixplex plunger pump

 

 

 

 

 


General Pump T Series 77 The T Series 77 General Pumps are designed for High-Flow & High Pressure Applications – 25 gpm+ 

 

Photo(Where available) Part Name/Number Description

T121

Sixplex plunger pump, 45mm bore

T151

Sixplex plunger pump, 45mm bore

T1591

Sixplex plunger pump, 30mm bore

T3551

Sixplex plunger pump, 20mm bore

 

 

 

 

 


General Pump AT Series 75 AT Series 75 General pumps are ideal for grain cleaning and jetting applications with its dual pulsing action, 7.93 gpm up to 22.48 max gpm – low pressure. 

 

Photo(Where available) Part Name/Number Description

AT0033

Duplex plunger pump, splined shaft

AT0055

Triplex plunger pump, splined shaft

AT0088

Triplex plunger pump, splined shaft

 

 

 

 

 


General Pump AT Series 77 The AT Series 77 General Pumps are great for High-Flow applications with its dual manifold a.k.a, sixplex a.k.a. multiplex design, 29.1 to 45 gpm – low pressure. 

 

Photo(Where available) Part Name/Number Description

No Photo

AT0111

Sixplex plunger pump, splined shaft

No Photo

AT0177

Sixplex plunger pump, splined shaft

No Photo

AT0177B

Sixplex plunger pump, splined shaft

 

 

 

 

 

 

 

 

 

Permanent link to this article: https://etscompany.com/wordpress/2011/07/12/general-pump-high-flow-high-pressure-pumps/

Jul 12 2011

MOSMATIC roof surface cleaner DR-520

MOSMATIC roof surface cleaner DR-520

The MOSMATIC roof surface cleaner DR-520 is an industrial quality tool specially designed for efficient, high pressure roof cleaning while keeping the operator in a safe operating area.

The premium MOSMATIC swivel ensures optimum performance under harsh conditions. This new design allows the operator to maneuver and lower the roof cleaner along the roof surface by using the high pressure hose and the safety cable. The height and width adjustable cleaner works for most common roof designs, adding safety and stability.

Heigth (adjustable) 7.7″ – 9″

Width (adjustable) 21.6″ – 25.2″

Stainless steel housing 21″

Maximum Pressure 4000 psi

Weight 31.9 lbs

Features

  • The DR-520 is adjustable up to 3.54” extended width and 1.3” in height. It works for any type of roof design adding safety and stability.
  • Allows you to easily secure the roof cleaner with a safety rope or cable. Swiveling Connector for easy hose connection.
  • Adjustable pressure guarantees efficient cleaning on any type of roof surface or pitch.
  • Makes it easy and convenient to turn off the flow to the unit.

List Price: $1717.23

Our Price: $1717.23 CLICK HERE TO PURCHASE

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/12/mosmatic-roof-surface-cleaner-dr-520/

Jul 12 2011

Pressure Washer Nozzles with Holder & Clip

4 Pc QC #3.0 Nozzles with Holder & Clip

Product Code: 35.210.034BEP (CLICK TO PURCHASE)

The 35.210.034 BEP Features:
• 4 Piece QC Nozzle Set with Holder and Clip

• Convenient clip attaches to a belt or machine for quick access

• Nozzle Size: 3.0

• Contents: One each of a 0º, 15º, 40º and soap nozzle

• Fits most pressure washers with a 1/4″ quick connect inlet

• Color coded for easy nozzle spray pattern identification

• Cap designed for easy grip

• Hardened Stainless Steel insert

• 5,000 PSI max. pressure

• Weight: 4.6 oz

OUR PRICE $13.84 (CLICK TO PURCHASE)

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/12/pressure-washer-nozzles-with-holder-clip/

Jul 11 2011

GIANT Pumps, Parts and Kits

GIANT CONSUMER PUMPS
GIANT GXR Vertical or Horizontal Pumps with Regulator includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories

Pump Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End

GXR 2424

2.4

2400

3450

5.2

Brass

GXR 2224

2.2

2400

3450

5.0

Brass

Weight: 9 lbs. Bore Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature: 80 degree F

Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT

GIANT GX Vertical or Horizontal Pumps with Unloader includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories GX2525

Pump Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End
2.0
2500
3450
3.4
Brass
2.3
2500
3450
3.9
Brass

GX 2525

2.5

2500

3450

4.3

Brass

Weight: 9 lbs. Bore Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature: 80 degree F

Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT

GIANT P200 PUMPS

Series Triplex Plunger Pumps

P200 Pump Assemblies

 

P200 Belt Drive P200 Electric Drive
GIANT BELT DRIVE Pump
GIANT ELECTRIC DRIVE Pump
P200 Gas Drive
GIANT GAS DRIVE Pump

GIANT P200 Pump Assemblies


Model

Max. GPM

PSI Continuous
 PSI Intermittent

Max. RPM

Req’d BHP

Fluid End

P205

0.5
 2000

2500
 1750 1.2

Brass

P206

0.8

2000

2500

1750

2.1

Brass

P205

0.9

2000

2500

3450

1.2

Brass

P208

1.0

2000

2500

1750

2.6

Brass

P230

1.1

2000

2500

1750

2.8

Brass

P209

1.5

2000

2500

1750

6.2

Brass

P206

1.5

2000

2500

3450

1.8

Brass

P223

1.7

2000

3000

1750

4.6

Brass

P210

1.8

2000

2500

1750

2.6

Brass

P217

1.8

2000

2500

1750

2.8

Brass

P208

1.9

2000

2500

3450

2.6

Brass

P230

2.0

2000

2500

3450

2.8

Brass

P221

2.3

2000

2500

1750

2.8

Brass

P209

2.7

2000

2500

3450

3.7

Brass

P223

3.0

2000

3000

3450

6.2

Brass

P217

3.3

2000

2500

3450

4.6

Brass

P210

3.3

2000

2500

3450

4.6

Brass

P218
 3.4 2000

2500
 1750

4.7

Brass

P219

4.2

2000

2500

1750

4.7

Brass

P221

4.2

2000

3450

5.8

Brass

P220
 4.7 2000

2500
 1750 6.5

Brass
GIANT P300 PUMPS

Series Triplex Plunger Pumps

GIANT P300 ASSEMBLIES

 

P300 Electric Drive P300 Gas Drive
GIANT P300 Series Pump with Electric Drive
GIANT P300 Series Pump with Gas Drive
P300 Belt Drive P300 Gas Drive 2
GIANT P300 Series Pump
GIANT P300 Series Pump with Gearbox

GIANT P300 SERIES PUMPS


Model

GPM Cont.

PSI Cont.
PSI Inter.

Max. RPM

Req’d BHP

Fluid End

P340

3.5

3500

4000

1750

8.4

Brass

P317

3.7

3000

3500

1800

7.7

Brass

P313

3.8

3200

3500

3450

8.4

Brass

P314

3.8

3500

4000

3450

9.2

Brass

P316

3.9

3000

3500

1450

8.1

Brass

P316

4.7

2500

3000

1750

8.1

Brass

P319

4.8

2500

3000

3400

8.3

Brass

P318

5.5

2000

1450

7.6

Brass

P318

6.6

2000

1750

7.6

Brass

 

GIANT 400 Series Triplex Plunger Pumps

P460

Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP
 Fluid End

Notes
3.8
7250
1450
19.0
S.S.
5.5
5000
1450
19.0
Brass
5.5
3200
1450
19.0
Al.Bronze
7.5
3200
1450
14.8
Brass
5.5
4000
1450
15.2
Al.Bronze
8.3
2600
1450
14.9
Brass
10.0
2500
1450
20.7
Brass
10.7
2000
1450
15.6
Brass
13.0
1700
1460
15.2
Brass
13.0
1700
1460
15.2
Al.Bronze
13.0
2000
1460
15.2
316 S.S.

Weight: 37 lbs. Shaft Size: 28mm Max. Temperature: 160 oF (104 oF for P460) * Consult factory when operating at this speed.

Port sizes:

Pump Model Inlet Port Discharge Port
P420A/P422 (2) 1 ” NPT (2) 3/4″ NPT
P440 (2) 3/4″ NPT (2) 3/4″ NPT
P430 (2) 3/4″ BSP (2) 3/4″ BSP
P450A (2) 1/2″ BSP (2) 1/2″ BSP
P420-3100/P420-5100 (2) 1″ BSP (2) 3/4″ BSP
P460 (2) 1/2″ BSP (2) 1/2 ” BSP

 

GIANT Bentonite PumpsGiant Industries Bentonite pumps, are used for transporting of the Bentonite fluid used in the stabilization of bore holes in horizontal boring applications. These pumps range from up to 18.5 GPM – 84.5 GPM and up to 1500 PSI. All of these pumps are made of cast Iron fluid ends with solid ceramic plungers provide long life. And the gear end construction of heavy-duty cast iron crankcase, glazed, hardened and ground crankshaft and aluminum-bronze bearings provide years of life. With a seal life of 300-400 hours you can expect Performance Under Pressure with Giant.

BP5236

Volume:………………………………………Up to 18.5 GPM
Discharge Pressure:………………………….Up to 900 PSI
Speed:…………………………………………Up to 570 RPM
Inlet Pressure:…………………………………-4.35*-150PSI
Power Consumption:…………………………………..12 HP
Plunger Diameter:………………………………………36mm
Plunger Stroke:…………………………………………42mm
Crankshaft Diameter:………………………………….35mm
Key Width: ……………………………………………….8mm
Shaft Rotation:……………Top of pulley towards manifold
Temperature of Pumped Fluids: ……………Up to 104°F
Inlet Ports:……………………………………..(2) 1-1/2″ NPT
Discharge Ports:…………………………………..(2) 1″ NPT
Weight:………………………………………………….120 lbs.
Crankcase Oil Capacity:…………………………..116 fl.oz.
Fluid End Material:………………………………….Cast Iron
BP5236

BP6150

Volume:……………………………………..Up to 42.3 GPM
Discharge Pressure:……………………….Up to 1500 PSI
Speed:………………………………………..Up to 600 RPM
Inlet Pressure:……………………………….-4.35* -150PSI
Power Consumption:………………………………..43.8 HP
Plunger Diameter:……………………………………..50mm
Plunger Stroke:………………………………………..48mm
Crankshaft Diameter:…………………………………45mm
Key Width: …………………………………………….12mm
Crankshaft Mounting:…………………………..Either side
Temperature of Pumped Fluids: …………..Up to 104 oF
Inlet Ports:…………………………………….(2) 2-1/2″ NPT
Discharge Ports:…………………………….(2) 1-1/4″ NPT
Weight:……………………………………………..275.5 lbs.
Crankcase Oil Capacity:…………………………..1.1 Gal.
Fluid End Material:………………………………..Cast Iron
BP6150

BP7170

Volume:………………………………………Up to 84.5 GPM
Discharge Pressure:……………………….Up to 1015 PSI
Speed:………………………………………..Up to 560 RPM
Inlet Pressure:………………………………..-4.35* -150PSI
Power Consumption:…………………………………..59 HP
Plunger Diameter:………………………………………70mm
Plunger Stroke:…………………………………………52mm
Crankshaft Diameter:………………………………….48mm
Key Width: ………………………………………………14mm
Crankshaft Mounting:…………………………….Either side
Temperature of Pumped Fluids: ……………Up to 104 oF
Inlet Ports:……………………………………..(2) 2-1/2″ NPT
Discharge Ports:……………………………..(2) 1-1/4″ NPT
Weight:………………………………………………….423 lbs.
Crankcase Oil Capacity:…………………………….1.1 Gal.
Fluid End Material:………………………………….Cast Iron
BP7170

 

GIANT Light Industrial Pumps


Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End
1.8
2000
3450
3.3
Brass

HR2527

2.5

2700

3450

4.6

Brass

HR3025

3.0

2500

3450

6.8

Brass

HR3030

3.0

3000

3450

6.2

Brass

Weight: 9 lbs. Bore Size: 3/4″ for HR2527, 1″ for HR3030 Max. Temperature: 80 degree F Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT
GIANT HIGH TEMPERATURE PUMPS


Pump Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End

Shaft (mm)

P46HT

2.1

900

750

1.3

Brass

18

P46W-HK+

4.5

1700

1655

5.3

Brass

18

P56HT

3.2

900

750

2.0

Brass

22

P56W-HK+

7.1

2500

1655

10.2

Brass

22

MP4130HT

10.5

1200

750

8.6

Al. Bronze

28

MP4130HTC*

10.5

1200

750

8.6

Al. Bronze

28

LP121HT

17.6

1200

570

14.6

Al. Bronze

35

LP121HTC*

17.6

1200

570

14.6

Al. Bronze

35

Max. Temperature: 220 oF + Max. Temperature: 190 oF * HTC = Pumps with coolant connection

GIANT CORROSION RESISTANT PUMPS

Aluminum Bronze Manifolds & 316 Stainless Steel Internal Wet End Parts


Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Weight (lbs)

Shaft (mm)

P221AR-3100

2.3

2000

1750

3.2

12

24

P217A-3100

3.4

2000

3450

4.7

12

24

P218A-3100

3.4

2000

1750

4.7

12

24

P219A-3100

4.2

2000

1750

5.8

12

24

P220A-3100

4.7

2000

1750

6.4

12

24

P230A-3100

1.1

2000

1750

2.8

12

24

P420A-3100

13.0

1700

1460

15.2

37

28

P430A-3100

5.5

5000

1460

19.0

37

28

MP4130-3100

15.2

1900

1085

20.0

72

28

LP122A-3100

39.0

1300

885

34.5

116

32

GP6145A-3100

46.2

1740

800

55.8

309

42

GP7155A-3100

66.0

1500

700

70.5

455

48

316 Stainless Steel Manifolds and Internal Wet End Parts


Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Weight (lbs)

Shaft (mm)
2.3
2000
1750
3.2
12
24

P217A-5100

3.4

2000

3450

4.7

12

24

P218A-5100

3.4

2000

1750

4.7

12

24

P218A-5100E

3.4

2000

1750

4.7

12

24

P219A-5100

4.2

2000

1750

5.8

12

24

P219A-5100E

4.2

2000

1750

5.8

12

24

P220A-5100

4.7

2000

1750

6.4

12

24

P220A-5100E

4.7

2000

1750

6.4

12

24

P56-5100

7.1

2100

1655

10.2

22

18

P420A-5100

13.0

1700

1460

15.2

37

28

LP121A-5100

36.0

1300

885

32.1

116

35

GP5145-5100

43.3

1500

750

44.8

179

35

GP7155-5100

66.0

1500

700

70.5

455

48

P230A-5100

1.1

2000

1750

2.8

12

24

P55-5100

4.9

2320

1420

7.8

18

24

P450-5100

5.5

5000

1450

19

37

28

P422-5100

10

2200

1450

15.2

37

28

LP301A-5100

14.2

4000

1000

39.2

119

35

LP600-5100

9.8

6000

1000

40.6

119

35

LP250A-5100

26

2200

1000

39.4

119

35

GP5136-5100

33.8

2300

910

53.6

179

35

GP7142-5100

38.4

2600

700

68.9

374

52
GIANT CO2 Pumps

CP205, CP218, CP220
CP205
Flow:…………………………………Up to 0.21 GPM
PSI:…………………………………….2000/2500 PSI
RPM:……………………………………………….1750
Inlet Ports: ……………………………..(2) 1/2″ BSP
Discharge Ports: ………………………(2) 3/8″ BSP
Temp. of pumped fluids:……………………….-40oF
Weight:…………………………………..11 lbs. 11oz
CP218
Flow:…………………………………..Up to 1.4 GPM
PSI:……………………………………………2030 PSI
RPM:…………………………………………………750
Inlet Ports:……………………………….(2) 1/2″ BSP
Discharge Ports:……………………….(2) 3/8″ BSP
Temp. of pumped fluids:……………………….-40oF
Weight:……………………………………11 lbs. 11oz.
CP220
Flow:…………………………………Up to 1.93 GPM
PSI:……………………………………………2030 PSI
RPM:…………………………………………………750
Inlet Ports: ……………………………..(2) 1/2″ BSP
Discharge Ports: ………………………(2) 3/8″ BSP
Temp. of pumped fluids:……………………….-40oF
Weight:…………………………………..11 lbs. 11oz.
CP420 CP7155
CP420
Flow:…………………………………Up to 6.4 GPM
PSI:…………………………………………..1810 PSI
RPM:…………………………………………………750
Inlet Ports: ……………………………..(2) 3/4″ NPT
Discharge Ports: ………………………(2) 3/4″ NPT
Temp. of pumped fluids:……………………….-40oF
Weight:…………………………………..11 lbs. 11oz
CGP7155
Flow:…………………………………Up to 51.5 GPM
PSI:……………………………………………1450 PSI
RPM:………………………………….Up to 550 RPM
Inlet Ports:…………………………….(2) 2-1/2″ NPT
Discharge Ports:……………………..(2) 1-1/4″ NPT
Temp. of pumped fluids:……………………….-40oF
Weight:………………………………………….455 lbs
CLP200
Flow:…………………………………Up to 9.5 GPM
PSI:…………………………………………..1750 PSI
RPM:………………………………………………..500
Inlet Ports: ………………………..(2) 2X1-1/4″ BSP
Discharge Ports: …………………….(2) 2X1 ” BSP
Temp. of pumped fluids:……………………….-40oF
Weight:………………………………….. 119 lbs.
CLP121A
Flow:…………………………………Up to 16.3 GPM
PSI:……………………………………………1740 PSI
RPM:…………………………………. 500 RPM
Inlet Ports:…………………………….(2) 1-1/4″ BSP
Discharge Ports:……………………. (2) 1-1/4″ BSP
Temp. of pumped fluids:……………………….-40oF
Weight:………………………………………….119 lbs

GIANT Industrial Triplex Plunger Pumps

P46/P55/P56 Pumps


Pump Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End

Notes

P57

1.4

6500

1420

6.0

S.S.

P46

3.9

2200

1420

5.3

Brass

P55

6.0

2320

1750

10.2

Brass

P56

7.5

2200

1750

10.2

Brass

P56-5100

7.1

2100

1655

10.2

316 S.S.

Standard Seals

P56-5111

7.1

2100

1655

10.2

316 S.S.

Viton Seals

P56-5121

7.1

2100

1655

10.2

316 S.S.

Teflon/Viton Seals

* Includes Pump, Unloader, Pop-off valves, Two Guns, Pressure Switch, Thermal Relief Valve Weight: 18 lbs. Shaft Size: 18mm for P46W, 22mm for P55, P56, P56-5100, P57, 24mm for P54, P58, P59 Max. Temperature: 160 degree F

P54/P58/P59 Pumps


Pump Model

Max. GPM

PSI Continuous
 PSI Intermittent

Max. RPM

Req’d BHP

Fluid End

P54
 4.8 4000

3300
 1750

11.0
 Brass

P54GB
 4.8 4000

3300
 1750

11.0
 Brass

P58

6.0

3500

3000

1750

12.1

Brass

P58GB
 6.0 3500

3000
 1750

12.1

Brass

P59
 9.0 1900

1000
 1750

10.0
 Brass

P59GB

9.0

1900

1000

3500

10.0

Brass

P59DG*

9.0

1900

1000

3500

10.0

Brass

Inlet Port & Discharge Port:

Pump Model Inlet Port Discharge Port
P46/P55/P56/P56-5100/P56-5100/P57 (2) 1/2″ BSP (2) 3/8″ BSP
P54/P58/P59 (2) 3/8″ BSP & (1) 1/2″ BSP (2) 3/8″ BSP

GIANT SP Pumps


Pump Model

Max. GPM

Max. PSI

Max. RPM

BHP

Max. Temp. F

SP100W

11.2

2000

1420

14.5

160° F
6.7
3200
1420
14.8
160° F

Weight: 30 lbs. Shaft Size: 28mm Max. Temperature: 160 degree F Inlet Port: (2) 3/4″ NPT Discharge Port: (2) 3/8 ” NPT

 

GIANT MP Series Pumps


Pump Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End

Note

MP4120W

8.7

3600

1420

21.8

Al. Bronze

MP4124W

12.6

3000

1420

21.0

Al. Bronze

MP4130

15.2

1900

1085

20.0

Al. Bronze

Weight: 72 lbs. Shaft size: 28 mm Max. Temperature: 160 oF

Port sizes:

Pump Model Inlet Port Discharge Port
All (2) 1” NPT (2) 3/4″ NPT

GIANT LP Series Pumps


LP301

LP1000

LP700

LP301

LP1000

LP700

Giant LP Series – High Pressure


Pump Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End

Note

LP1000

3.4

15000

1000

35.2

S.S

LP700

7.9

7250

1000

39.8

S.S

LP600

9.7

6000

1000

40.4

S.S

LP301A

14.1

4000

1000

50.0

S.S

LP400

15.1

3600

1000

37.6

Al. Bronze

LP301A*

18

4000

1270

49.7

S.S

LP200

19.0

2900

1000

38.4

Al. Bronze

LP450

19.7

2600

1000

35.5

Al. Bronze

LP350

22.6

2350

1000

36.1

Al. Bronze

GIANT LP Series – High Flow


Pump Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End

Note

LP250

26.0

2200

1000

39.7

Al. Bronze

LP255

26.0

2200

1000

39.7

Brass

LP122A

39.0

2000

885

56.3

Al. Bronze

LP123

39.0

2000

885

56.3

Brass

* Intermittent duty only

Weight: 116 lbs. Shaft Size: 35mm

Max. Temperature: 140 degree F (104 F for LP1000)

Inlet Port & Discharge Port:

Pump Model Inlet Port Discharge Port
LP200/LP301A/LP600 (3) 1-1/4″ BSP (2) 1″ BSP
LP350/LP400/LP450 (2) 1-1/4″ BSP (1) 1″ BSP
LP700 (2) 3/4″ NPT (2) 1/2″ NPT
LP1000 (3) 1/2″ BSP (2) 3/8″ BSP
LP122/LP122A-4000/LP123 (2) 1-1/2″ NPT (2) 1″ NPT
LP250/LP255 (3) 1-1/2″ BSP (3) 1″ BSP

GIANT GP Series Pumps


GP7124A

GP7255A

GP7124A

GP7255A

 

GIANT GP Series – High Pressure


Pump Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End

Notes

GP7122

9.9

10150

750

69.3

S.S

GP7124A

12.7

7250

750

65.7

S.S

GP6124

12.8

5800

800

53.1

S.S

GP6128

18.0

4000

800

51.0

S.S

GP7132

23.4

4350

750

73.0

S.S

GP7136

28.3

3650

750

73.0

S.S

GP5132

27.7

2900

1000

60.0

Cast Iron
GP51 weight: 179 lbs Shaft Size: 35mm Max. Temperature: 140 oF
GP61 weight: 309 lbs Shaft Size: 42mm Max. Temperature: 140 oF
GP71 weight: 374 lbs Shaft Size: 48mm Max. Temperature: 140 oF

GP Series – High Flow


Pump Model

Max. GPM

Max. PSI

Max. RPM

Req’d BHP

Fluid End

Note

GP5136

33.8

2300

960

53.1

Cast Iron

GP5145

43.5

1500

750

44.8

Cast Iron

GP7150A

54.5

1900

700

74.0

Al. Bronze

GP7155

65.8

2000

700

55.3

Al. Bronze

GP7255A

66.0

2000

700

94.3

Cast Iron
GP51 weight: 179 lbs Shaft Size: 35mm Max. Temperature: 140 oF
GP61 weight: 309 lbs Shaft Size: 42mm Max. Temperature: 140 oF
GP71 weight: 374 lbs Shaft Size: 48mm Max. Temperature: 140 oF

Inlet Port & Discharge Port:

Pump Model Inlet Port Discharge Port
GP5132/GP5136/GP5145 (2) 1-1/2″ BSP (2) 1″ BSP
GP6124/GP6124-4000/GP6128 (2) 1-1/2″ BSP (2) 1″ BSP
GP6132/GP6140/GP6145/GP6145-4000 (2) 2-1/2″ NPT (2) 1-1/4″ NPT
GP7122 (2) 1-1/4″ BSP (2) 3/4 ” BSP
GP7124A/GP7128/GP7132 (2) 1-1/4″ NPT (2) 3/4″ NPT
GP7136 (2) 1″ NPT (2) 1-1/4″ NPT

 

 

Permanent link to this article: https://etscompany.com/wordpress/2011/07/11/giant-pumps-parts-and-kits/

Jul 11 2011

HYPRO 9910-D30 Diaphragm Pump

HYPRO 9910-D30 Diaphragm Pump

Hypro medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides, liquid fertilizers, and many other hard-to-handle fluids. Low-cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs.

Pressure and output are designed for optimum performance of small to medium-sized sprayers. Hypro medium pressure diaphragm pumps can be adapted for male 1-3/8″ splined shaft, female 1-3/8″ splined shaft, 1″ solid shaft, or gear reduction drive options. Pumps include a pulsation dampener.

List Price: $969.00

Our Price: $632.39 Click to purchase

You save $336.61!

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/11/hypro-9910-d30-diaphragm-pump/

Jul 11 2011

GENERAL PUMP,T SERIES 47, – TS2021

GENERAL PUMP,T SERIES 47, – TS2021

To order Click Here

For Pump Breakdown Click Here

FEATURES

• The preferred pump frame in the pressure cleaning industry

• Forged brass manifold with an exclusive lifetime warranty

• Large-capacity, die-cast, anodized aluminum oil-bath crankcase

• Over-sized connecting rods for maximum life

• Heavy-duty tapered roller bearing.

• Solid ceramic plungers with continuously lubricated packings

• Unitized stainless steel inlet and discharge valves

• Available in left-handed “L” version

List Price: $824.00

Our Price: $634.07

Sale Price: $612.00 To order Click Here

You save $212.00!

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/11/general-pumpt-series-47-ts2021/

Jul 08 2011

HYPRO Pumps, New and Replacement Pressure Washer Pumps

HYPRO Piston Pump Replacements

Hypro Corporation’s Twin® piston and plunger pumps are used in a variety of spraying and pressure cleaning applications, as well as hydrostatic testing. These heavy-duty pumps are ideal for fluid handling of water and nonabrasive or general use chemicals. All pumps are constructed from cast iron materials. They feature stainless steel valves and ball bearing, leather or fabric-reinforced Buna-N or straight Buna-N cups. You can choose from a variety of drive systems to include: belt and pulley, 540 rpm PTO, gasoline engine or electric motor. These pumps are available in a variety of flow and pressure ranges up to a maximum of 10 gpm and 1000 psi, with maximum fluid temperatures of 140°F (piston pumps) and 180°F (plunger pumps).

All of the Hypro piston and plunger pumps share these quality features:

• Nonabrasive and general use chemical compatibility

• Compact, lightweight and easy to install

• Replaceable leather cups for insecticides, herbicides and aromatic solvents

• Replaceable Buna-N and fabric reinforced Buna-N cups for water, soap and detergent solutions

• They are bi-rotational

• Self priming operation (piston pumps)

See Piston Pump Catalog here for detailed pump information
PISTON PUMPS

*This requires a “special order” gas engine with a 5/8″ shaft.

See Piston Pump Catalog here for detailed pump information

See Hypro Plunger Pump brochure for detailed Plunger Pump information

( See also Hypro Industrial Plunger Pump Brochure )
PLUNGER PUMPS
PowerLine PLUS 2200B-P Duplex Plunger Pumps
PowerLine PLUS 2300B-P Triplex Plunger Pumps
PowerLine PLUS 2400B-P and 2430B-P Triplex Plunger Pumps with Gearbox
2401B-P
2345B-CP
2200B-PU3
2431B-G2P
2433B-G2P
2231B-HPU3

See Hypro Plunger Pump brochure for detailed Plunger Pump information

( See also Hypro Industrial Plunger Pump Brochure )

Agricultural ROLLER Pump Models available:

Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids. The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Construction features include a cast-iron, Ni-Resist or the new SilverCast™ body and rotor, 416 stainless steel shaft, sealed factory-lubricated ball bearings, cartridge-type lip seals of Viton, Buna-N or leather, and versatile Super Rollers. (Super Rollers feature the life of polypropylene and the chemical resistance of nylon.) Rotation for all models is counterclockwise for easy tractor PTO drive, except models 4001 and 4101 which are clockwise. Pumps are available in reverse rotation.

See Hypro Roller Pump Brochure for detailed Roller Pump information

*Cast iron and XL versions are available. Call us Toll Free 1-877-824-7763 for details.

See Hypro Roller Pump Brochure for detailed Roller Pump information

New HYPRO Diaphragm Pumps

Diaphragm pumps are the most complete line of pumps available for spraying and pumping of herbicides, pesticides, liquid fertilizers and hard-to-handle fluids! Hypro offers a wide range of flows and pressures for slurries and suspensions. Pressures for row crop to treetop spraying applications range from 20 to 725 psi (1.4 to 50 bar) with flow rates from 3.5 to 66 gpm (13.2 to 249.8 lpm).
Low-cost maintenance and almost wear-free operation result from Hypro’s oil-bath design, premium quality, synthetic diaphragms for longer life, self-priming operation and visual, oil-level sight glass. These models can handle fluids up to 140°F (60°C) and can be run dry. Hypro diaphragm pumps can be driven by 540 rpm PTOs, 3 to 25 hp gasoline engines, or hydraulic motors.

HYPRO Low Pressure Diaphragm Pumps

Low Pressure

 

HYPRO Medium Pressure Diaphragm Pumps

Medium Pressure

HYPRO High Pressure Diaphragm Pumps

High Pressure

 

Permanent link to this article: https://etscompany.com/wordpress/2011/07/08/hypro-pumps-new-and-replacement-pressure-washer-pumps/

Jul 08 2011

Backboards wood brightner and deck cleaner

BackBoard Wood Brightener

BACKBOARDS™ is a mild acidic clear liquid wood restoring detergent. BACKBOARDS™ restores wood surfaces discolored by years of exposure to weathering elements. BACKBOARDS™ readily transforms old gray or blackened, moldy wood to its original appearance. BACKBOARDS™ dramatically reduces cleaning efforts and time allowing more effective restoration than pressure water blasting alone. BACKBOARDS™ and a gentle 500 to 1000PSI flush rinse eliminates gouging, splintering, furring, stop/start, overlapping marks and deep injections of water into the vulnerable wood fibers. BACKBOARDS™ is recommended for cedar, pressure treated, redwood and other types of wooden decks, shakes, roofs, fences and log cabins.
DIRECTIONS: Dilute with water as specified in the following ratios:
Wood restoration: Pressure washer cleaning: Full Strength or dilute up to 3 to 1 with water. Manual Scrubbing: Full Strength.
Mild Masonry Brightening: Full Strength Rust Stain Removal: Full Strength
RESTORATION TIPS -Ultra high pressure (greater than 2000 PSI) damages wood fibers. -DO NOT BLEACH! Sodium Hypochlorite solutions soften, raise the grain, and splinter wood fibers. Bleach also forms a film that deters follow up preservative penetration. Bleach and wood do not get along! -Use cold or warm water to pressure clean. Hot water softens wood causing fiber damage. -If a previous wood treatment is evident, a chemical stripper may first be required. Call ETS. -Follow up the wood restoration with a full bodied, replenishing wood preservative. Call ETS.
APPLICATIONS
Wood Restoration: Sweep or brush surface to be cleaned. Dampen wood surfaces with a water spray Generously apply Backboards by brush or garden pump sprayer. Agitate the surface with a medium bristle brush. Allow to set 15-20 minutes. If surface is drying, keep damp with a water mist spray. Gently flush rinse with a pressure washer to reveal a restored surface. If rinsing with a garden hose, additional scrubbing may be required. Mild masonry restoration and rust stain removal: Apply full strength let set 10-15 minutes, scrub if necessary, pressure rinse.
COMMENTS: Protect adjacent surfaces and plant life with light plastic draping. Mix well before using. Backboards is a saturated solution of high solids. Store above 50°F to prevent crystals forming on bottom of container. Warm the solution or dissolve crystals in hot water. Crystals will not effect products performance.

BACKBOARD, CONCENTRATE INDUSTRIAL CLEANING COMPOUND WOOD RESTORER LIQUID 1 GALLON *003

List Price: $9.50

Our Price: $9.50 Click to Order

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/08/backboards-wood-brightner-and-deck-cleaner/