The LANDA Part # – 8.917-700.0 is a banjo bolt used on almost every LANDA made pressure washer for repair. The piece is also very universal on other machines that LANDA private labels. Please check your repair manuals for this part number or the non formatted version of 89177000.
This LANDA Part # – 8.917-700.0 is a shorter banjo style bolt measuring about 1/2 inch. It has a 1/4″ NPT port for connecting to your pressure washers. The unit is made of solid brass and can withstand even the harshest situations you can put your machine through.
LANDA Part # – 8.917-700.0
LANDA Part # – 8.917-700.0 is a threaded type of connector which you can clearly see in the photo above.
You can check your machines repair / breakdown manual here to see if this part is used on it, or you can give us a call to inquire about this or other LANDA Parts you might need for your machine. Call 1-877-824-7763 {Smart Phones Click to Call} You can also find other Karcher / Hotsy Machines this part may be used on by clicking here.
This item alone does not qualify for our everyday sale of 5% off of $50.00, but if you add more parts from your machines repair manual you might be able to apply the code “5off” to get an additional 5% off your subtotal of $50.00 or more.
Permanent link to this article: https://etscompany.com/wordpress/2017/11/09/landa-part-8-917-700-0/
The AR Blue Clean Power Washer AR390SS from Annovi Reverberi, is a residential style pressure washer with the power and performance of a commercial machine. This electric power washer has a maximum PSI of 2000 and a flow rate of 1.4 GPM.
These AR Blue Clean Power Washer AR390SS gives you the cleaning power that is about 30 times stronger than your average garden hose in your home with a small price tag. Good garden hose of over 150 feet with a good nozzle will run you almost $100.00 and most likely won’t do the job you need it too and will have to be replaced every few years. This pressure washer is under $300.00 and will do the jobs you need it to do in half the time and will work for years with very little maintenance.
AR Blue Clean Power Washer AR390SS
AR Blue Clean Power Washer AR390SS is an electric powered power washer that works much more quietly than other gas powered units purchased at your local big box stores like home depot and lowes with the same amount of performance at about half the price.
This pressure washer has the following specifications:
• The unit is run by a 14 Amp/1.6 HP Universal Motor and Tri-Axial Pump delivering 2000 PSI/1.4GPM
• Power washer comes with a Pro-style spray gun, zinc steel lance and Quick-Coupler nozzle fitting
• Unit also comes with QC nozzle tips: 0 degree, 25 degree, Soap and Rotary/Turbo nozzles for desired cleaning applications
• 30’ High Pressure Hose is included on the unit.
• Functional, pressurized hose reel comes standard
• A 35’ power cord featuring Auto-Reset GFCI module
• User-friendly swivel power cord release
• Integrated 48 oz. detergent tank for easy detergent applications
• On-board storage for easy set-up and accessory storage
Need to fix one of these you already own? Find all our Annovi Reverberi Repair / Breakdown Manuals here.
Or just give us a call and we will be happy to assist you in figuring out if this is the best power washer for your homes needs. Call 1-877-824-7763 {Smart Phones Click to Call}
You can also order this pressure washer directly by clicking here.
Permanent link to this article: https://etscompany.com/wordpress/2017/11/03/ar-blue-clean-power-washer-ar390ss/
Annovi Reverberi Repair Kit AR2864 is the main valve repair kit you will need to fix your RK, RKA, RCW or RW pump that is made by AR Pumps. This repair kit is complete with everything you will need to repair one of these pumps, at least for the valves. It contains six o-rings and six valves, so you will only need one kit per pump.
The Annovi Reverberi Repair Kit AR2864 has parts that are made from the best rubber and plastic as well as steel to give these replacement parts long life and exceptional water tightness.
Annovi Reverberi Repair Kit AR2864
The Annovi Reverberi Repair Kit AR2864 has the following items included in it:
- Quantity of six of the part number – 31389051 which is the Complete Valve.
- It also has a quantity of six of the part number – 880830 which is the O-Rings.
If you are not sure if this repair kit for AR Pumps is the correct one for your pressure washers pump, find your pumps repair / breakdown manual here and verify that this is indeed the right fix for your machines pump.
If, after checking above link for your Annovi Reverberi pumps repair part, you are still not sure if this is the correct fix, give us a call toll free and we will be happy to assist you. Please be sure to have your Pumps model number before you call. It will always begin with letters and usually 3 or 2 followed by numbers. Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order this valve repair kit? Do so by clicking here to quickly and easily order on our e-Commerce site.
This items is priced to move with the best discounts you will find on AR Pump repair kits. However, if you add something like Oil or another small item to bring your total to over $50.00 you will then be able to get an additional 5% off with our Everyday sale of 5% off over $50.00. Just use the code “5off” in the coupon code field at check out to get your additional savings.
Permanent link to this article: https://etscompany.com/wordpress/2017/11/02/annovi-reverberi-repair-kit-ar2864/
The Cat Pumps 33060 Valve Kit for – 5CP3120 Pump from Cat is the kit you will need to repair this unit on your pressure washer. It’s a common kit and easy to replace yourself to get your pump back up and running fast. Perfect for the DIY-er.
You will need 2 of this Cat Pumps 33060 Valve Kit for – 5CP3120 Pump in order to completely repair this part of your pump. The kit has all the pieces including the o-rings to do the repair.
Cat Pumps 33060 Valve Kit for – 5CP3120 Pump
As seen in the photo above the Cat Pumps 33060 Valve Kit for – 5CP3120 Pump has the following:
- 6 – o-rings
- 3 – cat pumps valves.
Again if you are doing this repair yourself, which you can easily do you will need to order two of these kits to replace all the valves on your 5CP3120 pump.
This kit is also used on the 5CP5210 pump from CAT as well. Not sure what pump you have or if this is the right kit for your needs. Find all the repair / breakdown manuals here for CAT, to see if this is the valve kit for you. Once you know it’s the right kit, order it here fast and easy. Don’t forget to order 2 of them!
Not sure if your looking at the right repair kit, give us a call with your CAT Pump Model number toll free and we will figure out the best fix for your unit. Call 1-877-824-7763 {Smart Phones Click to Call}
The best news about this kit is, that it does qualify for our Everyday 5% off sale. So go here and order 2 of them and then at check out put the code “5off” in the coupon field and you will get an additional 5% off your subtotal.
Permanent link to this article: https://etscompany.com/wordpress/2017/10/31/cat-pumps-33060-valve-kit-5cp3120-pump/
The Comet Pumps – 8108.2532.00 Unloader – VRT-3, is a pressure regulator that senses when your pressure washer pumps gun is in the standby or off position. It diverts excess pressure into a bypass mode so no damage from excessive pressure gets to your pump.
This Comet Pumps – 8108.2532.00 Unloader – VRT-3 is rated for pressure washer pumps that have a flow rate of 8.0 GPM and a maximum PSI of 4500. It is vital to have a working unloader on your pump, because if the pressure builds up too much in your pump you risk damaging the unit and then replacement would be the only option. An unloader is a lot cheaper to replace on your pressure washer than the entire pump.
Comet Pumps – 8108.2532.00 Unloader – VRT-3
The Technical Specifications of the Comet Pumps – 8108.2532.00 Unloader – VRT-3 are:
- 8.0 GPM
- 194° F Max
- PSI 4500
- Inlet 3/8″ FPT
- Outlet 3/8″ FPT
- Color Black
- MV #0215010320
Need to repair instead of replacing it? Find this unloaders repair / breakdown manual by clicking here. Find your part or kit and then order it here. You can also order it over the phone by giving us a call toll free by clicking our number here: Call 1-877-824-7763 {Smart Phones Click to Call}
Or, order this entire unloader by clicking here, to get your comet driven pressure washer pump back up and running.
This unloader does qualify for our Everyday sale of 5% off of $50.00. Just use the code “5off” at check out to get even more savings!
Permanent link to this article: https://etscompany.com/wordpress/2017/10/30/comet-pumps-8108-2532-00-unloader-vrt-3/
The Cat Pumps 34053 Seal kit for 2SF pumps is the most common seal kit for 2SFX and 2SF Pumps that are made by CAT. When there is leaking in your pump the seals are the first thing you should look into. They are the easiest thing to wear but luckily the easiest thing to replace as well.
This picture below is of the Cat Pumps 34053 Seal kit for 2SF pumps. You will see it has most of what you need to repair your pressure washer pump and the cost is way more acceptable than purchasing a whole new pump.
Cat Pumps 34053 Seal kit for 2SF pumps
The kit contains the following items:
O-rings and rubberized seals to fix one pumps wet end.
You will only need one kit per any 2SF or 2SFX CAT Pump you may have.
Not sure if this is the right repair kit for your pump, check out our repair / breakdown manuals here to see if it’s listed as a repair kit. Don’t see the kit listed or just not sure about what is wrong with your pump, give us a call toll free and we will help you determine the correct fix for your CAT pump for your pressure washer. Most times it’s much more economical to repair these pumps then replace them as CAT Pumps can be very expensive. Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order the Cat Pumps 34053 Seal kit for 2SF pumps? Click here to quickly and safely order this kit today from our e-Commerce store.
This kit does qualify for our 5% off $50.00 everyday sale. Just add the coupon code “5off” in the field at checkout and get an additional 5% off your subtotal.
Permanent link to this article: https://etscompany.com/wordpress/2017/10/27/cat-pumps-34053-seal-kit-2sf-pumps/
The General Pumps – K04 – KIT 4 – Valve Brass Caps is one of the most common repair kits made for general pumps. It’s used primarily on the T and TS series of pumps made by general.
This General Pumps – K04 – KIT 4 – Valve Brass Caps come in a kit that has six brass caps that have a part number of 98222000 and six o-rings that are identified as 90384700 and measure .797 X .103. You will need one kit per pump you are trying to repair.
General Pumps – K04 – KIT 4 – Valve Brass Caps
As always please check your pumps repair / breakdown manual before ordering any parts to verify this is the correct repair kit you need. You can click here to see your pumps manual and check if the General Pumps – K04 – KIT 4 – Valve Brass Caps is indeed used on your pump.
You can always call us if you are unsure of what pump you have or if this kit will work for your repair. Please try to have your pumps model number or at least it’s PSI and GPM info. With out this it will be hard for us to identify your unit. Call toll free: Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order and get back up and pressure washing with your general pump driven machine? Click here to order this kit.
This kit qualifies for our 5% off $50.00 everyday sale! Just add the coupon “5off” in the field at check out and you will get an additional 5% off your subtotal.
Permanent link to this article: https://etscompany.com/wordpress/2017/10/25/general-pumps-k04-kit-4-valve-brass-caps/
The AR Annovi Reverberi R6010A Electric Motor is a 1750 rpm, 3 phase unit made to work with most AR pumps. This motor is 7.5 HP with a shaft diameter of 1 – 1/8″ for mounting to your machines. The units connector box is on the top of the motor and it’s construction of anodized metal, makes it strong and able to stand up to chemicals normally used around machines that require a motor.
This AR Annovi Reverberi R6010A Electric Motor is used in a variety of situations so it’s built to deliver power and pressure so no matter what your using it for it will stand up to the use and abuse.
AR Annovi Reverberi R6010A Electric Motor
The features of this AR Annovi Reverberi R6010A Electric Motor are:
- RPM of this motor is 1750
- Thermal Protection is available On request
- Voltage for this model is 230/460V
- Enclosure made from TEFC
- Phase is a 3
- Service Factor: 1.0
- Hertz is 60
- Frame is NEMA 213
- Full Load Amps are 22.4/11.2
- Bearings: KBC 6306ZZ/2pcs
- Weight is only 88 lbs
Not sure if your AR pump works with this motor? Find your pumps manual and or breakdown by clicking here. Still not sure if this is the right motor for the job? Give us a call and we will be happy to help you determine the correct model for your needs. Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to purchase this motor? Click here to order it from our eCommerce store.
Every pump we sell from AR does qualify for our everyday sale of 5% off of $50.00! Just add the code “5off” to the field at check out on our store and you will get an additional 5% off your subtotal.
Permanent link to this article: https://etscompany.com/wordpress/2017/10/24/ar-annovi-reverberi-r6010a-electric-motor/
The CAT Pump 7535 Pressure Unloader is designed for CAT Pumps that have a maximum flow rate of 21 gpm at a PSI of 4000. The minimum PSI is 800. Then unloader is for a single or multiple pump set up with either a weep or multiple nozzle machine. This unit relays on a 5 to 10% bypass for creation of the optimal unloader performance.
This CAT Pump 7535 Pressure Unloader will maintain the pressure and go into a bypass mode when the trigger of your pressure washers spray gun is released, or if there is some type of external blockage in the downstream of the hose.
CAT Pump 7535 Pressure Unloader
The features of this CAT Pump 7535 Pressure Unloader are:
- Maximum Flow rate is 21 gpm
- Minimum Pressure on the unloader is 800 psi
- Maximum Pressure output of the unit is 4000 psi
- Inlet Port Size measures 0.5
- Discharge Port Size has a measurement of 0.5
- Type of Accessory is a CAT Unloader
- Material of the bodies construction is Brass (BB)
Not sure if the CAT pump you have will work with this unloader? Or need to repair this unloader? Find the repair manual / breakdown of your pump or of this unit to see if it will work for you or for parts for getting the unloader back up and running with out having to replace the whole unit.
Still not sure if the CAT Pump 7535 Pressure Unloader is correct? Just give us a call toll free and a CAT Pumps specialist will help you out. Call 1-877-824-7763 {Smart Phones Click to Call}
Order this unloader here on our secure eCommerce site.
This unloader from CAT Pumps does qualify for our everyday sale of 5% off of $50.00. Just use the code “5off” in the coupon field at check out to get an additional 5% off your subtotal.
Permanent link to this article: https://etscompany.com/wordpress/2017/10/23/cat-pump-7535-pressure-unloader/
The Annovi Reverberi Accessory – AL-QCOKIT3/8 is an o-ring kit, that comes with 25 o-rings that measure 3/8″. These o-rings are used in a number of places on a number of different pressure washer pumps from Annovi Reverberi.
Annovi Reverberi Accessory – AL-QCOKIT3/8
This Annovi Reverberi Accessory – AL-QCOKIT3/8 seen above is made of Buna Rubberized material for long lasting use even in the harshest of environments. Even though they are durable, it is one of the most repaired parts of your pump, so be sure to stock up on a few of these kits so you are never without them for a quick on the job repair.
Not sure if your pump uses the o-rings from this Annovi Reverberi Accessory – AL-QCOKIT3/8? Just find your pumps breakdown / repair manual here and see. They should work on most pressure washer pumps AR makes, but if your can’t find your manual above or are still having issues, give us a quick call and we will be happy to help you determine if this is the right sized o-rings your need for in the field fixes. Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order this Annovi Reverberi Accessory – AL-QCOKIT3/8? Do so by clicking here and ordering one or more from our secure eCommerce store.
Permanent link to this article: https://etscompany.com/wordpress/2017/10/20/annovi-reverberi-accessory-al-qcokit38/
