K06 also known as General Pumps kit 6 is the complete piston and bolt assembly repair kit for most general pumps on the market today, used on a host of top of the line pressure washers. If you pressure washer is running a general pump, odds are this is the piston bolt kit you need to fix it.
The K06 repair kit contains everything you need to repair three cylinders on your general pressure washer pump.
k06 – kit 6 piston and bolt assembly
Need to be sure you are ordering the right repair kit for you pump? Find your general pump repair manual (also called a pump breakdown) by clicking here. Once you find your pumps manual look to see if the K06 is the repair kit you need for your cylinders.
The K06 Kit contains the following repair items:
- 3 O-rings that measure (0.426 x 0.070) part number 90.3585.00
- 3 of the Washer (M14) part number 96.7286.00
- 3 Ring (back up) part numbered 90.5067.00
- 3 of the Washer part number 96.7280.00
- 3 Screws (plunger) with a part number 47.2195.66
Not sure if this repair kit is the right item for getting you back up and running? Give our General Pump specialist a call and we will be happy to assist you in determining the correct kit for your piston repair. Call 1-877-824-7763 {Smart Phones Click to Call}
As always remember that if your order is over $50.00 you can add the coupon code “5off” to get 5% off your subtotal.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/21/general-pumps-kit-6-k06-piston-bolt-assembly/
Part # PULSAR4KHPEZ is a General Pumps unloader replacement part that is used on pumps for your pressure washer that require 10.5 gallon per minute flow rate with a maximum pressure rating of 4500 PSI.
This unloader PULSAR4KHPEZ is a trapped pressure type unit, that is used on most General Pumps and pressure washers that use these types of pumps. It is a blue spring type in the PULSAR4 series and comes standard with and EZ start knob and valve.
PULSAR4KHPEZ unloader
This PULSAR4KHPEZ unloader has the following specifications:
- The maximum GPM is rated at 10.5 GPM.
- The unloader is Rated at 4050 PSI.
- The Max. PSIof the unit is 4500.
- This unloader has an Inlet measurement of 2 x 3/8″ NPT.
- Outlet on this unloader is 3/8″ NPT.
- Bypass of the unit is measured at 2 x 3/8″ NPT.
- The Max. operating temperature of the unloader is 195 Degrees Fahrenheit.
Please check your General Pumps repair manual or parts breakdown here to determine of the PULSAR4KHPEZ unloader is the correct replacement unit for your pressure washer by clicking here and finding your pump model.
Not sure if this is the correct item for your pump and machine? Give us a call toll free and a General Pump Specialist will be glad to assist you in determining the correct unloader for your pump. Call 1-877-824-7763 {Smart Phones Click to Call}
If you are sure the PULSAR4KHPEZ unloader is the correct piece for you pressure washer pump them order it securely by clicking here.
Also, remember that we always offer one of the best coupon codes around that never expires. Use code “5off” to get 5% off any order that is over $50.00.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/20/general-pumps-pulsar4khpez-unloader/
The Daily Special & Coupon that is always in effect at shopetsonline.com is one of the best around when you’re looking to repair your pressure washer or its pump.
5% off of every order over $50.00 when you use the coupon code “5off” at the checkout is our best daily special & coupon all time on our eCommerce store. Whether you need a new pump for your pressure washer or a kit or repair part as long as the subtotal is over $50.00 you can get an extra 5% savings.
Daily Special & Coupon from ShopETSonline.com 5% off $50.00
Now while you can not use the Daily Special & Coupon from shopetsonline.com on new pressure washers or items that are already marked as free shipping, it can be used on over 99,000 other items you may need to get your pressure washer up and running. Whether you need a new pump from Annovi Reverberi, Cat Pumps, Comet, Hypro, General, Giant, Shurflo, or even Mi-T-M and Landa this coupon code could save you hundreds of dollars in the long run and means you don’t have to get used to a new machine.
The Daily Special & Coupon from shopetsonline.com is also valid on repair kits for any other the pump makes above, plus a host of other pressure washers. Companies like John Deere, Grainger use Mi-T-M parts on all of their machines and as such we have all the kits here for you to use, all at 5% off over $50.00.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/19/daily-special-coupon-shopetsonline-com-5-off-50-00/
AR1864 is a valve repair kit made by Annovi Reverberi for repairing its XM, XT and HPE line of pressure washer pumps. The kit comes complete with everything that you need to DYI and repair the 6 valves on one of these pumps.
The AR1864 valve repair kit is also used in repairing XMV3G32 series of pump, found in AR North Americas Pump Package XMV3G32-PKG. Best thing about this kit is you only need one of them per pump, it comes with everything to replace the valves that are leaking or broken.
AR1864 Valve Repair Kit
The AR1864 Valve Repair Kit comes with the following items:
- A quantity of six valves.
- The six o-rings you will need to re-seat the valves.
Not sure if you own a pump that this kit is used on? Find your pumps repair / breakdown manual by searching here for it and then seeing if the AR1864 Valve Repair Kit is on it.
Still can’t determine if this repair kit is the one that will get you up and running fast? Give one of our Annovi Reverberi pump specialists a call and they will help you determine the correct repair kit. Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to place that order for the AR1864 Valve Repair Kit? Do so easily and securely by clicking here to order it hassle free on our eCommerce site.
Also, don’t forget that all orders over $50.00 can have a coupon code added at checkout by you to receive an additional 5% off! Just use code 5off when on checkout page to have the discount apply.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/18/ar1864-valve-repair-kit-annovi-reverberi-pumps/
Hypro / Shurflo Pumps – 2088-573-143 Marine unit is a replacement pump with a high flow rate and moderate pressure. The pump is made to replace marine pumps that require a 4 GPM flow.
2088-573-143 pumps are made in a wide array of chemical resistant materials, are versatile enough to be mounted for use in any position and are very easy to repair should you need to fix it. This pump is also available in a number of voltages, ask us about that when you call. Call 1-877-824-7763
2088-573-143 pump
This SHURFLO® 2088-573-143 pump has the following specifications:
- The unit is a Self-Priming pump that is good up to 12 Vertical Feet [3.7M]
- Being made of Chemically Resistant Materials make this pump long lasting.
- Automatic Demand on the unit makes for quick start up and work flow.
- The pump has Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid into the machine.
Not sure if the 2088-573-143 pump is right for your needs? Give us a call and we will help you determine if this is the correct marine style pump for you. You can also look over our parts breakdowns / repair manuals here to see if you can fix this unit yourself if you already own it by clicking here. Don’t see your pump call us and we will get you your repair manual. Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order this 2088-573-143 pump? You can do so online and safe and securely on our site by clicking here. Also don’t forget to use our coupon code at check out. It’s always valid on purchases of $50.00 of more. Just enter the code “5off” on your cart page to get a 5% discount on the subtotal as long as the total purchase price is over $50.00.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/15/hypro-shurflo-pumps-2088-573-143-marine-unit/
RMV2.5G30D replacement pressure washer pump from Annovi Reverberi. This pump is for repair of pressure washers that have a flow rate of 2.5 gallons per minute and a maximum rating of 3000 PSI. The unit spins at a industry standard of 3400 RPM.
The RMV2.5G30D can connect to a direct drive system of a gas powered pressure washer that has a mounting shaft size of 3/4″. The pump is equipped with a built in chemical injector and has an installed pressure control valve all standard, making it the perfect replacement pump for most home pressure washers on the marked today.
RMV2.5G30D replacement pressure washer pump
The Rmv2.5G30D has the following specifications:
- The pump features a 3/4″ hollow shaft and operates at 3400 RPM, with a max PSI of 3000.
- This unit has a Max Flow (in GPM) of 2.5
- The Max Flow (in L/Min) is 9.5
- The pump has a Max Bar of 200
- Power of this unit in EBHP is rated at 4.3
- This pump has a Bore Diameter of 12mm
- Stroke on this unit is 9.7mm
- Crankshaft has an ID Stamp of 1
Check your pressure washer, you might already have an RMV2.5G30D installed on it. If this is the case and it has stopped working you may be able to repair this pump yourself. You can find the pumps breakdown / repair manual by clicking here. Or if you are not sure if this is the pump you have installed but want to try to fix it before you replace it you can find all the Annovi Reverberi Pump Breakdowns / Repair Manuals here.
Still not sure if you own or even can use a RMV2.5G30D pump? Just give us a call and we will be more than happy to assist you in figuring out what you have and what will work best for your pressure washer. Call us toll free at Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order? Do so by clicking here to order securely on our eCommerce site. Don’t for get to use coupon code 5off at checkout on all orders over $50.00 to get an additional 5% off!!
Permanent link to this article: https://etscompany.com/wordpress/2017/09/14/rmv2-5g30d-pump-annovi-reverberi/
K03 – Kit 3 from General pump is the shaft guide oil seal kit, that is used on most general pumps for repairing shaft seals of your pressure washers general pump. It is one of the more common repair parts / kits and is very do it yourself friendly.
This oil seal K03 – Kit 3 contains two pieces in it for this repair that measure 30 x 55 x 7 mm. Only one is needed for the shaft.
K03 – Kit 3
The K03 – Kit 3 Oil Seal Shaft kit works for the following pumps:
Fits General Pump Models:
| CW2004 |
CW2040 |
CW24 |
| CW3040 |
T1011 |
T1311 |
| T1321 |
T1511 |
T1621 |
| T1631 |
T5050 |
T9121 |
| T9131 |
T9161 |
T921 |
| T9211 |
T9281 |
T9321 |
| T9791 |
TS1011 |
TS1021 |
| TS1311 |
TS1321 |
TS1331 |
| TS1351 |
TS1511 |
TS1521 |
| TS1621 |
TS1711 |
TS2011 |
| TS2012SS |
TS2016SS |
TS2021 |
| TS821 |
TS921 |
TSF2021 |
| TSF2221 |
TSF2421 |
|
Fits Interpump Pump Models:
| W101 |
W131 |
W132 |
| W151 |
W162 |
W163 |
| W201 |
W203 |
W912 |
| W913 |
W916 |
W92 |
| W921 |
WS101 |
WS102 |
| WS131 |
WS132 |
WS133 |
| WS135 |
WS151 |
WS152 |
| WS162 |
WS171 |
WS202 |
Don’t see your pump above? Don’t worry, we have you covered! You can either check your pumps breakdown / repair manual here to see if this kit will work on your unit. Or you can give us a call today toll free and we will help you figure out if this is the correct repair kit for your pressure washer pump. Call 1-877-824-7763 {Smart Phones Click to Call}
You can also check out our General Pumps Site for almost every pump breakdown and repair kit as well and daily tweets by clicking here.
See that the K03 – Kit 3 General pump kit works on your unit? Then feel free to order it easily and securly on our eCommerce site by clicking here.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/13/general-pumps-oil-seal-kit-k03-also-called-kit-3-shaft-guide%e2%80%8e/
The general pumps kit 2, which is called K02 on most pump repair / breakdown manuals is for the piston guide repair of most General pumps. The kit is officially knows as an Oil Seal Piston Guide Kit.
K02 or kit 2 replaces the three oil seals in crankcase behind the pump head of yor general pump. The crankshaft seal is NOT included in this repair kit that needs to be ordered separately. This kit is also a replacement for the Graco Kit# 801473 on 3040 and 3235 pressure washers you may own.
General Pumps Kit 2 – K02 Oil Seal Kit
Not sure if the K02 or Kit 2 from General pump is the right repair kit you need or not sure what pump you have? Find all our pump breakdowns / repair kits by clicking here to see if this is the right fix for your pressure washer.
This K02 kit is designed to be used on (but not limited to) the following pumps:
- T1011
- T1321
- T1511
- T1621
- T2011
- T9131
- T9161
- T921
- T9211
- T9281
- TS1011
- TS1021
- TS1321
- TS1511
- TS1621
- TS1711
- TS2011
- TS2011
- TS2021
- TS821
- T5050
As well as the CW47 Series, Emperor, T47 Series, TSF & TSP 66 Series & HTS2215S. But, please check your pumps repair manual to be sure if you don’t see it listed above.
Still not sure if this K02 or kit 2 is right for your repair needs? Give us a call and a general pump specialist will be happy to assist you with all your questions about this kit. Call 1-877-824-7763
Ready to order and get your pressure washer back up and running? Do so by clicking here to purchase your kit today on our SSL e-Commerce site.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/12/general-pumps-kit-2-k02-oil-seal-kit/
The 8090-802-270 is a diaphragm pump from Hypro Pumps that is used for replacing a non working pump that has a 30 maximum PSI rating, at 180 degrees working temperature maximum.
This 8090-802-270 unit is self priming and weights in at only 4.7 pounds. It’s typical use is for soil extraction and has an rating of 80 PSI in bypass mode.
8090-802-270 Pump
The fasteners are made of zinc plated steel, and the valves are of the strongest viton making this 8090-802-270 Pumps durable both inside and out. Intermittent cycling and the 230 voltage rating make this unit one of the more versatile diaphragm pumps on the market today.
If you are not sure if the Shurflow 8090-802-270 Pump is the right unit for your machine, you can give us a call here toll free and we will help in assisting you with getting the right diaphragm pump for your needs. Call 1-877-824-7763
Are you a DIYer? If so you can find most pump breakdowns / repair manuals for Hypro and Shurflow by clicking here and finding your unit and ordering parts to repair it, instead of replacing it with a new one. Although, we would recommend just purchasing a new one most of the time, as the hours spent on assembling and disassembling the unit to repair it could extend your down time.
Ready to order a new one, call us above or order it securely online by clicking here: 8090-802-270 Pump
Permanent link to this article: https://etscompany.com/wordpress/2017/09/11/hypro-pumps-8090-802-270-diaphragm-pump/
This post is for the 5315C-X which is made from Hypro Pumps and is in there 5300 series of pressure pumps for sprayers. This assembly is designed for long life and will get your sprayer up and running fast.
The 5315C-X pump is rated for sprayers that need a flow rate of 1.5 gallons per minute and a maximum pressure of 500 PSI. It is also recommended for units that spin at no more that 1800 RPM.
5315C-X Pump from hypro pumps.
Hypro Pumps 5315C-X has the following technical specifications:
- The pump has a 1.5 MAX GPM
- 500 is the MAX PSI for this 5315C-X
- This unit spins at an 1800 MAX RPM
- The pump is made from cast iron for durability.
- The unit has a 5/8″ OD SOLID SHAFT for mounting
- This unit has 1/2″ NPT PORTS for inlet and outlet.
- 140 DEGREES F is the maximum operation temperature for this pump.
- The pump has a leather cup.
Parts Breakdown / Repair Manual
These pumps are perfect for non abrasive or general chemical spraying situations, the body is made of cast iron with the inside valves and parts being made of stainless steal. It also has leather reinforced seals making this perfect to get you back up an spraying for a long time.
Ready to order this unit for your sprayer or pressure pump? Please either call us at the number above or you can order it securely on our eCommerce site by clicking the link here: 5315C-X
Permanent link to this article: https://etscompany.com/wordpress/2017/09/08/hypro-pumps-5315c-x-5300-series-pump-assembly/
