550 Plunger Pump from CAT Pumps
The 550 replacement pump from CAT pumps is rated 5 gallons per minute flow rate with a maximum 3000 PSI. This CAT 550 Pump spins at about 1415 RPM. Everything about this unit from it speed, flow and pressure to its over all construction materials and methods lend this 7 frame, plunger style of pump to be one of the longest lasting pumps you will ever purchase on the market today. CAT Pumps has built this item to work with your pressure washer for years. They have thought of everything when trying to extend the life of this pump, from the forged brass head and die cast aluminum body down to the state of the art solid ceramic plungers and stainless steel valves. They even are using a special method of lubrication when it comes to the seals. The seals on the CAT 550 Pump are not only cooled by the pumps own pumping of liquid, but they are also continuously lubricated by this action as well. This pump truly has everything as part of it to make it be your last pump purchase for a very long time.
550 Plunger Pump from CAT Pumps
Here are a few more specification you might need about the CAT 550 Pump not mentioned above:
- The unit has a bore measurement of 0.630″ (16 mm).
- CAT 550 Pump has a stroke of 0.945″ (24 mm).
- The inlet pressure range when flooded is 60 PSI (Flooded to 4 BAR).
- Oil capacity of the crankcase is 25 oz. (0.75 L).
- Running temperatures up to 160°F (71°C) are not unheard of.
- For temperatures above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
- Two inlet ports that are 1/2″ NPTF (1/2″ NPTF).
- Two outlet ports that are of the type 3/8″ NPTF (3/8″ NPTF).
- The shaft diameter is 0.945″ (24 mm).
- Weighs in at only 25.5 lbs. (11.5 kg).
- Over all pump dimensions are 13.6 x 9.61 x 6.41″ (346 x 244 x 163 mm).
Parts Breakdown of the 550 CAT Pump
If your need more help deciding if the CAT 550 Pump is right for you give us a call at 1-877-824-7763 {Smart Phones Click to Call} or feel free to order the pump online by clicking the link below.
Permanent link to this article: https://etscompany.com/wordpress/2015/02/09/550-plunger-pump-cat-pumps/
RMV2.5G24D – (Alm) Pump from Annovi Reverberi
The RMV2.5G24D is a direct drive, vertically mounted replacement pump for your store bought pressure washer. It is meant to replace units with a 2.5 gallon per minute flow and a maximum PSI of 2400. This is one of those pumps that has been identified in many ways, just like a lot of Annovi Reverberi pumps. You may see it written like: RMV2.5G24D-(Alm), RMV2.5G24D, RMV2.5G24, RMV2.5G, RMV, RMV25G24D, RMV25G24, RMV25G, or even RMV25. Regardless of how it’s written, it is one of the best quality replacement pumps for your pressure washer on the market today. With a head of solid brass, an aluminum body, solid ceramic plungers and the best rubber, plastic and steel construction internal elements, this unit will last you and your business a long time.
RMV2.5G24D – (Alm) Pump from Annovi Reverberi
RMV2.5G24D Pump Breakdown from AR Pumps
Technical specifications you may also need on the RMV2.5G24D – (Alm) Pump from Annovi Reverberi:
- The maximum liters per minute is 9.5.
- A maximum BAR Pressure of 166.
- Has an EBHP power rating of 4.3.
- The bore diameter is 12mm.
- A stroke measurement of 9.7mm.
- Weighs in at 7.5 pounds.
- Has a maximum liquid temperature of 140°.
- The oil capacity of the crankcase is 2.2oz.
- Has one inlet thread measurement of 3/4”.
- Discharge Thread measures 22mm – garden hose type.
Not sure if your pressure washer that you purchases from the likes of The Home Depot, Sears, Lowes or Menards will be fixed with this power unit, don’t worry give us a call and we will figure it out for you. 1-877-824-7763 {Smart Phones Click to Call}
You can also order this item direct from our pressure washer parts supply store at the link below.
Permanent link to this article: https://etscompany.com/wordpress/2015/02/06/rmv2-5g24d-alm-pump-annovi-reverberi/
RKA4G30N pump from Annovi Reverberi
The RKA4G30N is a replacement pump for your pressure washer that needs 4 gallons per minute at 3000 PSI. This RKA4G30N is for machines that require at least 1750 RPM speed. The pump is one of the most versatile pumps that Annovi Reverberi makes, mounting to either gasoline or electric pressure washers that use gearbox, belt or even coupling drive systems to run their pumps. This item is built to last you years, probably longer than the original pump that came with your machine. It has a forged brass head and die cast metal body, as well as solid ceramic plungers, cooling fans of anodized aluminum and state of the art one piece designed connecting rods. For those of you who need metric rating of this RKA4G30N pump, they would be 15.1 liters per minute at a maximum BAR of 205.
RKA4G30N pump from Annovi Reverberi
Some other features you may like to know about the RKA4G30N Pump from AR Pumps:
- The unit has a power EBHP rating of 7.5.
- The pumps bore diameter is 18mm.
- Stroke of the unit is 12mm.
- Weighs in at around 19 pounds.
- The maximum liquid temperature you can run through the unit is 140°.
- Crankcase oil capacity is 15oz.
- One Inlet Thread that measures 1/2”F.
- A Discharge Thread that also measures 3/8”F.
RKA or RKA4G30N Pump from Annovi Reverberi
If you’re looking over your not working pressure washer and are not sure if this RKA4G30N is the correct style of pump for your unit, give us a call toll free and we will be happy to assist you in figuring out the right pump for your machine. 1-877-824-7763 {Smart Phones Click to Call}
You can also order this pump quick and easy on our online store by clicking the link below.
Permanent link to this article: https://etscompany.com/wordpress/2015/02/05/rka4g30n-pump-annovi-reverberi/
AR42118 Repair Unloader Kit from Annovi Reverberi
The AR42118 is an unloader repair kit from AR Pumps for your RMV, RMW or SRMW Pump. This AR42118 ships already assembled, but must be calibrated for your machine by you. As with a lot of repair kits from Annovi Reverberi this one can be written or talked about in many different ways, you may see it also described as AR 42118 or even AR-42118. No matter how you see it, it’s the kit constructed by AR pumps to get you back up and running fast. This unloader repair kit is built with the best materials and given the most care in manufacturing to ensure that this type of repair will last you a very long time. The unit itself is made from forged brass and stainless steel, and has the best quality rubber and plastic internal parts that could be purchased for its construction.
AR42118 Repair Unloader Kit from Annovi Reverberi
While this AR42118 comes completely assembled here is a list of parts you will find all included for you:
- Part number AR2760400 the Piston, quantity of one.
- AR2260100 an O-Ring in a quantity of one.
- One o-ring with a part number of AR660190.
- The ring AR2760210, quantity of one.
- A piston guide part numbered AR2840750.
- Four o-rings with a number of AR740290.
- O-ring number AR820510 times one.
- A By-Pass Jet that is number AR2840760, quantity of one.
- One seat numbered AR2840770.
- Another o-ring numbered AR1470210.
- A nut with a part number of AR1980300.
- Grub screw AR392840 times 1.
- The handle insert part number AR2760480.
- Two plate springs numbered AR1980220.
- One spring with a number of AR2760410.
AR42118 from AR Pumps
Need to see the AR42118 on your pumps breakdown? Click your pump here to print it off and locate the part for your reference. RMW, RMV, SRMW
Need more help with this item give us a call and we will be happy to assist you. 1-877-824-7763 {Smart Phones Click to Call}
Or feel free to order the item below from our online store.
Permanent link to this article: https://etscompany.com/wordpress/2015/02/04/ar42118-repair-unloader-kit-annovi-reverberi/
K125 – Kit 125 from General Pump.
The k125 or kit 125 as it may be written is the packing repair kit for a lot of General Pumps. This k125 / kit 125 is forged of solid brass and is paired with a rubber o-ring. The quality control in the making of this repair kit, that General adheres to makes this product one of those items that you will replace less often if you use the original OEM brand. Other brands might say they work, but none stand up to the precision manufacturing that this k125 goes through. By using this kit 125, this type of repair on this end of your pump will be easy and probably last your pressure washer a lifetime.
K125 – Kit 125 from General Pump
The kit 125 or k125 packing kit comes with:
- Solid brass forged packing.
- State of the art rubberized o-rings.
As we stated above this k125 is used on a number of different pumps made by General, so it’s a bit difficult to show you all the part breakdowns for each pump on this blog. But, what we do recommend if you want to try to figure this out on your own is go to the pump breakdowns page from General Pumps, locate your pump and see if this repair kit is the one you need.
Should you have trouble figuring out if this packing kit is the right one for your unit, we are always here to help. Do not get frustrated. Give us a quick call and one of our specially trained staff will be able to help you determine what packing repair kit you require. 1-877-824-7763 {Smart Phones Click to Call}
On the other hand, if you know this is the kit for your pump please click the link below to order it from our online store directly.
Permanent link to this article: https://etscompany.com/wordpress/2015/02/03/k125-kit-125-general-pump/
RMW2G25D Pump from Annovi Reverberi
This RMW2G25D is a direct drive pump from AR Pumps. The RMW2G25D is rated 2 gallons per minute at 2500 PSI and spins at 3400 RPM. This powerful little pump is built by AR pumps to be a replacement pump for your pressure washers that you might have purchased from a home improvement store such as The Home Depot or Lowes, that uses a vertical style of mount for its pump. This unit is built stronger and of better quality of materials than the pump that came with your pressure washer. The RMW2G25D is designed to be one of the last pumps you purchase for your unit, being constructed from die cast aluminum as well as forged brass the unit will hold up under even the harshest uses. It comes ready to mount to your pressure washer with a gas style flange and standard 3 bolt design. The unit also has a built in unloader valve and chemical injector already installed making your set up a breeze.
RMW2G25D Pump from Annovi Reverberi
More specifications you may need to know about the RMW2G25D Pump:
- The unit comes filled with oil in an aluminum crankcase.
- This pump has a solid brass head with valve covers, as well as stainless steel plungers.
- The RMV2G25D unit has has one inlet and one outlet port that measure 3/4″ GH and 22 mm respectively.
- This unit weighs only 7.7 pounds.
Breakdown for the RWM2G25D Pump from AR Pumps
Not really sure what pump your big box store purchased pressure washer needs? Give us a call and we will help you determine the correct pump for your unit. 1-877-824-7763 {Smart Phones Click to Call}
If you are sure this RMW2G25D pump will work on your store bought machine please order it online by clicking the link below:
Permanent link to this article: https://etscompany.com/wordpress/2015/02/02/rmw2g25d-pump-annovi-reverberi/
AR2869 kit from Annovi Reverberi.
The AR2869 is the valve repair kit for XJ and other series of AR Pumps. This AR2869 kit comes with everything you need to replace the valves on your unit, seven o-rings, three inlet valves and three discharge valves. This common repair kit has been identified by a few other names over the years, its been call the AR 2869 as well as the AR-2869, no matter how it’s written or how it’s searched for it is all the same great kit from AR Pumps. This valve repair kit is constructed of the best rubber, plastic and metal elements that AR can purchase to ensure a water tight seal on this end of your pump for years to come.
AR2869 kit from Annovi Reverberi
The individual items included in this AR2869 valve repair kit are:
- A quantity of seven o-rings with the part number of 880830.
- The discharge valve part numbered 1269050, in a quantity of three.
- Three inlet valves that are part number 1989050 on your parts breakdown.
You can see this kit and where it is used on your XJ series of pressure washer pump by clicking the parts breakdown here. Don’t have an XJ series of pump from AR, and not sure what valve repair kit you need? Go to our extensive list of Annovi Reverberi Pump Breakdowns to find you unit and view its breakdown and see what valves and kits you need by clicking here.
If you are still not sure if the AR2869 is the right kit for the repair you need to do, give us a call and we will be happy to assist you in figuring out what parts and kits you need to fix your pump fast and for the best price around. 1-877-824-7763 {Smart Phones Click to Call}
Ready to order? Do so easily by clicking the link below:
Permanent link to this article: https://etscompany.com/wordpress/2015/01/30/ar2869-kit-annovi-reverberi/
RSV3G30 Pump Package from Annovi Reverberi.
The RSV3G30 or RSV3G30-pkg is everything you need to replace your pump on your unit. This RSV3G30 pump package is made for the machine that requires 3 gallons per minute at 3000 PSI, and requires a maximum RPM of 3400. This package comes with everything you will need to easily replace your pump and get it up and running again. All the nuts, bolts, nipples and even the chemical hose are all included in the one kit from AR Pumps. The pump itself that is included in the package is the RSV3G30D-F25EZ, a powerful and well built machine. It has a brass forged head, steel gas flange, solid ceramic plungers and even comes with a built in unloader and easy start valve.
rsv3g30 pump package from Annovi Reverberi
Other features of this RSV3G30-pkg from AR Pumps:
- The pump spins at an RPM of 3400.
- Has a 3/4″ hollow shaft for connection to your pressure washer.
- Part number AR7365 the 3/8″M nipple is included.
- Includes an AR7366 – 3/4″F nut.
- Comes standard with the AR7369 – Inlet filter.
- The AL-QC3/8B – quick connect coupler for fast on and off connection is standard in the kit.
Already own a RSV3G30 pump package or RSV3G30D-F25EZ pump that has stopped working? Don’t replace the pump repair it with parts and kits. All the items you need to repair the inner workings of these pumps can be found on the RSV 3400 breakdown. Click here to view and print it.
RSV3G30 Pump Package Parts Breakdown.
Our company as been around since the 1970’s helping pressure washing companies keep their fleet up and running. Don’t deal with the big box stores that are just selling parts, come to someone who has the know how to keep your machines in top shape. Give us a call if your unsure if this RSV3G30-pkg is right for you or not. Those other stores won’t have a clue. Call 1-877-824-7763 {Smart Phones Click to Call}
You can also order this pump package just as easily on our online store by clicking the link below.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/29/rsv3g30-pump-package-annovi-reverberi/
RSV4G40 – PKG Pump Package from Annovi Reverberi
The RSV4G40 pump package from Annovi Reverberi comes with everything you need to get your pressure washer back up and running. The RSV4G40 – pkg is rated 4 gallons per minute with a maximum pressure of 4000 PSI. This package is set up to connect directly to your gasoline powered pressure washer with its standard gas flange, and the RSV4G40HDF40EZ pump that comes as part of this package spins at a very powerful 3400 RPM. This kit was put together by AR Pumps with ease in mind. They are giving your the 4 GPM pump, which has a built in unloader and easy start valve, all the connection pieces and even a detergent hose with its filter, so basically everything you will need. As with most AR pumps this RSV4G40 pump package is built to last with a forged brass head and solid ceramic plungers, it will give you years of service before it needs replacing.
RSV4G40 – PKG from AR Pumps
A few other things you may need to know about the RSV4G40-pkg:
- The AR7365 – 3/8″M nipple connector.
- An AR7366 – 3/4″F nut connector.
- Inlet filter part number AR7369.
- A quick connect coupler AL-QC3/8B.
If you already own this RSV4G40 pump package or the pump itself the RSV4G40HDF40EZ, and need repair parts and kits for it you can find those on the pumps breakdown that came with your unit. If you lost that manual and need to reprint it you can do so by clicking here.
RSV4G40-PKG Pump parts breakdown from AR Pumps
Do you still have some concerns if this is the right replacement pressure washer pump for your machine? Why don’t you just give us a call, and we will help you determine the correct item for your type of machine and work you are doing with it. 1-877-824-7763 {Smart Phones Click to Call}
Absolutely sure this is the right deal for you? The order this pump package on our online store below.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/28/rsv4g40-pkg-pump-package-annovi-reverberi/
SRMW2.2G26-EZ pump from Annovi Reverberi
The SRMW2.2G26-EZ pump is a front mounted replacement pump for under the engine pressure washers. This SRMW2.2G26-EZ is rated 2.2 GPM at 2600 PSI. This unit will work on almost any store bought home owner style of pressure washer that you may have purchased from either Menards, Lowes or even The Home Depot. These stores, in house repair centers actually stock this pump and its rear mounted facing cousin the SRMW2.2G-EZ-SX, to fix most of the pressure washers they stock. So why not do what they do and use the SRMW2.2G26-EZ to fix your pressure washer by yourself. This pump has a built in Easy Start system, making the cold start up of your pump a breeze and comes standard with a built in unloader and chemical injector. This unit comes filled with oil, so it’s as simple as taking off your broken pump, bolting this one on, hooking up your hoses and your pressure washing in no time flat.
SRMW2.2G26-EZ pump from Annovi Reverberi
A Few more things you might like to know about the SRMW2.2G26-EZ pump:
- This unit has a maximum horsepower of 5.2 GHP.
- The pump has stainless steel plungers and an all aluminum set of valves and manifold.
- An inlet port that is 3/4″ FGH style which is your standard garden hose type of mounting.
- The outlet port on the SRMW2.2G26-EZ pump is a twist connect style of mount measuring 22mm.
- Pump speed has a maximum rating of 3400 RPM.
- This pump has a 7/8″ hollow type shaft diameter.
SRMW2.2G26-EZ pump from Annovi Reverberi
Quick note, this pump can also be identified as the: SRWM, SRWM22G, SRMW22G26, SRMW2.2G or even the SRWM2.2G26. No matter how it’s identified it’s the same 2.2 GPM at 2600 PSI Pump you will need for most pressure washers. Have concerns? Give us a call and we can help you out. 1-877-824-7763 {Smart Phones Click to Call}
If your ready to repair you pressure washer yourself and save time and money order this pump online below.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/26/srmw2-2g26-ez-pump-annovi-reverberi/
