T991 Pump from General Pump.
The T991 is a powerful replacement Triplex style of pump from General Pumps. The T991 is rated 4 gallons per minute with a maximum pressure rating of 1100 PSI. For those of you that know General Pumps by their series this would be labeled a T Series 50 Pump. This unit is so well built it is covered by a lifetime warranty from General Pump. They put faith in the unit holding up, even under the harsh use most cleaners will put their pressure washers through. General can do this because the forge the head of this unit completely out of brass, and use a specially formulated and die-cast anodized aluminum for the body. Then, they couple this with solid ceramic plungers and packings or water seals that are totally self lubricating. All of this, and more give you the peace of mind that your purchase of this pump will give you 1000’s of hours of work before you need to repair or even replace this part on your unit again.
T991 Pump from General Pump
Here are some basic specification of the T991 Pump:
- The pump dimensions and weight are 9.3″ x 8.3″ x 5.4″ and 18.7 lb.
- Crankcase has an non-detergent SAE 30W oil capacity of 15.2 oz.
- Maximum speed of the item is 1750 RPM.
- Horsepower minimum requirements are 3.6 BHP, that is 1.5 times greater for gas powered units.
- A 165 degrees F. maximum liquid pump temperature.
- This T991 Pump has a stroke and bore of .394″ (10mm) and .787″ (20mm).
- The inlet ports is 1/2″ FPT and the one outlet port measures 3/8″ FPT.
This pump T991 is so well made its oil consumption is second to none. In fact, General Pump recommends the following when it comes to your oil: “Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 break-in period, then every 3 months or 500 hour intervals thereafter”.
Pump T991 Triplex from General Pump.
Do you have more questions about this unit? If so, give us a call toll free:
1-877-824-7763 {Smart Phones Click to Call}
Or if your ready to purchase this powerful little pump, do so by clicking the link below to order online.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/23/t991-pump-general-pump/
XMA2.5G18E-F33 Pump from Annovi Reverberi
The XMA2.5G18E-F33 is a 1750 RPM replacement pump from AR Pumps. The XMA2.5G18E-F33 has a 2.5 Gallon per minute flow rate and a maximum PSI of 1800. This is one of those Annovi Reverberi pumps that has been known to go by many other names on the market. It’s been known to be called the XMA2.5G, XMA2.5G18, XMA2.5G18E, XMA, XMA25, XMA25G, XMA25G18, XMA25G18E and the XMA25G18E-F33. Regardless of how it is identified, this is constructed like all the XM series of pumps with solid ceramic plungers, over sized bearings and forged brass heads to ensure longevity in the harsh conditions most pressure washers come up against.
XMA2.5G18E-F33 Pump from Annovi Reverberi
A few more specifications you may need before you purchase the XMA2.5G18E-F33 pump:
- The unit has a 140° maximum liquid temperature that it can pump.
- This pump has a weight of 15 pounds and an oil capacity of 14 oz.
- If you run metric the LPM is 9.5 and the BAR would be 120.
- EBHP power rating of 3 is standard on this XMA2.5G18E-F33 pump.
- The inlet and discharge threads are the standard measuring in at 1/2″ female and 3/8″ female respectively.
- Stroke and bore are also industry standard, measuring in at 10.6mm and 15mm each.
AR Pumps XMA2.5G18E-F33 Replacement Unit
We are here to help you decide if you should replace or repair your pumps on your pressure washers. Give one of our knowledgeable staff a call and we will guide you through the process of determining the best options for you and your business. Call 1-877-824-7763 {Smart Phones Click to Call}
Or you can order the replacement pump online by clicking below.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/22/xma2-5g18e-f33-pump-annovi-reverberi/
K109 – Repair Kit 109 from General Pump.
The K109 packing / water seal repair kit from General Pump, goes by may names. You may see the K109 written as k-109, k 109 or even kit 109. It really doesn’t matter how it’s written or said, it’s all the same high quality kit from General Pump you will need to use to fix the wet end of your pump. The seals, rings and packings on this 16mm repair kit are all made from the best material and are tested before, during and after production to ensure they meet and exceed the specifications General has set up for its pressure washer pumps. Basically, this means the K109 will last your machine for years before it has to be replaced again.
K109 – Repair Kit 109 from General Pump
The individual parts in this K109 Kit are:
- Three of part number 90264400, the 16mm low pressure seals.
- A quantity of three of the re-stop rings, part number 90264300.
- Part number 90264200 the actual packing / seal in a quantity of three.
While this is one of the most common repair kits from General Pump for it’s 16mm style of plungers, it’s always best to check your pumps manual / parts breakdown to verify if this is indeed the correct kit and how many you will need. Should you need to re-print that manual you can click here to find your pump and see if the K109 kit is part of its repair parts.
If you need any help in deciding if the K109 kit is the correct item for you give us a call at 1-877-824-7763 {Smart Phones Click to Call} and we will be there to assist you.
After you have talked to us, or have verified from the parts breakdown for your specific pump that this is the correct repair kit, you can order it directly online, by clicking the link below.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/21/k109-repair-kit-109-general-pump/
31285 Valve Repair Kit from CAT Pumps.
The 31285 kit is the first kit you should try when you need to repair the valve end of your CAT Pump. The 31285 contains all the valves needed to repair this end of your plunger style of pressure washer pump from CAT. This valve repair kit is the very first thing a repair shop will test or try when you bring your unit in for maintenance, so why shouldn’t you? This item is built for the fix it yourself type of person. All the valves come assembled, and all you have to do is remove the worn out ones and install these in their place. The 31285 kit, like all items from CAT Pumps are manufactured from the best materials and with the best precision to give the valve and the pump you are placing them on extra long life.
31285 Valve Repair Kit from CAT PUMPS
The items included in the repair kit 31285 are:
- Back-up-Ring for the seat part number 48363.
- O-Ring for the valve seat – 80D numbered 26142.
- Part number 48544 the Seat and 45839 the Valve.
- A Spring with a part number of 45840.
- The Retainer, Spring – 110682.
- 44794 The Washer / Spring Retainer.
- An O-Ring, Valve Plug – 80D with a part number of 17667.
All of these parts can also be purchased individually, but CAT Pumps recommends changing out all of the valves at the same time, so to make this easier they have created this special 31285 kit just for that purpose. If you are not sure if this is the right repair kit you need for your CAT Pump valves, click here to find your pumps breakdown of parts, to locate the valve replacements you may need. If you own a 2510 Pump, click here to download the parts breakdown to see location of the 31285 kit.
If, after looking at the above breakdowns, you’re still not sure about the kit you need. Give us a call and we will be happy to help you figure out if the 31285 kit is right for you and your pressure washer pump. 1-877-824-7763 {Smart Phones Click to Call}
You can also order this valve repair kit directly from us online by clicking the link below if you are sure it’s the one you need to fix your unit.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/20/31285-valve-repair-kit-cat-pumps/
AR2121 Kit from Annovi Reverberi Pumps.
The AR2121 is the bolt repair kit for the VR 3/B Unloader from AR Pumps. The AR2121 can be also known as the AR-2121 or even the AR 2121 bolt repair kit. Either way, it’s the repair kit you are going to need and use to reattach your unloader to your Annovi Reverberi Pressure Washer Pump. This kits elements are constructed with longevity in mind, like all AR parts. The forged brass connection bolts and high quality rubber o-rings will give this connection joint on your unit years of replacement free worry. Just so you are aware, you will only need one of this AR2121 kit to fix the connection of unloader to pump.
AR2121 Kit from Annovi Reverberi Pumps
The elements included in this AR2121 Repair Kit are:
- Two forged brass unloader bolts.
- Two larger o-rings made of durable rubber.
- Two smaller o-rings also made of state of the art rubber.
If you are not sure if this is the bolt kit you will need to attach your unloader, and need the manual that came with your unit, please click here to find your pumps breakdown and see if the AR2121 kit is needed. We also have the VR 3/B unloaders parts breakdown should you need more items to repair this popular by pass valve from AR Pumps.
AR2121 Bolt Repair Kit from AR Pumps
Should you have more questions, or only need to order one of this AR2121 bolt repair kit please call us today, and we will be happy to take your order over the phone, or help you with any unresolved issues: 1-877-824-7763 {Smart Phones Click to Call}
If you need two of more of this item, feel free to order it hassle free on our online store below:
Permanent link to this article: https://etscompany.com/wordpress/2015/01/19/ar2121-kit-annovi-reverberi-pumps/
SJV3G27D-EZ pump replacement from Annovi Reverberi.
The SJV3G27D-EZ is a standard replacement pump for your pressure washer. This SJV3G27D-EZ pump has a flow rate of 3 gallons per minute or 11.4 liters per minute with a maximum PSI of 2700, that would be 186 BAR. If your pressure washer can handle those specifications and can handle a pump that spins at 3400 RPM then this is the perfectly priced and one of the most well built replacement pumps you can buy today. This pump comes with a lot of built in features making it almost a true bolt and go style of pressure washer pump. The unloader comes already installed and the chemical injector also comes standard, and can be either fixed or of the adjustable type. The SJV3G27D-EZ is designed to install easily on any gasoline powered pressure washer engine that utilizes a 3/4″ hollow shaft, and has a horse power rating of between 3.5 and 6.5.
SJV3G27D-EZ pump replacement from Annovi Reverberi
A few other features you may need to know about the SJV3G27D-EZ pump:
- The crankcase oil capacity on the unit is 4.5 oz.
- Inlet and discharge threads on this pump are 1/2″ and 3/8″ male type connections.
- The weight in pounds on this SJV3G27D-EZ pump is 11.
- This pump has an EBPH power rating of 5.2.
- The stroke and bore of the item is 6.8mm and 15mm respectively.
- A 140° maximum water or chemical temperature can be pumped through the unit.
Should you already own a SJV3G27D-EZ pump from Annovi Reverberi, and just need to repair it, we have everything you need to do that as well. First you will need to know what parts you want to replace on the unit. Go to the pumps, parts breakdown page here and see which parts you will need. Then either call us at 1-877-824-7763 {Smart Phones Click to Call} or go online and order all the parts and kits you need.
If you wish to order this powerful pump you can do so online by clicking below.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/16/sjv3g27d-ez-pump-replacement-annovi-reverberi/
K123 General Pumps Valve Repair Kit 123
The K123 is the valve repair kit for the EZ series of pumps from General Pump. This kit K123 can be also written or searched for as k-123, k 123 or simply kit 123. However you decide to search for it, or however it’s written, this is all the same valve repair kit needed to fix the line of pressure washer pumps made by General Pumps that start with the letters EZ. These repair kits are all OEM direct from General, and are created from the world’s finest metal, plastic and rubber elements that can be purchased to ensure water tightness and longevity of the seals and your pump.
K123 General Pumps Valve Repair Kit 123
The K123 General Pumps Valve Repair Kit 123 contains the following units:
- The completely assembled valve with springs, seats and covers in a quantity of six.
- Six of the strongest o-rings for a water and chemical tight seal of the valves to the pump.
As we stated above this repair kit is used primarily on the EZ series of pump. If you have lost your manual that came with your unit, don’t worry! We have most of the parts breakdowns for General Pumps. Simply click here to go to our Breakdown page. Find your pump model and open the manual to see if this K123 repair kit is used on your pump or not.
If you are having trouble determining if this is the correct kit you need to fix your pressure washer pump, give us a call and we will guide you through the process and help you get the right fix for your unit.
Call 1-877-824-7763 {Smart Phones Click to Call}
Feel free to order this kit directly and easily online on our store if your sure it’s the fix for your pump.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/15/k123-general-pumps-valve-repair-kit-123/
30820 Valve Repair Kit for your pressure washer pump from CAT Pumps.
This 30820 valve repair kit from CAT pumps is the item you will need to fix most CAT units. The 30820 kit is made to fix the 51, 53, 55, 58, 530, 550, 650, 660 and 5Cp6120 series of pressure washer pumps from CAT. No matter which pump above you are trying to repair you will need two of this well built kit to get your unit back in the game. The o-rings and all the valves and their parts are made from the strongest materials to give you peace of mind that this type of repair won’t happen again for a long time. The valves in the 30820 kit come per-assembled so all you have to do is pop out the old ones and reset the new ones in your pump.
30820 kit for valve repair on your CAT Pump
The repair kit 30820 from CAT Pumps includes everything below:
- The Back-Up Ring already installed in the complete valve times 3.
- Three of the Seat O-Ring part also installed complete.
- All of the Seat Valves per-assembled in the valve times 3.
- The Spring Valve times 3 in the assembled unit.
- Three o-rings for a water / liquid tight seal on the valves.
- All of the valve plugs already combined in the valve times 3.
To see where the 30820 kit works on your pump, please go to our CAT Pumps parts breakdown page by clicking here. Find the pump you are trying to fix, and click on its data sheet to see the location of this kit on the parts breakdown.
Don’t see your pump on the page link above? Don’t worry we have you covered! Give us a call toll free and one of our technical experts will help you with determining if the 30820 repair kit is right for your style of CAT Pump. 1-877-824-7763 {Smart Phones Click to Call}
30820 Valve Repair Kit
If you are sure this is the kit you will need, go to our online store and remember you will need 2 of this item to repair any pump.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/14/30820-kit-valve-repair-cat-pump/
AR1857 Kit for Water Seals from Annovi Reverberi.
Today’s blog is on a very common repair AR1857 kit used on Annovi Reverberi pumps. This AR1857 water seal kit can be called by many names, such as the AR 1857 or even the AR-1857. It can be called a water seal or also a packing repair kit. No matter what you call it, it’s the repair kit you will need to fix the seals on your RK, RKA, RKV, XRV or XRCV series of AR Pump. All the parts in this repair kit are made from the best materials that Annovi Reverberi can acquire. This attention to detail in materials, in even the smallest repair parts goes to show you that AR pumps are one of the best crafted units in the world.
AR1857 Kit for Water Seals from Annovi Reverberi.
The AR1857 Water Seal Repair Kit contains the following items:
- Three high pressure packings with a part number of AR880320.
- The low pressure seals, part number AR880330 times three.
- O-rings that are part number AR961240 also times three.
As we stated above this is a very common 18mm water seal repair kit. If you need to see where the kit is used on your pump and you don’t have the parts breakdown that came with your unit, click one of the pumps here to see where the AR1857 is used: RK, RKA, RKV, XRV, XRCV.
Still not sure if your pump needs this kit or something else? Give us a call toll free and we will be glad to help you decide if this AR1857 is the correct repair for you of if you need another kit or part to get you back up and running. 1-877-824-7763 {Smart Phones Click to Call}
If you’re ready to order, please click the link below to purchase the item directly from our online store.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/13/ar1857-kit-water-seals-annovi-reverberi/
AR20400 Unloader from AR Pumps.
The AR20400 is the unloader or by pass you will need if you’re losing pressure on your pump. This AR20400 is the first replacement piece you should try on your pressure washer pump before replacing the unit. This particular unloader is made by Annovi Reverberi for its XM, RK, SX and RR series of pressure washer pumps. This specific unloader is rated for 5.5 gallons per minute and up to 3650 PSI . This item from AR Pumps is forged of the strongest brass on its body and has the best made plastic and rubber parts that the manufacturer could get their hands on to ensure long life for not only the AR20400 but for the pumps it goes on as well. This unloader can also be called AR 20400 or AR-20400, no matter how it’s written or said they are all the same part for AR Pumps.
AR20400 Unloader from Annovi Reverberi
Here are some specification for the AR20400:
- It has one 1/2″ FTP inlet port.
- The outlet port is a 3/8″ FTP style connection.
- This ar 20400 comes with a 2 inch injector standard.
- A forged brass by pass valve comes installed on the unloader.
Do you already own this unloader for one of the AR Pumps listed above and need repair parts for it? Click here for this gymatic unloaders breakdown of parts. Should you not have the breakdown that came with the pump you are trying to fix with this item, you can find all of Annovi Reverberi pumps breakdowns by clicking here.
Do you have more questions about the AR20400 unloader from AR North America? Give our knowledgeable sales staff a call and they will assist you with all your questions. 1-877-824-7763 {Smart Phones Click to Call}
If your ready to order this item for your pressure washer pump click the link below to purchase it hassle free.
Permanent link to this article: https://etscompany.com/wordpress/2015/01/12/ar20400-unloader-annovi-reverberi/
