The following is a detailed blog about the TS2021 Pressure Washer Pump From General Pumps.
The TS2021 is a replacement triplex series 47 pressure washer pump from General Pumps. Like all of the series 47 pumps from General it comes with the standard power an precision one expects from a pump of this size. The TS2021 has a maximum PSI of 3500 with a flow rate of 5.6 gallons per minute. This combined with a 1450 rounds per minute make this pressure washer replacement pump the ideal choice for your machine.
TS2021 General Pumps Pressure Washer Pump
Here are some important features you may need to know about the TS2021 Pump:
- The TS2021 has one of the largest crankcase oil capacity of 40.6 ounces.
- The 1/2″ FPT Inlet port and the 3/8″ FPT Outlet port are industry standards for this size replacement pump.
- A 165 degrees F. maximum liquid temperature make it ideal for pressure washers used in the cleaning circles.
- With a weight of 32 pounds and dimensions of 12.2″ x 9.2″ x 6.9″ make this replacement pump a superior fit for most pressure washers on the market today.
- Oil changing is only required about once every 500 hours or 3 months of in use service which ever comes first. This is after the very first oil change which should be done after the initial 40 hours of run time.
The TS2021 Exploded View of Parts
This TS2021 pump from General pump comes with a lifetime warranty on the head of the pump which is made from forged brass. The crankcase is tough and rugged being made of a die cast anodized aluminum, with one of the largest capacities of pumps of this power and size. The tapered roller bearings are made from the most heavy duty materials and the ceramic plunger rods are always being lubricated with the packings to give you the most from your purchase of this replacement pump.
Do you have any more questions we didn’t cover here? Give us a call and we will be happy to assist you in your search for a replacement pump for your pressure washer: Call 1-877-824-7763 {Smart Phones Click to Call}
If your ready to order the TS2021 Pump click below.
Permanent link to this article: https://etscompany.com/wordpress/2014/12/22/ts2021-general-pumps-pressure-washer-pump/
Here is a little more information on the General Pump TS1511 T Series Pressure Washer Pump
This 47 series T pump from General Pumps is one of the best pumps on the market made specifically for the cleaning industry. The TS1511 pump has a powerful 4 gallon per minute rating with a PSI of up to 3500 making it the perfect pump for all your cleaning needs.
General Pump TS1511 T Series Pressure Washer Pump
The General Pump TS1511 T Series Pressure Washer Pump comes with an industry exclusive lifetime warranty on the manifold which is made of strong forged brass. The pump has one of the largest crankcases with a 40.6 oz capacity and is made of anodized die cast aluminum. This pump from General pumps also has completely solid ceramic plungers that are constantly being lubricated by the TS1511 pumps packings.
Other Features on the TS1511 Pump from General Pumps:
- This pump has 1/2″ FTP inlet ports and outlet ports that measure 3/8″ FTP.
- The 6.8 bhp or 10.3 hp (gas) is the bare minimum horsepower you need to power this pump.
- The TS1511 is also able to be purchased in a “L” type verison. More information here.
- The pump has a .787″ or 20mm bore dimension and a stroke dimension of .472″ or 12mm.
- It’s shaft diameter is a profound .945″ or 24mm.
- The dimensions and weight of this pump are 12.2″ x 9.2″ 6.9″ and 32.0 lbs. respectively.
Oil consumption and break in period for a new TS1511 Pump from General Pumps:
You will need to fill the oil crankcase after unpacking and installing this pump to the oil gauge indicator DOT found on the oil gauge window with a non-detergent SAE 30 weight oil. Then after about 40 hours of you using the pump you will need to drain the oil from the pump and refill with new oil of the same specifications above. After this initial 1st time period you shouldn’t have to redo the oil until either 500 hours of use or 3 months have passed.
Need more technical data or parts breakdown on the General Pump TS1511 pump?
Click here for Parts Breakdown
If you need any more information or help with this pump from General Pumps please give us a call at:
Call 1-877-824-7763 {Smart Phones Click to Call}
Or if your ready to order the TS1511 pump you can call the number above or,
Permanent link to this article: https://etscompany.com/wordpress/2014/12/18/general-pump-ts1511-t-series-pressure-washer-pump/
Here is a quick spotlight on the Annovi Reverberi Pressure washer pump SRMW2.2G26-EZ-SX
AR North America proudly presents the Italian made SRMW2.2G26-EZ-SX from Annovi Reverberi. This is a direct drive rear mounting pump that has the strong power you need on your pressure washer with a rating of 2.2 gallons per minute and a PSI of 2600. This is a vertical mounting pump that will attach to the under side of your pressure washers engine.
AR North America SRMW2.2G26-EZ-SX pump from Annovi Reverberi
A few more features of this SRMW2.2G26-EZ-SX pump from Annovi Reverberi are:
- It has a 3400 RPM maximum pump speed for awesome performance.
- The SRMW2.2G26-EZ-SX pump comes standard with a chemical injector and a built in unloader.
- The 5.2 GPH is the maximum horsepower you will need to run this pressure washer pump.
- It has garden hoses sized inlet ports of 3/4″ FGH threads, and twist type connecting 22mm outlet ports for ease of connection.
- It comes standard with plungers made of stainless steel and it’s valve plugs and manifold are made from the toughest aluminum.
- Finally the SRMW2.2G26-EZ-SX pump from Annovi Reverberi comes filled with oil so it’s ready to go when you are and weighs in at only 5.1 pounds.
A few more things you may need to know about the SRMW2.2G26-EZ-SX pump:
The pressure washer pump is made to fit a host of pressure washer like (but not limited to) Briggs Power Products, Brute, Craftsman, John Deere, Troybilt, and other pressure washers of this type. You need to remember it is a back mounting pump that is rotated 180º. Also please note that this pump will not work on any Karcher pressure washers that have the hex style of bolting to the drive directly style. Finally the SRMW2.2G26-EZ-SX pump has a 3 to 6 horse power gas flange with a vertical mount.
If you need any other information on this SRMW2.2G26-EZ-SX pump from Annovi Reverberi please don’t hesitiate to give us a call at: Call 1-877-824-7763 {Smart Phones Click to Call}
Or if your ready to order it you can do it online now.
To order the SRMW2.2G26-EZ-SX Pressure Washer Pump from AR North America and Annovi Reverberi
Permanent link to this article: https://etscompany.com/wordpress/2014/12/17/direct-drive-pressure-washer-pump-srmw2-2g26-ez-sx-annovi-reverberi/
Spotlight on the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8
Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8
Features of the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8:
- Direct Drive with electric flange
- 5/8″ Shaft Diameter
- Die-cast body and brass head
- Plungers – solid ceramic titanium impregnated for extended pump life
- Crankcase – oversized die cast aluminum with special cooling fins
- Bearings – premium tapered roller bearings
- Valves, seats and springs – stainless steel with ultraform cages
- Plunger rods – high strength stainless steel.
- Connecting rods – oversized one piece special alloy to assure proper plunger alignment
Specifications of the Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8:
- Max GPM………………3
- Max LMP…………………………11.4
- Max PSI………………….2200
- Max Bar………………………….152
- Power EBHP……………4.5
- Bore Dia. mm…………………….18
- Stroke mm……………….9.6
- Weight Lbs………………………..11
- Max Temp……………….140°
- Oil Capacity………………………10oz
- Inlet Thread ……………1/2”F
- Discharge Thread……………….3/8”F
Annovi Reverberi Pressure Washer Pump – XTA3G22E-F8
XTA3G22E-F8 AR (Annovi Reverberi) Pump 3 GPM @ 2200 PSI @ 1750 RPM, XTA1750rpm.
XTA3G22E-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. The XTA3G22E-F8 has One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, over sized for strength and load disbursement.
XTA3G22E-F8 Pump Breakdown
Click here for the Parts Breakdown of the XTA3G22E-F8 Pressure Washer Pump
- Items NOT INCLUDED with your XTA3G22E-F8 Plunger Pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
- The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your XTA3G22E-F8 Plunger Pump (saving you the trouble of rebuilding your pump)
- PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
- The INLET WATER FILTER will catch most small debris before it enters your XTA3G22E-F8 Plunger Pump
- The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
- The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your XTA3G22E-F8 Plunger Pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
- PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
|
List Price: $696.75
You save $341.51!
|
SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: XTA3G22E-F8
Price subject to change on the XTA3G22E-F8 Pressure Washer Pump from Annovi Reverberi
Permanent link to this article: https://etscompany.com/wordpress/2014/12/08/annovi-reverberi-pressure-washer-pump-xta3g22e-f8/
Use code Cyber at checkout for 15% off
EXTENDED – Get 15% off. VERY Best Sale of the year.
Order $55.00 or more and use code CYBER at Check out for 15% off!
Use Code Code above at Checkout
Shopetsonline.com
*Online Orders ONLY
Permanent link to this article: https://etscompany.com/wordpress/2014/12/03/extended-cyber-monday-savings-week-15-off-55-00/
Cyber Monday 15% off everything over $75.00
12/01- Get 15% off. VERY Best Sale of the year.
Order $75.00 or more and use code CYBER at Check out for 15% off!
Use Code Code above at Checkout
Shopetsonline.com
*Online Orders ONLY
Valid One day only! 12/01/2014 Sale ends at Midnight!
Permanent link to this article: https://etscompany.com/wordpress/2014/12/01/cyber-monday-sale-year-pressure-washers/
Black Friday and Cyber Monday Sale Spectacular @ Shopetsonline.com
11/28 – 12/01- Get from 5% to 15% off. Best Sale of the year.
Spend $50.00 to $99.00 Get 5% off with Code 5 at checkout
Spend $100.00 to $199.99 Get 10% off with Code 10 at checkout
Spend $200.00 or more and get 15% off with Code 15 at checkout
Black Friday / Cyber Monday Sale
Use Code Codes above at Checkout
*Online Orders ONLY
Can Not be used on “Free Shipping” Items, & Chemical Products
Your order will be canceled if you use code on these items.
Equipment Trade Service Co. web site, your 1 stop for:
Pressure Washers, Pressure Washer Parts, Pressure Washer Pumps, Hose Reels, Graffiti Removers, Cleaning Compounds, Wet/Dry Vacuums, Pressure Washer Accessories, and more! We sell ALL the top pressure washer pump brands like: Annovi Reverberi, CAT Pumps, General Pumps, Giant Pumps, Comet Pumps, Hyrpo Pumps, Mi-T-M, LANDA and more. We ship the fastest and have some of the best prices around for Repair Kits, Parts and Accessories for all the top pump brands as well. So if you need to repair or replace your Annovi Reverberi, CAT, General, Giant, Comet, Hyrpo, Mi-T-M, LANDA or any other Pressure Washer Pump:
CALL US TOLL FREE INSIDE THE UNITED STATES: 1-877-824-7763
OUTSIDE THE UNITED STATES CALL 1-610-583-7657
OR E-MAIL US AT ets@etscompany.com
Permanent link to this article: https://etscompany.com/wordpress/2014/11/24/black-friday-cyber-monday-sale-spectacular/
Annovi Reverberi Repair Kit – AR1866
Annovi Reverberi Kit – AR1866
The AR1866 is used on the Annovi Reverberi XT, XTA, XTV series pressure washer pumps also known as AR pumps.
AR1866 Kit: Packing XTA XTV AR Annovi Reverberi Pump Seal Kit #1866 – Fits AR Pump Models XTA-15mm, XTV AR WATER SEALS/PACKING KIT CONTAINS HIGH PRESSURE AND LOW PRESSURE SEALS (PACKING) TO SERVICE 3 CYLINDERS ON YOUR AR PRESSURE WASHER PUMP
The AR1866 Water Seal Kit is the Original Equipment AR replacement Seal Kit.
This AR1866 Water Seal Kit consists of the following parts:
- 3 x AR1260140 Support Ring Reducer Brass
- 3 x AR1260141 Support Ring Reducer Plastic
- 3 x AR1520120 Support Ring
- 3 x AR1271650 High Pressure Packing
- 3 x AR1260420 O-Ring
- 3 x AR1260440 Low Pressure Seal
The Annovi Reverberi AR1866 Water Seal Kit is the Original Equipment AR replacement Water Seal Kit and works with the following AR pump models:
- XT8.14N
- XTA2G15NBA
- XTA2G22N
- XTA3G16N
- XTA3G19N
- XTA0.5G10EBA-F8
- XTA1G15E-F8
- XTA2G15EBA-F8
- XTA2G22E-F8
- XTA3G16EBA-F8
- XTA3G19E-F8
- XTA4G15EBA-F8
- XTV0.5G10E-F8
- XTV2G15EBA-F8
- XTV2G22E-F8
- XTV3G16E-F8
- XTV3G22E-F8
- XTV2G15DBA-F7
- XTV3G22D-F7
|
List Price: $91.41
You save $35.14!
|
SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: AR1866
Price subject to change on the repair kit from Annovi Reverberi AR1866
Permanent link to this article: https://etscompany.com/wordpress/2014/11/19/ar1866-kit-annovi-reverberi/
Spotlight on the Hannay Reels N818-25-26-10.5B Spring Rewind Reel
Hannay Reels N818-25-26-10.5B Spring Rewind Reel
Features of the N800 Hannay Reels N818-25-26-10.5B Spring Rewind Reel:
- To handle 3/4″ or 1″ I.D. hose.
- Standard N series has a narrow frame and compact mounting base.
- Non sparking ratchet assembly.
- Declutching arbor to prevent damage from reverse winding.
- Standard inlet 90° balanced pressure swivel joint 1″ female NPT threads.
- Standard outlet 1″ female NPT threads.
- Pressures to 1000 psi (69 bar).
- Temperatures from -40° F to +250° F (-40° C to +121° C).
- Consult factory for other pressures & temps.
- 4-way roller assembly
- Constant Tension is available – consult factory.
Pick the N800 Hannay Reels N818-25-26-10.5B Spring Rewind Reel to handle single 70 ft. of 3/4″ or 50 ft. of 1″ I.D. hose. See detailed spec sheet here for dimensions and additional information. Great for Fuel Dispensing (Consult Factory), Waste Oil Evacuation and Air/Water.
SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: HAHR-48-41
Price subject to change on the N800 Hannay Reels N818-25-26-10.5B hose reel.
Permanent link to this article: https://etscompany.com/wordpress/2014/11/13/hannay-reels-n818-25-26-10-5b-spring-rewind-reel/
A Spotlight blog on Hypro Pumps 5324C “Small Twin” piston pump.
Hypro Pumps 5324C “Small Twin” piston pump
Features of the Hypro Pumps 5324C “Small Twin” piston pump:
- Port sizes: 1⁄2″ inlet, 1⁄2″ outlet
- Max. fluid temperature: 140°F/60°C
- Weight: 10 lbs./4.5 kg
- Pump shaft rotation: bi-rotational
- Cups: Leather (-X) standard for 5300 Series [Buna-N (-RX), Teflon (-CX) available]
- Models require a pulsation dampener (such as a 3375-0012 pulse hose) on the discharge side
- Injector head available 3396-0014
Technical Specifications of the Hypro Pumps 5324C “Small Twin” piston pump:
- MAXIMUM RATED FLOW: 3 GPM
- MAXIMUM PRESSURE: 500 PSI
- MAXIMUM RATED SPEED: 1800 RPM
- MAXIMUM FLUID TEMPERATURE: 140°F/60°C
The 5324C “Small Twin” piston pumps from Pentair Hypro are used in a variety of spraying, pressure cleaning and hydrostatic testing applications. The 5324C heavy-duty pumps are ideal for fluid handling of water and non-abrasive or general use chemicals. All pumps are constructed from cast iron materials.
|
List Price: $538.00
You save $179.39!
|
SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: 5324C
Price subject to change on the 5324C piston pump from Hypro Pumps.
Permanent link to this article: https://etscompany.com/wordpress/2014/11/05/spotlight-hypro-pumps-5324c-small-twin-piston-pump/
