Spotlight on the SUTTNER FOOT VALVE 12 GPM 5000 PSI.
SUTTNER FOOT VALVE 12 GPM 5000 PSI
The SUTTNER FOOT VALVE 12 GPM 5000 PSI Features:
- Pressure: 5000 PSI maximum
- Flow Rate: 12 GPM maximum
- Inlet: 3/8″ FPT
- Outlet: 1/4″ FPT
SUTTNER FOOT VALVE is rated 12 GPM 5000 PSI.
5000 PSI FOOT VALVE.
Excellent for sewer hose and nozzle operation.
- A ST-2605 spray gun is placed inside to control water flow.
- Foot controlled so both hands are free to work.
- Inlet/outlet positioned to help keep hose out of the way.
- Pedal and gun are in protective housing
- Heavy gauge steel construction for durability and stability
|
List Price: $272.60
You save $62.83!
|
SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: BAPL-6040
Price subject to change on this Suttner Foot Valve.
Permanent link to this article: https://etscompany.com/wordpress/2014/10/30/suttner-foot-valve-12-gpm-5000-psi/
Spotlight on the Mi-T-M HSP-2503-0MMS Hot Pressure Washer with a [ 211cc OHC SUBARU Engine ]
Mi-T-M HSP-2503-0MMS Hot Pressure Washer
- PSI 2400
- GPM 2.6
- Displacement/Engine 211cc Subaru OHC
- Gas Tank Cap. 0.95 gallon
- Burner Fuel Tank Cap. 4.0 gallon
- Burner Fuel Cons. 1.53 gph
- BTU Per Hour 205,000
- Net Weight 269 lbs.
- Shipping Weight 385 lbs.
- Length 38 in.
- Width 30 in.
- Height 38 in.
Features of the Mi-T-M HSP-2503-0MMS Hot Pressure Washer:
- Mi-T-M Pressure Washer Performance-proven OHV engine with low oil protection and recoil start
- Direct drive triplex ceramic piston pump with forged brass manifold
- Thermal relief valve
- Stainless-steel and brass unloader valve
- Low pressure detergent injection
- Complete system diagnostic board
- Pressure and high limit safety controls
- No. 1 or No. 2 diesel or kerosene fired burner
- Polyethylene burner fuel tank
- Temperature rise 150 degrees F/66 degrees C above ambient, maximum outlet temperature 200 degrees F
- Wand holder
- Locking tire brake
- Solid steel threaded axles
- Pneumatic tires with tubes (4)
- 50 foot x 3/8 inch steel wire braided pressure hose with screw connects, swivel, and bend restrictors
- Professional grade insulated trigger gun with safety lock-off
- Adjustable pressure insulated dual lance with 15 degree fixed and detergent nozzle
- One (1) year limited parts and labor warranty
- Three (3) year limited warranty on coil
- Seven (7) year limited warranty on pump
- Two (2) year limited warranty on Honda engine
- Three (3) year limited warranty on Subaru engine
Mi-T-M Hot Pressure Washer, 2.6 GPM @ 2500 PSI, 211cc OHC SUBARU Engine. The HSP Series is designed with the Mi-T-M patented electro magnetic firing system, which means there is no need for a 12V battery, generator, blower motor and alternator; therefore, making these units especially maintenance friendly.
Pump: Direct drive triplex piston Mi-T-M pump · Stainless-steel and brass unloader valve · Forged brass manifold · Thermal relief valve · Low pressure detergent injection
Engine: Performance-proven Subaru OHC engine with low-oil protection and recoil start
Frame: Reinforced powder coated steel tube frame with center balanced lifting hook · Powder coated steel hose reel mounting bracket · Wand holder · Solid steel threaded axles · Four pneumatic tires with tubes · Locking tire brake
Components: High quality fuel filter/water separator ensures clean fuel supply · Complete system diagnostic board · Pressure and high limit safety controls · No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) · Polyethylene burner fuel tank · Easy coil drain helps prevent freezing in cold weather · Patented Electro Magnetic Firing (EMF) System · Energy efficient top fired powder coated heat exchanger designed for convenient trouble-shooting and easy maintenance · On/off burner switch
Unit Includes: 50-foot x 3/8-inch steel wire-braided pressure hose with screw connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with 15-degree fixed and detergent nozzle
Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F
|
List Price: $4,700.00
You save $1,342.85!
|
SHIPPING: Item Ships in 1 to 7 Days
Call 1-877-824-7763 {Smart Phones Click to Call} for More information
Availability:: In Stock
Product Code: HSP-2503-0MMS
Price Subject to change on the HSP-2503-0MMS
Permanent link to this article: https://etscompany.com/wordpress/2014/10/21/mi-t-m-hsp-2503-0mms-hot-pressure-washer/
Pump Made Ready XMV3G30D-F24 with VRT3-250 with Bypass & Thermal Relief Valve
Pump Made Ready XMV3G30D-F24 with VRT3-250 with Bypass & Thermal Relief Valve
s of this Pump Made Ready XMV3G30D-F24 with VRT3-250 with Bypass & Thermal Relief Valve:
- Triplex Plunger Pump
- Direct Drive with Gas Flange
- Maximum Volume: 3.0 GPM
- Maximum Discharge Pressure: 3000 PSI
- Maximum Pump Speed: 3400 RPM
- Minimum Horsepower Requirement: 9.3 hp for gas engines
- Shaft Diameter: 1″ ID with gas flange
- Weight: 19 lb.
Features of the Pump Made Ready XMV3G30D-F24 with VRT3-250 with Bypass & Thermal Relief Valve:
- Manifold: High strength forged brass for long term use
- Bolts: eight 6mm grade 12.9
- Plungers: A special thick solid ceramic for long life, strong durability and more resilience
- Crankcase: Precision die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
- Bearings: Ove rsized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.
- Valves, Seats, and Springs: Stainless steel with specially designed ultra form cages provide extra long life and positive seating.
- Seals and Packings: Continuously lubricating for extended life
- Plunger Rods: High strength stainless steel
- Connecting Rods: One piece special alloy aluminum based over sized for maximum strength, load disbursement, and long life
The XMV3G30D-F24-VRT3-250 W/BYPASS & THERM RELIEF Valve Pump made ready is designed for easy replacement of most pumps. Remove your old pump and fittings and slide this pump made ready on.
SEE BAPL-6600 TO ADD TESTING TO CART.
Lubrication for thePump Made Ready XMV3G30D-F24 with VRT3-250 with Bypass & Thermal Relief Valve:
Use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.
|
List Price: $546.46
You save $125.96!
|
SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: BAPL-5321
Price subject to change on the XMV3G30D-F24 Pump Made Ready with VRT3-250 Unloader and Bypass & Thermal Relief Valves.
Permanent link to this article: https://etscompany.com/wordpress/2014/10/15/pump-made-ready-xmv3g30d-f24-vrt3-250-bypass-thermal-relief-valve/
With winter coming soon, now is the time to get one of our undercarriage / under car washers for your fleet of cars and other vehicles. Highway road crews and local Streets an Sanitation departments have taken to this two part process to make removal of winter’s snow faster and easier. While the road salt and brine solutions are making it easier and faster for road crews to clear away the snow, they are also proving to be more damaging to the underside of your vehicles frame as well as to brakes and other lines and untreated metal parts under your fleets bodies. The only solution to this is to use a high pressure device that makes it easy to get under and blast off all remnants of the road salt and brine solutions. As shown in the video below our undercarriage washer from ETS Company can help you quickly and easily get under your vehicles and blast that winter weather mess from your frames.
Even car washes agree that this brine solution is a difficult solution to remove… “”With the salt brine it just seems to be leaving a really nasty, oily film on the cars and it’s tricky to get it off,” said Chris Chicoine, the manager of Seaway Car Wash. Your standard under car sprays just don’t cut it anymore.
“I think the brine is holding the salt to the vehicle, just like it holds the salt to the roads,” said Ray Kaigle of Kaigle’s. So the longer all this salt and brine stay on your cars and trucks the more corrosive damage they can do. “What used to be normal corrosion is now failed for inspection,” Kaigle said. “We’re seeing more frozen brake pads in the holders, in the brackets, more broken brake lines and more broken fuel lines.” All this should lead you to seek out the best solution to keeping your car or truck fleet up and running with the least amount of repair work.
ETS Company is here to help you with that with our Undercarriage / Under Car cleaner. Hook up your undercarriage / car cleaner to hot or cold water and move it under the vehicles in your fleet to wash away the salt and brine solutions that will slowly eat away at your car or truck. Watch the power of the unit in the video below then give ETS Company a call to get more details on how to get this machine for your commercial or residential use.
Permanent link to this article: https://etscompany.com/wordpress/2014/10/09/remove-winter-road-salt-brine-solutions-cars-commercial-fleets/
Spotlight on the XTA4G15EBA-F8 Annovi Reverberi Pressure Washer Pump.
XTA4G15EBA-F8 Annovi Reverberi Pressure Washer Pump
s of the XTA4G15EBA-F8:
- Max GPM………………4
- Max LMP…………………………15
- Max PSI………………….1500
- Max Bar………………………….103
- Power EBHP……………4
- Bore Dia. mm…………………….18
- Stroke mm……………….12.8
- Weight Lbs………………………..11
- Max Temp……………….140°
- Oil Capacity……………………… 8oz
- Inlet Thread ……………1/2”F
- Discharge Thread……………….3/8”F
Features of the XTA4G15EBA-F8:
- Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety, performance.
- Inlet and Discharge Ports: Heavy bosses for added strength.
- Offset Discharge Ports: High efficiency, smooth flow.
- Bolts: Six Bolts, 6mm, grade 12.9.
- Ultra Form Cages: Durability, strength and long life.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Valve Caps: Machined brass – greater strength.
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- Low Pressure Seals: “U” cup double lip Buna-N. Good positive seal.
- Support Guides: Machined brass one-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
- Bearings: Over sized for maximum life and load disbursement, two ball bearings on the solid shaft series and a needle bearing on the drive side and ball on the non-drive side for the hollow shaft series. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
- Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
- Rear Cover: Precision die-cast, precision punched gasket sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
- Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
- Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
- Connection Rods: One piece special alloy aluminum based and bronze, over sized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
- Crankshaft: Forged one-piece, precision ground and hardened for extremely long life and durability.
- Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
- Oil Capacity: Flat cover 8 oz. and extended cover 10 oz.
- Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
- Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
- Hot Water: High temperature kits are available to 180º F. Refer to breakdown.
- Wet End Repair: Very simple no special tools are required.
- Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
- Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
XTA4G15EBA-F8 Annovi Reverberi Pressure Washer Pump
Click here for the Parts Breakdown of this XTA4G15EBA-F8 Pump
XTA4G15EBA-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Over sized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, over sized for strength and load disbursement.
Service manual for the XTA4G15EBA-F8 Pressure Washer Pump Click here.
Items NOT INCLUDED with your pump that you may need:
- Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
- The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
- PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
- The INLET WATER FILTER will catch most small debris before it enters your pump
- The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
- The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
- PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
List Price: $681.74
You save $255.05!
Availability:: In Stock
Product Code: XTA4G15EBA-F8
Price Subject to change on the XTA4G15EBA-F8
Permanent link to this article: https://etscompany.com/wordpress/2014/09/30/xta4g15eba-f8-annovi-reverberi-pressure-washer-pump/
Get 5% off all orders over $50.00 at Shopetsonline.com, your 1 stop for:
Pressure Washers, Pressure Washer Parts, Pressure Washer Pumps, Hose Reels, Graffiti Removers, Cleaning Compounds, Wet/Dry Vacuums, Pressure Washer Accessories, and more!
5% off $50.00 or more.
5% off all orders over $50.00*
Use Code 5off at Checkout
*Online Orders ONLY. Can Not be used on “Free Shipping” Items, New Machines.
Your order will be canceled if you use code on these items
Permanent link to this article: https://etscompany.com/wordpress/2014/09/23/5-orders-50-00-shopetsonline-com/
Spotlight on the SJV2.5G27D-F7 AR Annovi Reverberi Pressure Washer Pump.
- Max GPM………………2.5
- Max LMP…………………………9.5
- Max PSI………………….2700
- Max Bar………………………….186
- Power EBHP……………4.5
- Bore Dia. mm…………………….15
- Stroke mm……………….5.8
- Weight Lbs………………………..11
- Max Temp……………….140°
- Oil Capacity………………………4.5oz
- Inlet Thread ……………1/2”M
- Discharge Thread……………….3/8”M
SJV2.5G27D-F7 AR Annovi Reverberi Pressure Washer Pump
Features
- – Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
- – Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
- – Bolts: Three bolts, 10mm, grade 8.8.
- – Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
- – Poppets, Seat and Spring: 303 and 400 series stainless steel.
- – Valve Caps: Machined brass for greater strength.
- – High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
- – Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- – Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
- – Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
- Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
- Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
- Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
- Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
- Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
- Oil Capacity: 4.5 oz.
- Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
- Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
- Wet End Repair: Very simple no special tools required.
- Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
- Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
The AR SJV2.5G27D-F7 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. This SJV2.5G27D-F7 pump has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
SJV2.5G27D-F7
R:
- NOT INCLUDED with your SJV2.5G27D-F7 pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
- The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
- PRESSURE REGULATOR / UNLOADER – if we list one to the right of the SJV2.5G27D-F7 pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
- The INLET WATER FILTER will catch most small debris before it enters your pump
- The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
- The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your SJV2.5G27D-F7 pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
- PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
|
List Price: $506.57
You save $254.87!
|
SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: ARWP-RTR-SJV2.5G27D-F7
price subject to change on the SJV2.5G27D-F7
Permanent link to this article: https://etscompany.com/wordpress/2014/09/16/sjv2-5g27d-f7-ar-annovi-reverberi-pressure-washer-pump/
Spotlight on the KF Series Left handed KF35AL Pressure Washer Pump from General Pumps.
General Pumps – KF36AL – Pressure washer pump
Features of the KF36AL left handed pressure washer pump from General Pumps:
- GPM 36.2
- PSI 2050
- RPM 900
- The KF36AL pump has been designed to pump fresh and filtered (360 micron max.) water at room temperature. Special versions are available for pumping water up to 185F and for reverse osmosis units.
- The water temperature is critical for the pump life: the higher the water temperature, the more likely it is to create cavitation, resulting in premature seal and valve failures. For such conditions, use HT series pumps.
KF36AL Parts Break down
List Price: $8,652.00
You save $1,994.29!
SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: KF36AL
Price subject to change on this pressure washer pump from General Pumps – KF36AL
Permanent link to this article: https://etscompany.com/wordpress/2014/09/03/general-pumps-kf36al-pressure-washer-pump/
A Spotlight on the AR2189 the water seal kit for the RSV series of Pressure Washer Pumps.
AR2189 Water Seal Kit by Annovi Reverberi
This is the water seal and packing kit for the RSV series of Annovi Reverberi pressure washer pumps. The AR2189 kit contains everything you need to repair the wet end of your pressure washer pump. There are enough high pressure and low pressure seals (also called packings) to repair or service up to 3 cylinders on your ar pump.
AR2189 water seal kit contains:
- AR1342761 – Gasket, quantity 3
- AR1981580 – RIng, quantity 3
- AR770260 – O-Ring, quantity 3
- AR1260440 – Gasket, quantity 3
- AR640070 – O-Ring Quantity 3
This water seal kit can be used to repair many types of Annovi Reverberi Pressure Washer Pumps, including misting pumps, plunger pumps, and even some the the AR Blue Clean Pressure Washing pumps. The AR2189 kit can also be use to fix the pumps used on most of today’s pressure washers from Black and Decker, Husky, Briggs & Stratton, Craftsman and Troy Built to Dewalt, Ex-cell, Job Boss and even the AR Blue Clean line of pressure washers. So whether your pressure washer was purchased from a Home Depot, Lowes, Sears or Ace Hardware or Menards chances are it has an Annovi Reverberi Pump in it and can probably be fix by the AR2189 Water Seal Kit. Check your owners manuals for specific Pump specifications.
List Price: $65.77
You save $25.28!
Availability:: In Stock
Product Code: AR2189
Price subject to change on the AR2189 Kit.
Permanent link to this article: https://etscompany.com/wordpress/2014/08/26/ar2189-annovi-reverberi-water-seal-kit-rsv-series-pumps/
Spotlight on the SH27003VH Mobile Pressure Washer Skid
SH27003VH Mobile Pressure Washer Skid
Features of this SH27003VH Mobile Pressure Washer Skid:
- The SH27003VH Series Pressure Washer is a highly portable machine with a small footprint, ideal for use where electric power is not available. The industry trusted electric-start 6.5 Briggs & Stratton engine provides power to the Comet pump and thermostatically controlled 12 VDC Beckett burner. The engine on this SH27003VH mobile pressure washer has a 20 Amp charging circuit. A down-stream injector gives the user hot soap control from the gun. The stainless steel wrapped 1/2″ SCH 80 steel coil heats the water up to 250F. You will experience extended burner run time with the larger 8 gallon diesel tank. The rugged powder coated frame has a lift point, integrated hose hooks and a big pneumatic wheel kit is included for portability. The SH27003VH Mobile Pressure Washer Skid is complete with gun/wand, 50′ high pressure hose, quick connect nozzles, down-stream injector and adjustable thermostat. Requires group 24 550 CCA battery, not included
SH27003VH Mobile Pressure Washer Skid
2700 PSI
2.5 GPM Diesel Fired
**This item requires California sales tax to be added to California deliveries.**
CALL 1-877-824-7763 for More information
|
List Price: $4,998.00
You save $1,974.00!
|
SHIPPING: Item Ships in 1 to 7 Days
Availability:: In Stock
Product Code: SH27003VH
Price is subject to change on this mobile pressure washer skid SH27003VH unit
Permanent link to this article: https://etscompany.com/wordpress/2014/08/19/sh27003vh-mobile-pressure-washer-skid/
