GIANT Pumps, Parts & Kits

GIANT CONSUMER PUMPS

GIANT GXR Vertical or Horizontal Pumps with Regulator includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End
GXR 2424	2.4	2400	3450	5.2	Brass
GXR 2224	2.2	2400	3450	5.0	Brass

Weight: 9 lbs. Bore Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature: 80 degree F

Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT

GIANT GX Vertical or Horizontal Pumps with Unloader includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End
GX 2025	2.0	2500	3450	3.4	Brass
GX 2325	2.3	2500	3450	3.9	Brass
GX 2525	2.5	2500	3450	4.3	Brass

Weight: 9 lbs. Bore Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature: 80 degree F

Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT

GIANT P200 PUMPS

Series Triplex Plunger Pumps

P200 Pump Assemblies


GIANT BELT DRIVE Pump	GIANT ELECTRIC DRIVE Pump


	GIANT GAS DRIVE Pump

GIANT P200 Pump Assemblies

Model	Max. GPM	PSI Continuous	PSI Intermittent	Max. RPM	Req’d BHP	Fluid End
P205	0.5	2000	2500	1750	1.2	Brass
P206	0.8	2000	2500	1750	2.1	Brass
P205	0.9	2000	2500	3450	1.2	Brass
P208	1.0	2000	2500	1750	2.6	Brass
P230	1.1	2000	2500	1750	2.8	Brass
P209	1.5	2000	2500	1750	6.2	Brass
P206	1.5	2000	2500	3450	1.8	Brass
P223	1.7	2000	3000	1750	4.6	Brass
P210	1.8	2000	2500	1750	2.6	Brass
P217	1.8	2000	2500	1750	2.8	Brass
P208	1.9	2000	2500	3450	2.6	Brass
P230	2.0	2000	2500	3450	2.8	Brass
P221	2.3	2000	2500	1750	2.8	Brass
P209	2.7	2000	2500	3450	3.7	Brass
P223	3.0	2000	3000	3450	6.2	Brass
P217	3.3	2000	2500	3450	4.6	Brass
P210	3.3	2000	2500	3450	4.6	Brass
P218	3.4	2000	2500	1750	4.7	Brass
P219	4.2	2000	2500	1750	4.7	Brass
P221	4.2	2000		3450	5.8	Brass
P220	4.7	2000	2500	1750	6.5	Brass

GIANT P300 PUMPS

Series Triplex Plunger Pumps

GIANT P300 ASSEMBLIES


GIANT P300 Series Pump with Electric Drive	GIANT P300 Series Pump with Gas Drive

GIANT P300 Series Pump	GIANT P300 Series Pump with Gearbox

GIANT P300 SERIES PUMPS

Model	GPM Cont.	PSI Cont.	PSI Inter.	Max. RPM	Req’d BHP	Fluid End
P340	3.5	3500	4000	1750	8.4	Brass
P317	3.7	3000	3500	1800	7.7	Brass
P313	3.8	3200	3500	3450	8.4	Brass
P314	3.8	3500	4000	3450	9.2	Brass
P316	3.9	3000	3500	1450	8.1	Brass
P316	4.7	2500	3000	1750	8.1	Brass
P319	4.8	2500	3000	3400	8.3	Brass
P318	5.5	2000		1450	7.6	Brass
P318	6.6	2000		1750	7.6	Brass

GIANT 400 Series Triplex Plunger Pumps

Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End	Notes
P460	3.8	7250	1450	19.0	S.S.
P455	5.5	5000	1450	19.0	Brass
P450A	5.5	3200	1450	19.0	Al.Bronze
P430A	7.5	3200	1450	14.8	Brass
P440A	5.5	4000	1450	15.2	Al.Bronze
P423	8.3	2600	1450	14.9	Brass
P422	10.0	2500	1450	20.7	Brass
P425	10.7	2000	1450	15.6	Brass
P420A	13.0	1700	1460	15.2	Brass
P420A-3100	13.0	1700	1460	15.2	Al.Bronze
P420A-5100	13.0	2000	1460	15.2	316 S.S.

Weight: 37 lbs. Shaft Size: 28mm Max. Temperature: 160 oF (104 oF for P460) * Consult factory when operating at this speed.

Port sizes:

Pump Model	Inlet Port	Discharge Port
P420A/P422	(2) 1 ” NPT	(2) 3/4″ NPT
P440	(2) 3/4″ NPT	(2) 3/4″ NPT
P430	(2) 3/4″ BSP	(2) 3/4″ BSP
P450A	(2) 1/2″ BSP	(2) 1/2″ BSP
P420-3100/P420-5100	(2) 1″ BSP	(2) 3/4″ BSP
P460	(2) 1/2″ BSP	(2) 1/2 ” BSP

GIANT Bentonite PumpsGiant Industries Bentonite pumps, are used for transporting of the Bentonite fluid used in the stabilization of bore holes in horizontal boring applications. These pumps range from up to 18.5 GPM – 84.5 GPM and up to 1500 PSI. All of these pumps are made of cast Iron fluid ends with solid ceramic plungers provide long life. And the gear end construction of heavy-duty cast iron crankcase, glazed, hardened and ground crankshaft and aluminum-bronze bearings provide years of life. With a seal life of 300-400 hours you can expect Performance Under Pressure with Giant.

BP5236

Volume:………………………………………Up to 18.5 GPM

Discharge Pressure:………………………….Up to 900 PSI

Speed:…………………………………………Up to 570 RPM

Inlet Pressure:…………………………………-4.35*-150PSI

Power Consumption:…………………………………..12 HP

Plunger Diameter:………………………………………36mm

Plunger Stroke:…………………………………………42mm

Crankshaft Diameter:………………………………….35mm

Key Width: ……………………………………………….8mm

Shaft Rotation:……………Top of pulley towards manifold

Temperature of Pumped Fluids: ……………Up to 104°F

Inlet Ports:……………………………………..(2) 1-1/2″ NPT

Discharge Ports:…………………………………..(2) 1″ NPT

Weight:………………………………………………….120 lbs.

Crankcase Oil Capacity:…………………………..116 fl.oz.

Fluid End Material:………………………………….Cast Iron

BP6150

Volume:……………………………………..Up to 42.3 GPM

Discharge Pressure:……………………….Up to 1500 PSI

Speed:………………………………………..Up to 600 RPM

Inlet Pressure:……………………………….-4.35* -150PSI

Power Consumption:………………………………..43.8 HP

Plunger Diameter:……………………………………..50mm

Plunger Stroke:………………………………………..48mm

Crankshaft Diameter:…………………………………45mm

Key Width: …………………………………………….12mm

Crankshaft Mounting:…………………………..Either side

Temperature of Pumped Fluids: …………..Up to 104 oF

Inlet Ports:…………………………………….(2) 2-1/2″ NPT

Discharge Ports:…………………………….(2) 1-1/4″ NPT

Weight:……………………………………………..275.5 lbs.

Crankcase Oil Capacity:…………………………..1.1 Gal.

Fluid End Material:………………………………..Cast Iron

BP7170

Volume:………………………………………Up to 84.5 GPM

Discharge Pressure:……………………….Up to 1015 PSI

Speed:………………………………………..Up to 560 RPM

Inlet Pressure:………………………………..-4.35* -150PSI

Power Consumption:…………………………………..59 HP

Plunger Diameter:………………………………………70mm

Plunger Stroke:…………………………………………52mm

Crankshaft Diameter:………………………………….48mm

Key Width: ………………………………………………14mm

Crankshaft Mounting:…………………………….Either side

Temperature of Pumped Fluids: ……………Up to 104 oF

Inlet Ports:……………………………………..(2) 2-1/2″ NPT

Discharge Ports:……………………………..(2) 1-1/4″ NPT

Weight:………………………………………………….423 lbs.

Crankcase Oil Capacity:…………………………….1.1 Gal.

Fluid End Material:………………………………….Cast Iron

GIANT Light Industrial Pumps

Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End
HR2020	1.8	2000	3450	3.3	Brass
HR2527	2.5	2700	3450	4.6	Brass
HR3025	3.0	2500	3450	6.8	Brass
HR3030	3.0	3000	3450	6.2	Brass

Weight: 9 lbs. Bore Size: 3/4″ for HR2527, 1″ for HR3030 Max. Temperature: 80 degree F Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT
GIANT HIGH TEMPERATURE PUMPS

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End	Shaft (mm)
P46HT	2.1	900	750	1.3	Brass	18
P46W-HK+	4.5	1700	1655	5.3	Brass	18
P56HT	3.2	900	750	2.0	Brass	22
P56W-HK+	7.1	2500	1655	10.2	Brass	22
MP4130HT	10.5	1200	750	8.6	Al. Bronze	28
MP4130HTC*	10.5	1200	750	8.6	Al. Bronze	28
LP121HT	17.6	1200	570	14.6	Al. Bronze	35
LP121HTC*	17.6	1200	570	14.6	Al. Bronze	35

Max. Temperature: 220 oF + Max. Temperature: 190 oF * HTC = Pumps with coolant connection

GIANT CORROSION RESISTANT PUMPS

Aluminum Bronze Manifolds & 316 Stainless Steel Internal Wet End Parts

Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Weight (lbs)	Shaft (mm)
P221AR-3100	2.3	2000	1750	3.2	12	24
P217A-3100	3.4	2000	3450	4.7	12	24
P218A-3100	3.4	2000	1750	4.7	12	24
P219A-3100	4.2	2000	1750	5.8	12	24
P220A-3100	4.7	2000	1750	6.4	12	24
P230A-3100	1.1	2000	1750	2.8	12	24
P420A-3100	13.0	1700	1460	15.2	37	28
P430A-3100	5.5	5000	1460	19.0	37	28
MP4130-3100	15.2	1900	1085	20.0	72	28
LP122A-3100	39.0	1300	885	34.5	116	32
GP6145A-3100	46.2	1740	800	55.8	309	42
GP7155A-3100	66.0	1500	700	70.5	455	48

316 Stainless Steel Manifolds and Internal Wet End Parts

Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Weight (lbs)	Shaft (mm)
P221A-5100	2.3	2000	1750	3.2	12	24
P217A-5100	3.4	2000	3450	4.7	12	24
P218A-5100	3.4	2000	1750	4.7	12	24
P218A-5100E	3.4	2000	1750	4.7	12	24
P219A-5100	4.2	2000	1750	5.8	12	24
P219A-5100E	4.2	2000	1750	5.8	12	24
P220A-5100	4.7	2000	1750	6.4	12	24
P220A-5100E	4.7	2000	1750	6.4	12	24
P56-5100	7.1	2100	1655	10.2	22	18
P420A-5100	13.0	1700	1460	15.2	37	28
LP121A-5100	36.0	1300	885	32.1	116	35
GP5145-5100	43.3	1500	750	44.8	179	35
GP7155-5100	66.0	1500	700	70.5	455	48
P230A-5100	1.1	2000	1750	2.8	12	24
P55-5100	4.9	2320	1420	7.8	18	24
P450-5100	5.5	5000	1450	19	37	28
P422-5100	10	2200	1450	15.2	37	28
LP301A-5100	14.2	4000	1000	39.2	119	35
LP600-5100	9.8	6000	1000	40.6	119	35
LP250A-5100	26	2200	1000	39.4	119	35
GP5136-5100	33.8	2300	910	53.6	179	35
GP7142-5100	38.4	2600	700	68.9	374	52

GIANT CO2 Pumps

CP205

Flow:…………………………………Up to 0.21 GPM

PSI:…………………………………….2000/2500 PSI

RPM:……………………………………………….1750

Inlet Ports: ……………………………..(2) 1/2″ BSP

Discharge Ports: ………………………(2) 3/8″ BSP

Temp. of pumped fluids:……………………….-40oF

Weight:…………………………………..11 lbs. 11oz

CP218

Flow:…………………………………..Up to 1.4 GPM

PSI:……………………………………………2030 PSI

RPM:…………………………………………………750

Inlet Ports:……………………………….(2) 1/2″ BSP

Discharge Ports:……………………….(2) 3/8″ BSP

Temp. of pumped fluids:……………………….-40oF

Weight:……………………………………11 lbs. 11oz.

CP220

Flow:…………………………………Up to 1.93 GPM

PSI:……………………………………………2030 PSI

RPM:…………………………………………………750

Inlet Ports: ……………………………..(2) 1/2″ BSP

Discharge Ports: ………………………(2) 3/8″ BSP

Temp. of pumped fluids:……………………….-40oF

Weight:…………………………………..11 lbs. 11oz.

CP420

Flow:…………………………………Up to 6.4 GPM

PSI:…………………………………………..1810 PSI

RPM:…………………………………………………750

Inlet Ports: ……………………………..(2) 3/4″ NPT

Discharge Ports: ………………………(2) 3/4″ NPT

Temp. of pumped fluids:……………………….-40oF

Weight:…………………………………..11 lbs. 11oz

CGP7155

Flow:…………………………………Up to 51.5 GPM

PSI:……………………………………………1450 PSI

RPM:………………………………….Up to 550 RPM

Inlet Ports:…………………………….(2) 2-1/2″ NPT

Discharge Ports:……………………..(2) 1-1/4″ NPT

Temp. of pumped fluids:……………………….-40oF

Weight:………………………………………….455 lbs

CLP200

Flow:…………………………………Up to 9.5 GPM

PSI:…………………………………………..1750 PSI

RPM:………………………………………………..500

Inlet Ports: ………………………..(2) 2X1-1/4″ BSP

Discharge Ports: …………………….(2) 2X1 ” BSP

Temp. of pumped fluids:……………………….-40oF

Weight:………………………………….. 119 lbs.

CLP121A

Flow:…………………………………Up to 16.3 GPM

PSI:……………………………………………1740 PSI

RPM:…………………………………. 500 RPM

Inlet Ports:…………………………….(2) 1-1/4″ BSP

Discharge Ports:……………………. (2) 1-1/4″ BSP

Temp. of pumped fluids:……………………….-40oF

Weight:………………………………………….119 lbs

GIANT Industrial Triplex Plunger Pumps

P46/P55/P56 Pumps

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End	Notes
P57	1.4	6500	1420	6.0	S.S.
P46	3.9	2200	1420	5.3	Brass
P55	6.0	2320	1750	10.2	Brass
P56	7.5	2200	1750	10.2	Brass
P56-5100	7.1	2100	1655	10.2	316 S.S.	Standard Seals
P56-5111	7.1	2100	1655	10.2	316 S.S.	Viton Seals
P56-5121	7.1	2100	1655	10.2	316 S.S.	Teflon/Viton Seals

* Includes Pump, Unloader, Pop-off valves, Two Guns, Pressure Switch, Thermal Relief Valve Weight: 18 lbs. Shaft Size: 18mm for P46W, 22mm for P55, P56, P56-5100, P57, 24mm for P54, P58, P59 Max. Temperature: 160 degree F

P54/P58/P59 Pumps

Pump Model	Max. GPM	PSI Continuous	PSI Intermittent	Max. RPM	Req’d BHP	Fluid End
P54	4.8	4000	3300	1750	11.0	Brass
P54GB	4.8	4000	3300	1750	11.0	Brass
P58	6.0	3500	3000	1750	12.1	Brass
P58GB	6.0	3500	3000	1750	12.1	Brass
P59	9.0	1900	1000	1750	10.0	Brass
P59GB	9.0	1900	1000	3500	10.0	Brass
P59DG*	9.0	1900	1000	3500	10.0	Brass

Inlet Port & Discharge Port:

Pump Model	Inlet Port	Discharge Port
P46/P55/P56/P56-5100/P56-5100/P57	(2) 1/2″ BSP	(2) 3/8″ BSP
P54/P58/P59	(2) 3/8″ BSP & (1) 1/2″ BSP	(2) 3/8″ BSP

GIANT SP Pumps

Pump Model	Max. GPM	Max. PSI	Max. RPM	BHP	Max. Temp. F
SP100W	11.2	2000	1420	14.5	160° F
SP351W	6.7	3200	1420	14.8	160° F

Weight: 30 lbs. Shaft Size: 28mm Max. Temperature: 160 degree F Inlet Port: (2) 3/4″ NPT Discharge Port: (2) 3/8 ” NPT

GIANT MP Series Pumps

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End	Note
MP4120W	8.7	3600	1420	21.8	Al. Bronze
MP4124W	12.6	3000	1420	21.0	Al. Bronze
MP4130	15.2	1900	1085	20.0	Al. Bronze

Weight: 72 lbs. Shaft size: 28 mm Max. Temperature: 160 oF

Port sizes:

Pump Model	Inlet Port	Discharge Port
All	(2) 1” NPT	(2) 3/4″ NPT

GIANT LP Series Pumps


LP301	LP1000	LP700

Giant LP Series – High Pressure

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End	Note
LP1000	3.4	15000	1000	35.2	S.S
LP700	7.9	7250	1000	39.8	S.S
LP600	9.7	6000	1000	40.4	S.S
LP301A	14.1	4000	1000	50.0	S.S
LP400	15.1	3600	1000	37.6	Al. Bronze
LP301A*	18	4000	1270	49.7	S.S
LP200	19.0	2900	1000	38.4	Al. Bronze
LP450	19.7	2600	1000	35.5	Al. Bronze
LP350	22.6	2350	1000	36.1	Al. Bronze

GIANT LP Series – High Flow

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End	Note
LP250	26.0	2200	1000	39.7	Al. Bronze
LP255	26.0	2200	1000	39.7	Brass
LP122A	39.0	2000	885	56.3	Al. Bronze
LP123	39.0	2000	885	56.3	Brass

* Intermittent duty only

Weight: 116 lbs. Shaft Size: 35mm

Max. Temperature: 140 degree F (104 F for LP1000)

Inlet Port & Discharge Port:

Pump Model	Inlet Port	Discharge Port
LP200/LP301A/LP600	(3) 1-1/4″ BSP	(2) 1″ BSP
LP350/LP400/LP450	(2) 1-1/4″ BSP	(1) 1″ BSP
LP700	(2) 3/4″ NPT	(2) 1/2″ NPT
LP1000	(3) 1/2″ BSP	(2) 3/8″ BSP
LP122/LP122A-4000/LP123	(2) 1-1/2″ NPT	(2) 1″ NPT
LP250/LP255	(3) 1-1/2″ BSP	(3) 1″ BSP

GIANT GP Series Pumps


GP7124A	GP7255A

GIANT GP Series – High Pressure

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End	Notes
GP7122	9.9	10150	750	69.3	S.S
GP7124A	12.7	7250	750	65.7	S.S
GP6124	12.8	5800	800	53.1	S.S
GP6128	18.0	4000	800	51.0	S.S
GP7132	23.4	4350	750	73.0	S.S
GP7136	28.3	3650	750	73.0	S.S
GP5132	27.7	2900	1000	60.0	Cast Iron

GP51 weight: 179 lbs	Shaft Size: 35mm	Max. Temperature: 140 oF
GP61 weight: 309 lbs	Shaft Size: 42mm	Max. Temperature: 140 oF
GP71 weight: 374 lbs	Shaft Size: 48mm	Max. Temperature: 140 oF

GP Series – High Flow

Pump Model	Max. GPM	Max. PSI	Max. RPM	Req’d BHP	Fluid End	Note
GP5136	33.8	2300	960	53.1	Cast Iron
GP5145	43.5	1500	750	44.8	Cast Iron
GP7150A	54.5	1900	700	74.0	Al. Bronze
GP7155	65.8	2000	700	55.3	Al. Bronze
GP7255A	66.0	2000	700	94.3	Cast Iron

GP51 weight: 179 lbs	Shaft Size: 35mm	Max. Temperature: 140 oF
GP61 weight: 309 lbs	Shaft Size: 42mm	Max. Temperature: 140 oF
GP71 weight: 374 lbs	Shaft Size: 48mm	Max. Temperature: 140 oF

Inlet Port & Discharge Port:

Pump Model	Inlet Port	Discharge Port
GP5132/GP5136/GP5145	(2) 1-1/2″ BSP	(2) 1″ BSP
GP6124/GP6124-4000/GP6128	(2) 1-1/2″ BSP	(2) 1″ BSP
GP6132/GP6140/GP6145/GP6145-4000	(2) 2-1/2″ NPT	(2) 1-1/4″ NPT
GP7122	(2) 1-1/4″ BSP	(2) 3/4 ” BSP
GP7124A/GP7128/GP7132	(2) 1-1/4″ NPT	(2) 3/4″ NPT
GP7136	(2) 1″ NPT	(2) 1-1/4″ NPT