Sep 30 2011

CAT Pump 8058 Direct Drive Gearbox

CAT Pump 8058 Direct Drive Gearbox Helical -1-1/8″ Shaft, Gearbox Pump: 51G118, 58G118 Used on Models 51 and 58 Pump.

The CAT Pump 8058 Direct Drive Gearbox Features:

  • Polished solid ceramic plungers last long and resist abrasion.
  • Triplex plunger design providing low pulsation and quiet operation.
  • Internally lubricated and cooled packings for extended life.
  • No pulley selection or adjustment for quick, easy gas engine mounting.
  • Totally sealed housing providing independent
  • gearbox lubrication for maximum service life. Hardened steel helical design gears for smooth, quiet operation.
  • Multiple engine shaft and flange options for flexibility.
CAT Pump 8058 Direct Drive Gearbox

CAT Pump 8058 Direct Drive Gearbox

The CAT Pump 8058 Direct Drive Gearbox has the following specifications:

  • Gear Ratio ………………………… 2.0384 to 1 (2.0384 to 1)
  • Mounting Face…………………… 6-1/2″ (165 mm)
  • Engine Shaft Diameter……………………………………….. 1″ (25.4 mm)……………………………………….. 1-1/8″ ( 28.5 mm)
  • Engine Shaft Length…………… 3-1/4″ (82.6 mm)
  • Gearbox Capacity………………. 10 oz. (0.30 L)
  • Weight 8051, 8058, 8061, 8065, 8068…. 4.2 lbs. (1.90 kg) 8071, 8078 ………………………… 7.5 lbs. (3.40 kg)
  • Dimensions……………………….. 6.42 x 4.53 x8.19″ (163x115x208 mm)
  • Flow…………………………………. 5.0 GPM (19 L/M)
  • Pressure Range ………………… 100 to 2500 PSI (7 to 175 BAR)
  • Inlet Pressure Range………….. Flooded to 60 PSI (Flooded to 4 BAR)
  • Maximum Pump RPM…………. 1570 RPM (1570 RPM)
  • Maximum Engine RPM……….. 3200 RPM (3200 RPM)
  • Bore…………………………………. 0.708″ (18 mm)
  • Horsepower-Electric …………… 8.6 HP (8.6 HP)
  • Stroke ………………………………. 0.669″ (17 mm)
  • Pump Crankcase Capacity….. 25 oz. (0.75 L)
  • Weight ……………………………… 30.7 lbs. (13.9 kg)
  • Dimensions with .B…………….. 13.58 x 10.75 x 8.19″ (345 x 273 x 208 mm)
  • See Models 53, 58, 55, 51 data sheet for pump information.
CAT Pump 8085 Direct Drive Gearbox - Exploded Parts View

CAT Pump 8085 Direct Drive Gearbox - Exploded Parts View

List Price: $685.00
Our Price: $685.00
Sale Price: $600.00 Direct Drive Gearbox
You save $85.00!
Direct Drive Gearbox
Availability:: available for order
Product Code: 8058

SERVICING THE CAT Pump 8058 Direct Drive Gearbox DIS-ASSEMBLY
1. Completely drain lube from the direct drive gearbox housing.
2. Remove the four HHC screws which fasten the direct drive gearbox to the engine and separate gearbox and pump from engine.
3. Remove the four HHC screws which fasten the direct drive gearbox to the bearing cover flange and separate gearbox housing from pump.
4. Place gearbox housing on work surface with seal facing up.
5. Remove pinion oil seal by inserting screwdriver between pinion gear and inner lip of seal and pry out. Seal will be damaged and must be replaced.
6. Remove large retaining ring in groove below the pinion oil seal using retaining ring pliers and set aside for re-use.
7. Remove the pinion gear and bearing. Turn direct drive gearbox housing over onto engine mount flange surface. Bearing is pressed into position so it is necessary to press pinion and bearing out from rear. Set gearbox housing aside.
8. Remove bearing from pinion gear. Using reverse pliers remove retaining ring from groove on pinion gear and press bearing from pinion. Set aside pinion, bearing and retaining ring.
9. Remove hex machined retaining screw, lockwasher and flat holding washer from center of helical drive gear on pump shaft.
10. Slip helical drive gear from crankshaft.
11. Remove key from keyway in pump crankshaft. At this point the direct drive gearbox has been disassembled. Now begin examination of the gearbox parts for wear and reassembly. While the gearbox is in this state of disassemble, it is advisable to examine your pump for any indication of drive-end wear. If any of the following conditions are present, removal of the bearing cover flange is necessary. Only trained technicians should service drive end.
– Leakage between bearing cover flange and pump crankcase.
-Evidence of water in pump crankcase.
-Evidence of water in gearbox crankcase.
NOTE: If removal of bearing cover flange is necessary, completely drain oil from crankcase of pump.REMOVING BEARING COVER FLANGE
1. Remove the HSH screws, lockwashers and washers from bearing cover flange.
2. Tap flange with soft mallet to separate from pump crankcase.
3. Examine pump bearing and replace if worn.
4. Examine oil seal in bearing cover flange and replace if worn.
5. Examine gasket on outside of bearing cover flange and replace if cut or cracked.
6. Examine o-ring on inside outer groove of bearing cover flange and replace if cut or worn. If further pump servicing is needed, refer to your pump service manual, and Tech Bulletin 035 on “Servicing Crankcase Section”.REPLACING BEARING COVER FLANGE
1. Line up the four holes and mount gasket on outside of bearing cover flange. Note: Models 56, 59, 60 and 70 have dual bearings and eight screws.
2. Press new seal into bearing cover flange after exercising caution not to cut seal on keyway edge.
3. Line up the inside mounting holes on bearing cover flange with the holes on the pump. Keep the two outer “flanged” mounting holes to the top rear and lower front.
4. Apply Loctite-242 to the threaded area of screws before replacing. Torque per chart.REASSEMBLY of the CAT Pump 8058 Direct Drive Gearbox
1. Insert key into pump crankshaft keyway until flush with end of shaft.
2. Examine helical drive gear teeth for wear and replace if necessary. Line up keyway on gear with pump shaft keyway and key and slide onto shaft.
3. Install flat holding washer, lockwasher and retaining screw onto shaft and torque per chart.
4. Examine gearbox oil gauge and oil drain plug for any evidence of leaking and replace o-ring and gasket if necessary.
5. Examine pinion bearing for wear and replace if necessary.
6. Examine pinion gear teeth for wear and replace if necessary.
7. Press bearing over pinion gear until seated on shoulder. (Models with dual bearings; press first bearing on until seated; then second bearing until seated up to first bearing.)
8. Install retaining ring on pinion gear and snap into groove.
9. Insert pinion and gear assembly into gearbox housing and press into position until seated on shoulder. Groove for large retaining ring must be visible.
10. Insert large retaining ring into pinion bearing housing and snap into groove.
11. Lubricate I.D. and O.D. of new pinion oil seal. Place oil seal at mouth of pinion bearing housing with garter spring facing down. Carefully press seal into position until seated on retaining ring. Keep seal square in position to avoid inner lip hanging up on pinion gear edge.
12. Rotate pinion gear so keyway is up. Mount assembled gearbox housing onto pump shaft with helical drive gear. NOTE: Carefully match gear teeth and line up mounting holes. Place engine mounting flange in forward position.
13. Install the screws to fasten gearbox to bearing cover flange. Torque per chart.MOUNTING the CAT Pump 8058 Direct Drive Gearbox ONTO ENGINE
1. Rotate crankshaft of engine until keyway is at top.
2. Insert key into keyway and generously apply Loctite 76764 antiseize lubricant to engine shaft.
3. Line up keyway of pinion gear and engine shaft and carefully slip gearbox onto engine shaft until flush with engine face. Install four hex machined screws. Torque per chart. NOTE: Due to varying engine shaft lengths it may be necessary to install a small spacer on each of the four (4) hex machined screws between gearbox flange and engine face.
4. Before starting operation, fill gearbox housing to oil gauge dot with 80-90 weight gear lube and fill crankcase of pump to oil gauge dot with CAT PUMPS Special Premium Grade Non-detergent Oil.FIELD CONVERSION FROM STANDARD PUMP
To convert from a standard pump to a direct drive gearbox pump, remove the existing bearing cover, gasket and four combination head screws. Replace with new direct drive gearbox bearing cover flange, gasket, four lockwashers and new hex socket flat head screws. The bearing for the 51, 56, 58, 59 and 60 pumps is a tapered roller bearing with outer race. Remove the standard bearing cover from the pump. Remove outer race from bearing cover by gently pounding on work surface to unseat. Then use a bearing puller tool to pull race from bearing cover. Next press outer race into gearbox bearing cover flange. Be certain race is completely seated in flange before mounting onto pump.


Permanent link to this article: https://etscompany.com/wordpress/2011/09/30/cat-pump-8058-direct-drive-gearbox/

Sep 29 2011

CAT Pump 1057 – Pressure Washer Pump

Nickel Aluminum Bronze Model CAT Pump 1057

This CAT Pump 1057 Features:

  • Triplex plunger design provides smoother liquid flow.
  • V-Packings are completely lubricated and cooled by the liquid being pumped.
  • Special ported inlet manifold permits an external flush liquid providing cooling for hi-temp liquids and lubrication for low lubricity liquids.
  • Lubricated Lo-Pressure Seals provide double protection against external leakage.
  • Oil bath crankcase assures optimum lubrication.
  • Close tolerance concentricity of the ceramic plunger offers perfect alignment and maximizes seal life.
  • Precision design 304 and 316 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life.
  • Brass, Stainless Steel, Duplex SS or Nickel Aluminum Bronze manifolds for strength and corrosion resistance.
  • Special concentric, high-density, polished, solid ceramic plungers
  • provide a true wear surface and extended seal life.
  • Specially formulated, CAT PUMP exclusive, V-Packings offers unmatched performance and seal life.
  • Die cast aluminum crankcase provides high strength, minimum weight and precision tolerance control.
  • Chrome-moly crankshaft gives unmatched strength and surface hardness.
  • Oversized crankshaft bearings with greater loading capacity mean longer bearing life.
  • Wet-end easily serviced without entering crankcase.
  • Valve assemblies are accessible without disturbing piping.
  • Interchangeable inlet and discharge valve assemblies.
  • Preset seals require no packing adjustment.

CAT Pump 1057 Pressure Washer Pump Parts Breakdown PDF click here.

To get the service manual for this CAT Pump 1057 pressure washer pump click here.

CAT Pump 1057 - Pressure Washer Pump

CAT Pump 1057 - Pressure Washer Pump

This CAT Pump 1057 has the following Specifications:

  • Bore…………………………………………………………….0.945” (24 mm)
  • Stroke………………………………………………………….1.180” (30 mm)
  • Crankcase Capacity……………………………………….42 oz. (1.26 l)
  • Inlet Ports (2)…………………………………………..3/4” NPTF (3/4” NPTF)
  • Flushing Ports (2) (1051C)…………………………1/8” NPTF (1/8” NPTF)
  • Discharge Ports (2)…………………………………..1/2” NPTF (1/2” NPTF)
  • Pulley Mounting……………………………………… Either Side (Either Side)
  • Shaft Diameter………………………………………………1.181” (30 mm)
  • Weight…………………………………………………………44 lbs. (20 kg)
  • Dimensions………………………………16.28 x 12.99 x 6.44” (414 x 330 x 164 mm)
  • Flow………………………………………………………….. 10 gpm (38 l/m)
  • Pressure Range………………………………. 100 to 2200 psi (7 to 155 bar)
  • RPM……………………………………………………….. 958 RPM (958 RPM)
  • Inlet Pressure Range…………………………….. –5 to 60 psi (–0.35 to 4 bar)
  • Maximum Liquid Temperature ………………………..160°F (70°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
CAT Pump 1057 Exploded Pump Breakdown

CAT Pump 1057 Exploded Pump Breakdown

Our Price: $4,862.00
Call 1-877-824-7763 for a better price
Availability:: available for order
Product Code: 1057
CAT Pressure Washer Pump

Permanent link to this article: https://etscompany.com/wordpress/2011/09/29/cat-pump-1057-pressure-washer-pump/

Sep 28 2011

Mi-T-M Portable Heater Kerosene Forced Air – MH-0400-0M10

Mi-T-M Portable Heater Kerosene Forced Air – MH-0400-0M10

The Frame of the Mi-T-M Portable Heater Kerosene Forced Air – MH-0400-0M10 has  Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles for easy lifting · 13-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug

The Mi-T-M Portable Heater Kerosene Forced Air – MH-0400-0M10 has a Burner Head with : Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

The Motor of the Mi-T-M Portable Heater Kerosene Forced Air – MH-0400-0M10 is: Heavy-duty, high quality cast aluminum enclosed electric motor

Components for the Mi-T-M Portable Heater Kerosene Forced Air – MH-0400-0M10 are: Built-in temperature control thermostat with control dial · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-out

The Mi-T-M Portable Heater Kerosene Forced Air – MH-0400-0M10 was Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel

For use in workshops, garages, construction sites and farms with proper ventilation.

Mi-T-M Portable Heater Kerosene Forced Air - MH-0400-0M10

Mi-T-M Portable Heater Kerosene Forced Air - MH-0400-0M10

 The Mi-T-M Portable Heater Kerosene Forced Air – MH-0400-0M10 has the following technical specifications:

  • Heat Output 400,000 BTU
  • Hot-Air Flow 1,400 CFM
  • AC Power 120 Volt/60Hz/2.8 Amp
  • Motor Size 1/2 HP
  • Air Pump Pressure 125 PSI
  • Fuel Tank Capacity 24.0 gallons
  • Fuel Consumption 3.05 gal./hr.
  • Max. Operating Hours 8.0 hours
  • Heating Area 10,000 sq ft.
  • Multi-Fuel Capable Yes
  • Net Weight 143 lbs.
  • Shipping Weight 152 lbs.
  • Length 58 in.
  • Width 30 in.
  • Height 25 in.

List Price: $2,215.00
Our Price: $1,882.75 
You save $332.25!

Availability:: available for order
Product Code: MH-0400-0M10
Mi-T-M Portable Heater

Permanent link to this article: https://etscompany.com/wordpress/2011/09/28/mi-t-m-portable-heater-kerosene-forced-air-mh-0400-0m10/

Sep 28 2011

AR Annovi Reverberi Pump RRV4G36D-F24 – Pressure Washer Pump

These new Annovi Reverberi Pressure Washer  Pumps –  RRV4G36D-F24 feature a new rod design, large side cover sight glass, ceramic plungers, high quality high pressure seals, new, low-pressure seal with scraper (patented), two piece plunger guides, forged brass high efficiency head design and new styling. Flows to 5.5 GPM, Pressure to 3600 PSI, RPM 1450, 1750 & 3400. The pumps come in three drive types: 24mm solid, 1” and 1-1/8” hollow shaft. Drivers: electric, gasoline, hydraulic or diesel.

Annovi Reverberi RRV4G36D-F24 - Pressure Washer Pump

Annovi Reverberi RRV4G36D-F24 - Pressure Washer Pump

The Annovi Reverberi RRV4G36D-F24 – Pressure Washer Pump Features:

  • Manifold: High strength forged brass for long term use.
  • Bolts: Eight 6mm.
  • Plungers: NEW Ceramic Plungers, thicker wall to help prevent thermal shock.
  • Valves: Stainless Steel, valve seat o-ring is side mounted.
  • Seals: High quality high pressure seals. NEW low-pressure seal with a built in scraper.
  • Piston Guides: Two piece piston guides.
  • Drive End: NEW connecting rod with 12% more load surface.
  • Large side cover sight glass, oversized bearing. Rear cover oil drain.
  • Crankshaft: Forged, precision ground.

The Annovi Reverberi RRV4G36D-F24 – Pressure Washer Pump has the following technical specifications:

  • Max GPM……………… 4.0
  • Max LMP………………………… 15.1
  • Max PSI…………………. 3600
  • Max Bar…………………………. 248
  • Power EBHP…………… 9.9
  • Bore Dia. mm……………………. 15
  • Stroke mm………………. 9.2
  • Weight Lbs……………………….. 18
  • Max Temp………………. 140°
  • Oil Capacity……………………… 13.35oz
  • Inlet Thread …………… 1/2”F
  • Discharge Thread………………. 3/8”F

List Price: $576.80
Our Price: $362.08 
You save $214.72!

Availability:: available for order
Product Code: RRV4G36D-F24
AR Pressure Washer Pump

Permanent link to this article: https://etscompany.com/wordpress/2011/09/28/ar-annovi-reverberi-pump-rrv4g36d-f24-pressure-washer-pump/

Sep 27 2011

SUNTEC FUEL PUMP – A2VD-7119

SUNTEC FUEL PUMP – A2VD-7119, Rotation and Nozzle Location as Viewed from Shaft End: LH-RH, 3450 RPM Speed, Nozzle Capacity at Rated PSI (GPH): 3, Rated Pressure: 100.

This SUNTEC FUEL PUMP – A2VD-7119 Features:

  • Contamination resistant control valve
  • No leak easy flow bleed valve
  • High contact ratio precision matched gears for long life
  • Double-lip shaft seal
  • Original diaphragm/cone valve
  • Involute tooth-form gears for quiet operation
  • Two-stage units for high lift application
  • Factory set at 100 PSI Pressure adjustable from 100 to 200 PSI @ 3450 RPM, 100 to 200 PSI @ 1725 RPM
  • Lift or gravity feed applications with 10 PSI maximum inlet/return pressure
  • Suitable for No. 1 and No. 2 fuel oil or kerosene
  • May be mounted in any position, except upside down
  • L86-145 through L86-148 are for installations requiring up to 6″ HG vacuum single pipe and 12″ HG vacuum two pipe
  • L86-149 and L86-150 are rated to 17″ HG vacuum two pipe
SUNTEC FUEL PUMP - A2VD-7119

SUNTEC FUEL PUMP - A2VD-7119

The SUNTEC FUEL PUMP – A2VD-7119 has the following specifications:

  • Stages Single
  • Strainer & Nozzle Rating @ 100 PSI 3 GPH
  • Nozzle Port Location RH
  • RPM 3450
  • Rot. LH
  • Shipping Weight 3.50
  • Shipping Width 4.30
  • Shipping Length 4.40
  • Shipping Height 5.30

List Price: $108.46
Our Price: $100.00
You save $8.46!
Availability:: available for order
Product Code: A2VD-7119

Permanent link to this article: https://etscompany.com/wordpress/2011/09/27/suntec-fuel-pump-a2vd-7119/

Sep 27 2011

CAT Pump 280 – 3 Frame Piston Pump – Pressure Washer Pump

CAT Pump 280  – 3 Frame Piston Pump Brass Model – Pressure Washer Pump, 3.0/1000, 1330 RPM, BBCP.

Need parts for the CAT Pump 280  – 3 Frame Piston Pump Brass Model – Pressure Washer Pump?
Click here for the datasheet.
Click here for servicing instructions.

CAT Pump 280 - 3 Frame Piston Pump - Pressure Washer Pump

CAT Pump 280 - 3 Frame Piston Pump - Pressure Washer Pump

This pressure washer pump – CAT Pump 280 – 3 frame piston pump has the following Features:

  • Triplex UNIFLOW design provides a smooth, low-pulsation flow with strong suction capabilities.
  • Hard chrome-plated 304S cylinders and sleeves provide long life with mild liquids within a range of 5-9 PH.
  • Optional 316 Stainless Steel manifolds for added strength and corrosion resistance.
  • Optional FPM and PTFE elastomers for liquid compatibility.

The CAT Pump 280 – 3 Frame Piston Pump – Pressure Washer Pump has the following specifications:

  • Inlet Pressure Range…………………–8.5 to 40 psi (–0.6 to + 2.8 bar)
  • Bore…………………………………………………..0.787” (20 mm)
  • Crankcase Capacity……………………………..10 oz. (.3 l)
  • Maximum Liquid Temperature……………….160°F (71°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Port (1)…………………………………..1/2” NPTF (1/2” NPTF)
  • Chemical Injection Port (1)………………1/4” NPTF (1/4” NPTF)
  • Discharge Ports (2)…………………………3/8” NPTF (3/8” NPTF)
  • Discharge Port (1)…………………………..1/2” NPTF (1/2” NPTF)
  • Pulley Mounting……………………………..Either side (Either side)
  • Shaft Diameters…………………………………..0.650” (16.5 mm)
  • Dimensions (280)……………..10.63 x 8.79 x 5.30” (270 x 223 x 134.5 mm)
  • Dimensions (290)……………..10.83 x 8.79 x 5.30” (275 x 223x 134.5 mm)
  • Flow…………………………………………3.0 gpm (11.4 l/m)
  • Pressure Range………………100 to 1000 psi (7 to 70 bar)
  • RPM………………………………………1330 rpm (1330 rpm)
  • Stroke………………………………………..0.394” (10 mm)
  • Weight…………………………………….11.7 lbs. (5.3 kg)

List Price: $925.58
Our Price: $712.23 
You save $213.35!
Availability:: available for order
Product Code: BAPL-4467
PSI: 1000
GPM: 3
CAT Pressure Washer Pump

Permanent link to this article: https://etscompany.com/wordpress/2011/09/27/cat-pump-280-3-frame-piston-pump-pressure-washer-pump/

Sep 26 2011

AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump

AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump WITH EASY START VALVE has: 2.2 GPM 2400 PSI 3400 RPM GAS ENGINE FLANGE BUILT-IN PRESSURE CONTROL & CHEMICAL INJECTOR

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has the following: INPUT: FEMALE GARDEN HOSE OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT), CONVENIENT CONNECTION TO MOST 7/8″ SHAFT ENGINES, PUMP IS PREFILLED WITH OIL.

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has START VALVES ALLOW FOR EASY ENGINE STARTING.

This AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump is COVERED BY AR ONE YEAR WARRANTY.

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump Features:

  • Annovi Reverberi /AR North America RMW2.2G24-EZ, RMW 22G24-EZ, RMW 2.2G24-EZ Vertical Radial-Axial series replacement pump (Mounts under the engine)
  • Axial Cam Pump with Easy Start is smooth starting and maintenance free
  • Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 2nd image)
  • NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.
  • Some Briggs models and units made by Briggs Power Products ( Brute, Craftsman, John Deere, Troy-bilt, Etc.) are Back Mounted / turned 180º (see RMW2.2G24-EZSX)
  • RMW pumps fit most vertical engines (pump under the motor) with a 7/8″ straight keyed shaft.
  • RMW pumps have a standard 22mm-14 twist connect outlet.
  • Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.

The AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump has the following specifications:

  • Vertical Mount with Gas Flange 3-6 HP
  • Max. Volume: 2.2 GPM
  • Max. Discharge Pressure: 2,400 PSI
  • Max. Pump Speed: 3,400 RPM
  • Shaft Diameter: 7/8” Hollow
  • Engine shafts longer that 2” will require spacers or washers
  • Built In unloader and chemical injector
  • Built In easy start valve
  • Maximum Horsepower Requirements: 5.0 GHP
  • Inlet Port: 3/4″ FGH (garden hose)
  • Outlet Port: 22mm (Twist Connect)
  • Aluminum manifold w/aluminum valve plugs
  • Stainless steel plungers
  • Pump comes with oil
  • Weight: 5.1 lb.
AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump

AR (ANNOVI REVERBERI) RMW2.2G24-EZ Pressure Washer Pump

List Price: $244.01
Our Price: $157.21  RMW2.2G24-EZ
You save $86.80!
Availability:: available for order
Product Code: RMW2.2G24-EZ
Annovi Reverberi Pressure Washer Pump

Permanent link to this article: https://etscompany.com/wordpress/2011/09/26/ar-annovi-reverberi-rmw2-2g24-ez-pressure-washer-pump/

Sep 26 2011

Mi-T-M Portable Heater Kerosene Indirect Ductable – MH-0092-0MIH

Mi-T-M Portable Heater Kerosene Indirect Ductable – MH-0092-0MIH

The Mi-T-M Portable Heater Kerosene Indirect Ductable – MH-0092-0MIH has a Frame of Powder coated steel frame, handle and tank · Heavy-duty tires for easy mobility

The Mi-T-M Portable Heater Kerosene Indirect Ductable – MH-0092-0MIH Burner is  Stainless-steel combustion chamber · Direct spark ignition

It’s Motor: Heavy-duty, high quality cast aluminum electric motor

The Mi-T-M Portable Heater Kerosene Indirect Ductable – MH-0092-0MIH has the following Components: Safety switch prevents overheating · Thermostatically controlled · Suitable for air ducting · Easy to operate controls · High capacity fuel tank · Electronic flame control · Automatic ignition · Water resistant control box · Automatic fuel shut-off · Rotary pump compressor · Compact design · Thermostat plug

Functions on: Kerosene or No. 1 and No. 2 fuel oil.

For use on construction sites and applications where the heat will be ducted into a building.

Specifications subjet to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information.

Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.

View Product Information Sheet for Mi-T-M Portable Heater Kerosene Indirect Ductable – MH-0092-0MIH

Mi-T-M Portable Heater Kerosene Indirect Ductable - MH-0092-0MIH

Mi-T-M Portable Heater Kerosene Indirect Ductable - MH-0092-0MIH

The Mi-T-M Portable Heater Kerosene Indirect Ductable – MH-0092-0MIH has the following specifications:

  • Heat Output 92,000 BTU
  • Temperature Rise 120°F
  • Max. Output Temperature 240°F
  • Heated Air Output 557 CFM
  • Power Consumption 250 watts
  • AC Power 115 Volts/60Hz/1Ø/4.0 Amp
  • Fan Static Pressure 0.5-inch WC
  • Fuel Consumption 0.66 gal./hr.
  • Fuel Tank Capacity 12.2 gallons
  • Max. Operating Hours 18 hours
  • Duct Size (LxDiameter) 15 ft.x12 in.
  • Net Weight 88 lbs.
  • Shipping Weight 93 lbs.
  • Length 36.6 in.
  • Width 22.1 in.
  • Height 24.6 in.

List Price: $1,958.00
Our Price: $1,664.00 
You save $294.00!
Availability:: available for order
Product Code: MH-0092-0MIH
Mi-T-M Portable Heater

Permanent link to this article: https://etscompany.com/wordpress/2011/09/26/mi-t-m-portable-heater-kerosene-indirect-ductable-mh-0092-0mih/

Sep 23 2011

Mi-T-M Portable Heater Kerosene Radiant – MH-0125-1M1R

Mi-T-M kerosene radiant portable heaters maximize radiant output for natural and soothing warmth. These portable heaters will keep you comfortable even with lower air temperatures, whether it is used indoors or outdoors.

This portable heater features a fully enclosed motor, ultra-quiet fuel pump, easily accessible power switch, electronic controls, error indicator light, accessory electrical outlet, overheat and flame-out safety feature, contractor-grade fuel cap, powder-coated fuel tank with fuel gauge, and more.

Mi-T-M Portable Heater Kerosene Radiant – MH-0125-1M1R

Frame: Compact design · Two tires for easy mobility · Easy-lift handle for portability at home or on the job site · Heat safety grille

Motor: Fully enclosed motor for longer life

Heat Output: Adjustable heat height · Clean, quiet, instant radiant heat

Components: Ultra quiet fuel pump · Power switch · Electronic controls · Error indicator light · Integral overheat and flame-out safety · Contractor-grade fuel cap

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel

For use in any outdoor application.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information.

Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.

The Mi-T-M Portable Heater Kerosene Radiant – MH-0125-1M1R Has the following Specifications:

  • Heat Output 95-125,000 BTU
  • Heat Type Radiant
  • AC Power 120 Volt/60Hz/3.15 to 5.0 Amps
  • Fuel Tank Capacity 11 gallons
  • Fuel Consumption Low-0.71 gal./hr. / High-0.9 gal./hr.
  • Max. Operating Hours Low-15.5 hrs. / High-12.2 hrs.
  • Heating Area 3,125 sq. ft.
  • Net Weight 80 lbs.
  • Shipping Weight 94 lbs.
  • Length 24.6 in.
  • Width 27.8 in.
  • Height 38.6 in.

View Product Information Brochure for Mi-T-M Portable Heater Kerosene Radiant – MH-0125-1M1R

Mi-T-M Portable Heater Kerosene Radiant - MH-0125-1M1R

Mi-T-M Portable Heater Kerosene Radiant - MH-0125-1M1R

List Price: $1,580.00
Our Price: $1,343.00 
You save $237.00!
Availability:: available for order
Product Code: MH-0125-1M1R
Mi-T-M Portable Heater

Permanent link to this article: https://etscompany.com/wordpress/2011/09/23/mi-t-m-portable-heater-kerosene-radiant-mh-0125-1m1r/

Sep 23 2011

Annovi Reverberi Pressure Washer Pump RKA4G40HN

Annovi Reverberi Pressure Washer Pump RKA4G40HN4 GPM @ 4000 PSI.
Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation.  Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
Annovi Reverberi Pressure Washer Pump RKA4G40HN

Annovi Reverberi Pressure Washer Pump RKA4G40HN

The Annovi Reverberi Pressure Washer Pump RKA4G40HN Features are:

  • Forged Brass: Strength and no porosity long life. higher hydrostatic pressures – safety, performance.
  • Inlet and Discharge Ports: Heavy bosses for added strength.
  • Offset Discharge Ports: High efficiency, smooth flow.
  • Bolts: Eight bolts, 8mm, grade 8.8.
  • Valve Caps: Stainless steel on pumps rated at 3200 PSI and higher, better hydrostatic loads. Machined brass on pumps <3200 PSI.
  • Ultra Form Cages: Durable, strength, and long life.
  • Poppets, Seat and Spring: 303 and 400 series stainless steel.
  • High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
  • Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life.
  • Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
  • Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
  • Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
  • Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
  • Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
  • Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and Oring plunger sealing system.
  • Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
  • Connecting Rods: One-piece special alloy aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
  • Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
  • Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
  • Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
  • Oil Capacity: 15.5 oz.
  • Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
  • Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
This Annovi Reverberi Pressure Washer Pump RKA4G40HN has the following specifications:
  • Max GPM……………… 4
  • Max LMP………………………… 15.1
  • Max PSI…………………. 4000
  • Max Bar…………………………. 275
  • Power EBHP…………… 11
  • Bore Dia. mm……………………. 18
  • Stroke mm………………. 12
  • Weight Lbs……………………….. 19
  • Max Temp………………. 140°
  • Oil Capacity……………………… 15oz
  • Inlet Thread …………… 1/2”F
  • Discharge Thread………………. 3/8”F

List Price: $854.02
Our Price: $532.74 
You save $321.28!

Availability:: available for order
Product Code: RKA4G40HN
Annovi Reverberi Pressure Washer Pump
PSI: 4000
GPM: 4

Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer.
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.

Permanent link to this article: https://etscompany.com/wordpress/2011/09/23/annovi-reverberi-pressure-washer-pump-rka4g40hn/