Annovi Reverberi SHP Series Pressure Washer Pumps – These AR (Annovi Reverberi) Plunger Pumps are designed with a new high efficincy brass pantented manifold. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium SKF tapered roller bearings and the precision die-cast supports assure proper shaft alignment and maximum life. Valve cages of Ultra-Form provide positive seating and extended life, especially designed for high pressure applications. Two-piece connecting rods are a special alloy aluminum-based material oversized for maximum strength and load disbursement. These Annovi Reverberi pressure washer pumps are designed for gearbox flex coupled or belt drive systems with a 24mm solid crankshaft. Flows: 3.96 to 5.8 GPM Pressure to: 7250 PSI Speeds: 1450 rpm Shaft Styles: Solid Shaft 24mm.
Click Here for the Annovi Reverberi SHP Series Pressure Washer Pump Part Breakdown.
| SHP15.50N Annovi reverberi |
 |
SHP22.50N Annovi reverberi |
List Price: $2,853.82
Our Price: $1,763.81
You save $1,090.01!  |
  |
|
List Price: $2,853.82
Our Price: $1,763.81
You save $1,090.01! |
|
|
 |
|
SHP15.50N AR (Annovi Reverberi) Pump 3.96 GPM @ 7250 PSI
Annovi Reverberi / AR North America SHP15.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F. |
SHP22.50N AR (Annovi Reverberi) Pump 5.8 GPM @ 7250 PSI
Annovi Reverberi / AR North America SHP22.50N Triplex Plunger Pump. The SHP Series delivers up to7,250 PSI. Spinning at 1,450 RPM, this 24mm sold shafted pump series features a new high efficiency manifold design (patent pending). Inlet thread is 1/2” F, and discharge thread is 3/8”F. |
Permanent link to this article: https://etscompany.com/wordpress/2011/08/29/shp-series-pumps-from-annovi-reverberi/
CAT 67DX39G1I Direct Drive Plunger Pump
This CAT Pump 67DX39G1I is a direct-drive triplex plunger pump, constructed of a brass manifold, 304SS stacked valve assemblies, solid ceramic plungers and standard NBR (Buna-N) o-rings, Lo-Pressure seals and V-packings. This high performance, economy pump is a flange-mount, hollow-shafted pump designed to bolt directly to a gas engine drive, providing an easy, compact installation. This pressure washer pump comes standard with an integral Regulating unloader and fixed chemical injector.
– Triplex plunger design provides a smooth liquid flow
– Special concentric, high-density, polished solid ceramic plungers provide a true wear surface and extended seal life.
– Built-in flange mount for easy, direct mounting to most gas engines. Eliminates the need for pulleys, belts, gearboxes.
– Integral Regulating Unloader with built-in by-pass is standard for safety and pressure setting.
– Stacked stainless steel valve design for long life and easy servicing.
– Fixed Chemical injector is standard and mounts directly onto Unloader to provide cleaning flexibility.
CAT Pump 67DX39G1I
This CAT Pump Features:
- Triplex plunger design provides a smooth liquid flow.
- Special concentric, high-density, polished, solid ceramic plungers provide a true wear surface and extended seal life.
- Built-in flange mount for easy, direct mounting to most gas engines. Eliminates the need for pulleys, belts, gearboxes.
- Integral Regulating Unloader with built-in by-pass is standard for safety and pressure setting.
- Stacked stainless steel valve design for long life and easy servicing.
- Fixed Chemical Injector is standard and mounts directly onto Unloader to provide cleaning flexibility.
CAT Pump 67DX39G1I Technical Specifications are:
- Flow ………………………………………………………. 3.9 gpm (14.8 l/m)
- Pressure Range…………………………….. 100 to 4000 psi (7 to 275 bar)
- RPM …………………………………………………… 3450 RPM (3450 RPM)
- Inlet Pressure Range…………………… Flooded to 75 psi (Flooded to 5 bar)
- Bore…………………………………………………………. 0.551 “ (14 mm)
- Stroke………………………………………………………. 0.405 “ (10.3 mm)
- Crankcase Capacity………………………………….. 13.5 oz. (0.4 l)
- Maximum Liquid Temperature ……………………… 140°F (60°C)
- Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
- Inlet Port (1)………………………………………….. 1/2” NPTF (1/2” NPTF)
- Discharge Port (1)………………………………….. 3/8” NPTF (3/8” NPTF)
- Discharge Port w/Chemical Injector (1)…….3/8” NPTM (3/8” NPTM)
- Inlet Auxiliary Port (1)……………………………… 1/4” NPTF (1/4” NPTF)
- Shaft Diameter (Hollow)……………………………………… 1” (25.4 mm)
- Weight………………………………………………………. 17 lbs. (7.7 kg)
- Dimensions………………………………11.50 x 8.82 x 7.99” (292 x 224 x 203 mm)
- Mounting Flange: SAE J609, Flange B, Extension 4 (1ӯ), Shaft Length =
- 3 1/4”, Pilot Ø = 5 3/4”, B.C. Ø = 6 1/2”, Thread = 3/8”-16 UNC TAP
CAT Pump Parts Breakdown for this CAT Pressure Washer Pump 67DX39G1I Click Here.
Permanent link to this article: https://etscompany.com/wordpress/2011/08/29/cat-pump-67dx39g1i-pressure-washer-pump/
| BE Water Pump WP-2070S |
|
BE Water Pump WP-3070S |
| Our Price: $278.00 |
|
|
| Our Price: $338.00 |
|
|
 |
 |
BE Water Pump 2″ – 7.0 – 158GPM:
Maximum Pressure of 158PSI
With a Aluminum Volute
Carbon Ceramic Mechanical Seal
With a Cast Iron Impelller
Total Head Lift of 82′
Suction Head Lift of 35′Blog for this BE Water Pump Click Here. |
BE Water Pump 3″ – 7 – 264GPM:
Maximum Pressure of 37PSI
With a Aluminum Volute
Carbon Ceramic Mechanical Seal
With a Cast Iron Impelller
Total Head Lift of 85′
Suction Head Lift of 26′ |
|
| BE Water Pump WP-2065CM |
|
|
| Our Price: $438.00 |
|
|
 |
BE Water Pump 2″ – 7 – 158GPM:
Maximum Pressure of 35PSI
With a Aluminum Volute
Carbon Ceramic Mechanical Seal
With a Cast Iron Impelller
Total Head Lift of 82′
Suction Head Lift of 26′ |
Permanent link to this article: https://etscompany.com/wordpress/2011/08/26/got-flooding-get-a-water-pump-to-remove-that-water-from-your-basement/
| PORTABLE GENERATOR MNBE-VI-3000 |
|
PORTABLE GENERATOR MNBE-VI-6500 |
Our Price: $1,000.00
Sale Price: $578.00
You save $422.00! |
|
|
List Price: $1,200.00
Our Price: $1,058.00
You save $142.00! |
|
|
 |
 |
| MNBE-VI-3000 PORTABLE GENERATOR |
Portable generator with 6500 watts max AC output, 5500 watts continuous AC output. |
|
| PORTABLE GENERATOR MNBE-VI-9000 |
|
|
Our Price: $1,530.00
Sale Price: $1,198.00
You save $332.00! |
|
|
 |
DC output of 12V and 8.3A
A reliable Electric Start Starting System
Three 120V 20A GFCI Duplex Receptacle and Two 120V Twistlock Receptacles 120V/240V
Fuel Tank Capacity of 25L and a max runtime of 6.5Hrs at full load
Noise level at 7m of 78db |
Permanent link to this article: https://etscompany.com/wordpress/2011/08/26/hurricane-warnings-get-your-portable-generator-now-3-to-choose-from-from-ets-co/
BE Water Pump WP-2070S
BE Water Pump
The BE Water Pump 2″ – 7.0 – 158GPM Features:
Maximum Pressure of 158PSI
With a Aluminum Volute
Carbon Ceramic Mechanical Seal
With a Cast Iron Impelller
Total Head Lift of 82′
Suction Head Lift of 35′
Permanent link to this article: https://etscompany.com/wordpress/2011/08/26/storms-coming-to-the-east-cost-be-ready-with-a-water-pump-from-ets-co/
PORTABLE GENERATOR BE VI 3000
This Portable Generator Features:
- 3100 Watts max AC output, 2800 watts continuous AC output
- 6.5 HP recoil Start PowerEase OHV gasoline engine 74 decibels with engine oil alert
- 120/240Volt
- Auto Voltage Regulator
- 4 Gallon fuel tank capacity
- Run time Approximately 11 hours @ 50% load
- Heavy-duty frame powder coated steel tubing
- Receptacles – (1) 120V duplex, (1) 240V twist lock receptacles
- (3) Circuit breakers (1)10 Amp (1) 20 Amp (1) 30 Amp
- CSA Approved Genpack
- Carb Approved
- 108 lbs.
Sale Price: $598.00 Click here to purchase this portable generator before your power goes out.
Permanent link to this article: https://etscompany.com/wordpress/2011/08/25/dont-be-left-in-the-dark-get-your-portable-generator-today/
CAT 66DX35G1I Pressure Washer Pump 3.5GPM 4000PSI 1″ GAS W/UNL.
List Price: $1,084.66
Our Price: $834.65 Click to order this CAT Pump.
Direct-Drive
Plunger Pump
Parts Breakdown for this CAT Pressure Washer Pump Click Here.
Repair Manual for the CAT 66DX35G1I Click Here.
The CAT Pressure Washer Pump 66DX35G1I Features are:
- Triplex plunger design provides a smooth liquid flow.
- Special concentric, high-density, polished, solid
- ceramic plungers provide a true wear surface and extended seal life.
- Compact flange mount permits easy, direct mounting
- to most gas engines. Modular Regulating Unloader with built-in by-pass is standard for safety and pressure setting.
- Fixed Chemical Injector is standard and mounts directly onto Unloader to provide cleaning flexibility.
This CAT 66DX35G1I Pressure Washer Pumps Specifications are:
- Flow ……………………………………………..3.5 GPM (13.2 L/M)
- Pressure Range ……………………100 to 4000 PSI (7 to 275 BAR)
- Stroke………………………………………………..0.394″ (10 mm)
Permanent link to this article: https://etscompany.com/wordpress/2011/08/25/cat-66dx35g1i-pressure-washer-pump/
Permanent link to this article: https://etscompany.com/wordpress/2011/08/24/annovi-reverberi-rs-series-pressure-washer-pumps/
CAT Stainless Steel Direct-Drive Plunger Pressure Washer Pump
Our Price: $1,179.00 Click to order the CAT 2SF10SEEL Pressure Washer Pump or
Call 1-877-824-7763 for a better price
CAT 2SF10SEEL Pressure Washer Pump FEATURES:
•Rugged 316SS design engineered for SWRO high duty cycles.
•High efficiency triplex design with unique spring loaded inlet valves and flow through plungers for smooth low pulsation flow.
•56C direct-drive 50/60 Hz motor satisfies international power requirements.
•Compact motor-pump units provide the smallest possible footprint for challenging spaces.
COMMON SPECIFICATIONS of the 2SF10SEEL CAT Pressure Washer Pump are:
Inlet Pressure Range……………….Flooded to 60 psi (Flooded to 4 bar)
Shaft Diameter…………………………………………..5/8” (15.9 mm)
RPM………………………………………………….1725 rpm (1725 rpm)
Bore………………………………………………………0.709” (18 mm)
Bore (2SF42SEEL Only)…………………………..0.787” (20 mm)
Maximum Liquid Temperature…………………..160°F (70°C)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
Crankcase Capacity………………………………12.0 oz. (0.36 l)
Inlet Port (1)………………………………………3/8” NPTF (3/8” NPTF)
Discharge Ports (2)…………………………….3/8” NPTF (3/8” NPTF)
By-Pass Return Port (1)……………………..1/4” NPTF (1/4” NPTF)
Weight (Pump Only)……………………………….8.9 lbs. (4 kg)
Dimensions (Pump Only)………………6.8 x 8.7 x 5.2” (173 x 221 x 133 mm)
Flow (60 Hz-1725 rpm)……………………………….1.0 gpm (3.8 l/m)
Flow (50 Hz-1450 rpm)……………………………..0.84 gpm (3.1l/m)
Discharge Pressure Range…………………..100-1200 psi (7-85 bar)
Stroke………………………………………………………..0.122” (3.1 mm)
CAT 2SF10SEEL Pump Breakdown pdf CLICK HERE.
2SF10SEEL CAT Pressure Washer Pump Repair Manual Click Here.
Permanent link to this article: https://etscompany.com/wordpress/2011/08/23/cat-pressure-washer-pump-2sf10seel/
Annovi Reverberi SXW Series Pressure Washer Pumps – Plunger Pumps are designed for high-pressure industrial washing applications. These Annovi Reverberi pressure washer pumps are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. These pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft. Flows: 3.96 to 7 GPM Pressure to: 5100 PSI Speeds: 1450, 1750 rpm Shaft Styles: Solid Shaft 24mm
Permanent link to this article: https://etscompany.com/wordpress/2011/08/22/annovi-reverberi-sxw-series-pumps/
