Jul 20 2011

GIANT PUMP GXRH 2224

GIANT PUMP GXRH 2224

Horizontal/Vertical Pump with built-in Regulator, Thermal Relief Valve and Siphon Injector.

Specifications

Model GXR Series

GXR2224………………………………………………………………………………….2.2 GPM @ 2400 PSI

Maximum Inlet Pressure……………………………………………………………..Up to 90 PSIG1

RPM…………………………………………………………………………………………3450

Plunger Diameter ……………………………………………………………………….16mm

Stroke GXR2224 ……………………………………………………………………….4.7mm (6.1 o angle)

Crankcase Oil Capacity ………………………………………………………………4.7 fl. oz. (4.1 fl.oz. horizontal)

Temperature of Pumped Fluids ……………………………………………………Up to 80 oF

Inlet Port …………………………………………………………………………………..1/2″ NPT

Discharge Ports ………………………………………………………………………….3/8″ NPT

Shaft Rotation ……………………………………………………………………………Either Direction2

Weight………………………………………………………………………………………9 lbs.

Width ……………………………………………………………………………………….8.325″

Height ………………………………………………………………………………………6.45″

Swash Plate Bore (Horizontal) …………………………………………………….3/4″ x 3/16″ Keyway

Swash Plate Bore (Vertical) …………………………………………………………7/8″ x 3/16″ Keyway

Valve Type ………………………………………………………………………………..Polyamide Plastic

1 A 25 PSIG minimum inlet pressure is required.

2 The pump itself can be driven in either direction of rotation; however, the cooling fan

on TEFC motors must always be positioned so that the cooling air is drawn from the

non-drive end of the motor towards the pump.

CLICK HERE FOR GXR PUMP BREAKDOWN

List Price: $260.00

Our Price: $200.07

You save $59.93!

CLICK HERE TO PURCHASE THE GXR GIANT PUMP

Permanent link to this article: https://etscompany.com/wordpress/2011/07/20/giant-pump-gxrh-2224/

Jul 20 2011

RMW2G24 AR (Annovi Reverberi) Pump

RMW2G24 AR (Annovi Reverberi) Pump

RMW2G24 Vertical Shaft AR (Annovi Reverberi) Replacement Pump!

Inlet & Outlet come out in the FRONT of the engine (spark plug end)

RMW2G24 Specifications for AR (Annovi Reverberi) Replacement Pump:

* 2400 PSI MAX

* 2.0 GPM

* 7/8″ Shaft

* Oil Lubricated

* Adjustable PSI

* Chemical Injector

* Thermal Relief Valve Included ! !

* Hose connection is 22mm x 14mm (will not fit 15mm pressure hoses)

* Pump Shaft Key included

NOTE:

Depending on your Pressure Washer model, you may need to get three new mounting bolts to mount theRMW2G24 AR (Annovi Reverberi) Pump to the engine.

Below are the most common bolt sizes needed to mount your new replacement pump to the engine:

– 5/16″ 18 x 2 1/2″ (Qty. 2)

– 5/16″ 18 x 3 1/2″ (Qty. 1)

Most pumps are only designed to last for approximately 50 hours of use. This RMW2G24 AR (Annovi Reverberi) Pump is designed to last for 300 + hours of use.

List Price: $243.26

Our Price: $156.74 RMW2G24 AR (Annovi Reverberi) Pump

You save $86.52!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/20/rmw2g24-ar-annovi-reverberi-pump/

Jul 20 2011

Direct-Drive Misting Plunger CAT Pumps

Direct-Drive Misting Plunger CAT Pumps

CAT Pump 2DX05ELS.MIST

CAT Pump 2DX15ES.MIST

CAT Pump 2DX20ES.MIST

CAT Pump 2DX27ES.MIST

CAT Pump 2DX30ES.MIST

CAT PUMP PDF Breakdown for Direct Drive Misting Plunger Pumps Click here.

Service Manual PDF for Direct Drive Misting Plunger CAT Pumps Click here.

FEATURES:

Triplex plunger design provides a smooth liquid flow.

Specially formulated Hi-Pressure Seals and concentrically

ground ceramic plungers assure maximum seal life.

Stacked Stainless steel valve design for long life and

easy servicing.

Ultimate compact, direct-drive unit for maximum portability.

Standard Integral Regulator with built-in by-pass

assures system pressure control and pump protection.

COMMON CAT PUMP SPECIFICATIONS

Inlet Pressure Range ………………………..Flooded to 60 PSI (Flooded to 4 Bar)

Bore ………………………………………………………………..0.630″ (16 mm)

Max. Liquid Temperature ……………………………………140°F (60°C)

Crankcase Capacity………………………………………….8.5 oz. (0.25 L)

Inlet Ports (1) ……………………………………………..3/8″ NPTF (3/8″ NPTF)

Discharge Port (1) ………………………………………3/8″ NPTM (3/8″ NPTM)

Shaft Diameter……………………………………………………..5/8″ (15.8 mm)

Weight ………………………………………………………….10.7 lbs. (4.9 kg)

Dimensions ……………………………………..7.75 x 7.12 x 6.29″ (197 x 180 x 160 mm)

NOTE: 3450 RPM models with 1725 RPM motor deliver half original flow.

SPECIFICATIONS

U.S. Metric U.S. Metric

Measure Measure Measure Measure
CAT Pump MODEL 2DX05ELS.MIST 2DX15ES.MIST

Flow …………………………. 0.5 GPM (1.89 L/M) 1.5 GPM (5.7 L/M)

Max. Discharge Pressure 2000 PSI (140 BAR) 2000 PSI (140 BAR)

Max. RPM…………………. 1725 RPM (1725 RPM) 3450 RPM (3450 RPM)

Stroke ………………………. 0.078″ (2.0 mm) 0.118″ (3.0 mm)
CAT Pump MODEL 2DX20ES.MIST 2DX27ES.MIST

Flow …………………………. 2.0 GPM (7.6 L/M) 2.7 GPM (10.2 L/M)

Max. Discharge Pressure 2000 PSI (140 BAR) 2000 PSI (140 BAR)

Max. RPM…………………. 3450 RPM (3450 RPM) 3450 RPM (3450 RPM)

Stroke ………………………. 0.157″ (4.0 mm) 0.220″ (5.6 mm)
CAT Pump MODEL 2DX30ES.MIST

Flow …………………………. 3.0 GPM (11.4 L/M)

Max. Discharge Pressure 1500 PSI (105 BAR)

Max. RPM…………………. 3450 RPM (3450 RPM)

Stroke ………………………. 0.244″ (6.2 mm)

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/20/direct-drive-misting-plunger-cat-pumps/

Jul 20 2011

General Pump MK – Series Industrial Pumps

General Pump MK – Series Industrial Pumps

Check out shopetsonline for all your industrial pump needs. Forget the big box stores like home depot and lowes for these high end pumps.

A purchase like this should be entrusted to a company that has been in the industrial cleaning supply business since 1970!

Click here for MK Series industrial pumps from shopetsonline.com

Click for the MK Series Industrial Pumps from General Pumps!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/20/general-pump-mk-series-industrial-pumps/

Jul 19 2011

General Pump, T Series 47 – TS1011

GENERAL PUMP,T SERIES 47 TS1011

  • The preferred pump frame in the cleaning industry
  • Forged brass manifold with an exdlusive lifetime warranty
  • Large capacity, die cast, anodized aluminum oil bath crankcase
  • Over sized connecting rods for maximum life
  • Heavy duty tapered roller bearing
  • Solid ceramic plungers with continuously lubricating packings
  • Unitized stainless steel inlet and discharge valves
  • Available in left handed “L” version
  • Triplex Plunger Pump
  • Maximum Volume: 4.0/4.75 GPM
  • Maximum Discharge Pressure: 2000/1500 PSI
  • Maximum Inlet Pressure: 125 PSI
  • Maximum Pump Speed: 1450/1750 RPM
  • Minimum Horsepower Requirements: 5.5 bhp (8.2 hp for gas engines)
  • Bore: .787″ (20mm)
  • Stroke: .472″ (12mm)
  • Crankcase Capacity: 33.8 oz. Nondetergent SAE 30W oil
  • Maximum Fluid Temperature: 165 degrees F.
  • Inlet Port thread: 1/2″ FPT
  • Discharge Port Thread: 3/8″ FPT
  • Shaft Diameter: .945″ (24mm)
  • Dimensions: 11.4″ x 9.2″ x 6.9″
  • Weight: 30 lb.
  • Lubrication: Fill the crankcase to the dot on the oil gauge window pe specifications with SAE 30W oil. Change the oil after a 40 hour break in period, then every three (3) months or 500 hour intervals thereafter.

Need parts for this pump? Click here for the datasheet.

List Price: $717.08

Our Price: $551.79

You save $165.29!

CLICK TO PURCHASE HERE…

 

Permanent link to this article: https://etscompany.com/wordpress/2011/07/19/general-pump-t-series-47-ts1011/

Jul 19 2011

Comet Pumps

The Comet HW and Comet HWS Series Pumps are a standard oem replacement pump for many popular pressure washer brands. Comet HWS series pumps come with standard twenty four millimeter solid shafts and can be belt or gear driven. Each pump has an optimal anodized aluminum crankcase for high speed operation.

  • Special high and low pressure seals with Buna V packing
  • Solid ceramic plungers
  • High quality ball bearings
  • Forged bronze connecting rods
  • Unloader valve is Pump Mounted on HW Series and Block Mounted on HWS Series
  • Belt Drive

Comet Pumps Breakdowns

Comet Pumps Repair pdf

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/19/comet-pumps/

Jul 19 2011

Giant Pumps P200

Giant P200 PUMPS

Series Triplex Plunger Pumps Order Here!

P200 Belt Drive P200 Electric Drive
BELT DRIVE
ELECTRIC DRIVE
P200 Gas Drive
GAS DRIVE

P200 Pump Assemblies

Model Max. GPM PSI Continuous PSI Intermittent Max. RPM Req’d BHP Fluid End
P205  0.5  2000 2500  1750  1.2 Brass
P206  0.8  2000 2500  1750  2.1 Brass
P205  0.9  2000 2500  3450  1.2 Brass
P208  1.0  2000 2500  1750  2.6 Brass
P230  1.1  2000 2500  1750  2.8 Brass
P209  1.5  2000 2500  1750  6.2 Brass
P206  1.5  2000 2500  3450  1.8 Brass
P223 1.7 2000 3000 1750 4.6 Brass
P210 1.8 2000 2500 1750 2.6 Brass
P217  1.8  2000 2500  1750  2.8 Brass
P208  1.9  2000 2500  3450  2.6 Brass
P230  2.0  2000 2500  3450  2.8 Brass
P221  2.3  2000 2500  1750 2.8 Brass
P209  2.7  2000 2500  3450  3.7 Brass
P223 3.0 2000 3000 3450 6.2 Brass
P217  3.3  2000 2500  3450  4.6 Brass
P210 3.3 2000 2500 3450 4.6 Brass
P218  3.4  2000 2500  1750  4.7 Brass
P219 4.2 2000 2500 1750 4.7 Brass
P221  4.2  2000  3450  5.8 Brass
P220  4.7  2000 2500  1750  6.5 Brass

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/19/giant-pumps-p200/

Jul 19 2011

General Pump – T Series 50, T991

T991 GENERAL PUMP,T SERIES 50

 

Features

  • Triplex Plunger Pump
  • Maximum Volume: 4.0/3.5 GPM
  • Maximum Discharge Pressure: 1100/1500 PSI
  • Maximum Inlet Pressure: 125 PSI
  • Maximum Pump Speed: 1750/1450 RPM
  • Minimum Horsepower Requirements: 3.6 bhp (multiply by 1.5 for gas engines)
  • Bore: .787″ (20mm)
  • Stroke: .394″ (10mm)
  • Crankcase Capacity: 15.2 oz. (nondetergent SAE 30W oil)
  • Maximum Fluid Temperature: 165 degrees F.
  • Inlet Port Thread: 1/2″ FPT
  • Discharge Port Thread: 3/8″ FPT
  • Shaft Diameter: .945″ (24mm)
  • Dimensions: 9.3″ x 8.3″ x 5.4″
  • Weight: 18.7 lb.
  • Forged brass manifold with an exclusive lifetime warranty
  • Die cast, anodized aluminum oil bath crankcase
  • Solid ceramic plungers with continuously lubricated packings
  • The original InterPump unitized stainless steel Kit 1 inlet and outlet valves
  • Standard 24mm soid shaft for pulley mounting
  • Flex coupling and bell housing available for direct drive
  • Ideal for all general cleaning/washing applications
  • Lubrication: Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 break-in period, then every 3 months or 500 hour intervals thereafter
  • The following statement is intended to assist our customers in understanding the terms of General Pump’s warranty, the circumstances under which they will honor claims, and the procedure for making such claims.
  • General Pump/US warrants each pump to be free of defects in material or workmanship for a period of five (5) years from the date of shipment. In addition, Gernal Pump/US warrants allforged brass pump manifolds to be free of defects in material and workmanship and from damage resulting from freezing for the life of the pump. Liability on this warranty is on all non-wear parts and limited to the repair or replacement of any pump returned to General Pump/US which upon inpsection is judged to be defective due to workmanship or material failure.
  • In the course of marketing or servicing the customer or potential customer’s needs, General Pump/US will use its best judgment in its recommendations. However, the ultimate responsibility for product application decisions shall rest with the customer. the sole and only warranty made by General Pump/US is the limited warranty described above. General Pump/US makes no other warranty or warranties of any kind, express or implied, including any implied warranty or merchantability or of any fitness for a particular use or purpose.General Pump/US disclaims and denies any liability for any direct, indirect, special, incidental or consequential damages which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight or other charges not expressly included herein. the only liability and the total liability of General Pump/US under this limited warranty or in any claim regarding or involving General Pump/US is expressly limited to the replacement of or purchase price of the product.
  • The following items are NOT warranted, due to matters beyond General Pump/US control.
  • Normal wear and tear to parts that are considered standard wear parts.
  • Defects caused by the fault or negligence of the buyer or third party.
  • Use of unauthorized repair parts, or;
  • modifications made by the customer.

List Price: $585.02

Our Price: $450.17

You save $134.85!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/19/general-pump-t-series-50-t991/

Jul 18 2011

HYPRO Car Wash Plunger Pump 2535s

HYPRO CAR WASH PLUNGER PUMP

The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by start-up and intermittent operation. Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.

  • 38GPM
  • 1200 Max PSI
  • 800 Max RPM
  • oil bath crankcase
  • ceramic plungers
  • 35mm OD solid shaft
  • 1 1/2″ NPT inlet port
  • 1″ NPT outlet port

List Price: $6,424.00

Our Price: $4,108.03

You save $2,315.97!

CLICK HERE TO PURCHASE

Permanent link to this article: https://etscompany.com/wordpress/2011/07/18/hypro-car-wash-plunger-pump-2535s/

Jul 18 2011

Tagaway Graffiti Remover – Removes Graffiti from School Crossing Sign

Tagaway Graffiti Remover – Removes Graffiti from School Crossing Sign

Video from Equipment Trade Service Company Inc. for the product Tagaway. Tagaway® Graffiti Removal Information Tagaway is a biodegradable liquid graffiti remover that is typically purchased in 32oz. trigger spray bottles. (Although also packaged in gallons and 5 gallon pails) You simply spray Tagaway onto the painted or smooth surfaces such as a painted wall, stop sign, locker or desk, then wiped off 10 to 15 seconds later with a dry cloth. If you wish to rinse the surface you just removed graffiti from, do so after you have removed the graffiti.. Tagaway is great for removing paint and graffiti from Smooth Surfaces like Lockers, Trash Bins, Street Signs, Commercial Vehicles, Painted Masonry, Aluminum Surfaces, Railroad Cars, Postal Boxes, Glass & Wood, Public Bathrooms and many other applications. Currently Tagaway is used by Public Works, Housing Authorities, Parks/Forest, Highway Authorities, Mass Transit Authorities, School Districts, Municipalities, Trucking Companies, Military Bases, Shopping Malls, U.S. Postal Office, and Vending Machine Companies both in the United States and Canada.

TAGAWAY 32oz. Graffiti Remover

TAGAWAY Graffiti Remover 1 GALLON

TAGAWAY Graffiti Remover 5 GAL.

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Permanent link to this article: https://etscompany.com/wordpress/2011/07/18/tagaway-graffiti-remover-removes-graffiti-from-school-crossing-sign/