Spotlight on the AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27.
AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27
SJW3G25D-F27 AR (Annovi Reverberi) Pump 3 GPM @ 2500 PSI, D Version 7/8″ Hollow Shaft
For parts just enter any part number on this breakdown in our search box for pricing and availability.
PARTS LIST: SJW 3400 rpm
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread = 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545 (click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.
This AR SJW3G25D-F27 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The SJW3G25D-F27 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27
The AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 has the following Specifications:
- Max GPM………………3
- Max LMP…………………………11.4
- Max PSI………………….2500
- Max Bar………………………….170
- Power EBHP……………5
- Bore Dia. mm…………………….15
- Stroke mm……………….6.8
- Weight Lbs………………………..11
- Max Temp……………….140°
- Oil Capacity………………………4.5oz
- Inlet Thread ……………1/2”M
- Discharge Thread……………….3/8”M
The AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 has the following Features
- Manifold of the SJW3G25D-F27:
- Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety.
- Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
- Bolts: Three bolts, 10mm, grade 8.8.
- Valves for the SJW3G25D-F27:
- Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Valve Caps on the SJW3G25D-F27: Machined brass for greater strength.
- Packing and Plungers:
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
- Low-Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- Support and Guides for this SJW3G25D-F27: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
- Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
- Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
- Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
- Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
- Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
- Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
- Oil Capacity: 4.5 oz.
- Dyno Proven: All SJW3G25D-F27 pumps are dyno tested to assure the theoretical design meets the actual design.
- Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
- Wet End Repair: Very simple no special tools required.
- Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
- Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
Is this AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 not the right Annovi Reverberi Pump? Click the link to see more Annovi Reverberi Pumps from Shopetsonline.com
List Price: $484.10
Our Price: $305.01 Click the link to order the SJW3G25D-F27
You save $179.09!
Availability:: available for order
Product Code: SJW3G25D-F27
Price subject to change. Price valid on this AR Annovi Reverberi Pressure Washer Pump SJW3G25D-F27 – 5/9/2012
Permanent link to this article: https://etscompany.com/wordpress/2012/05/09/ar-annovi-reverberi-pressure-washer-pump-sjw3g25d-f27/
Spotlight on the UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP.
UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP
The UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP Features:
- 1.6/3 GPM
- 220 PSI
- 1450 RPM
- WITH REGULATOR
- MAX TEMPERATURE 140 DEGREES F
- 2 DIAPHRAGMS, SEMI-HYDRAULIC
- MATERIALS – POLYPROPYLENE
- PUMPS SHAFT ROTATION – CW & CCW
- REPLACEMENT PUMP FOR 12V OR 110V MOTOR
IS the UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP not the right PUMP? Click the link to see all our UNICO Pumps at shopetsonline.com.
List Price: $574.11
Our Price: $539.70 Click the link to order the UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP
You save $34.41!
Availability:: available for order
Product Code: UNICO-6127001300
Price valid on the UNICO MC18 6127001300 MEDIUM PRESSURE 2 DIAPHRAGM PUMP 5/8/2012. Price subject to change.
Permanent link to this article: https://etscompany.com/wordpress/2012/05/08/unico-mc18-6127001300-medium-pressure-2-diaphragm-pump/
Spotlight on the Comet Pumps – 8108.2507.00 – UNLOADER PP560 – For Pressure Washers.
Comet Pumps - 8108.2507.00 - UNLOADER PP560
The Comet Pumps – 8108.2507.00 – UNLOADER PP560 – For Pressure Washers Features:
- 3200 PSI
- 8 G.P.M.
- 200°
- 3/8” M Inlet & Outlet
- 3/8” F Bypass
- Internal Spring Design
- Brass Valve Body
- Pressure Activated
The Comet Pumps – 8108.2507.00 – UNLOADER PP560 not the right Unloader for your Pressure Washer Pump? Click the link to see all our Unloaders for Pressure Washers from Shopetsonline.com.
List Price: $86.97
Our Price: $46.85 Click the link to order the Comet Pumps – 8108.2507.00 – UNLOADER PP560
You save $40.12!
Availability:: available for order
Product Code: 8108.2507.00
Price subject to change. Price valid on the Comet Pumps – 8108.2507.00 – UNLOADER PP560 – 5/7/2012
Permanent link to this article: https://etscompany.com/wordpress/2012/05/07/comet-pumps-8108-2507-00-unloader-pp560/
Spotlight on the CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump.
CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump
The CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump Features:
- Most widely used pump in the touch-less car wash industry
- Forged brass manifold with exclusive lifetime warranty
- High flow applications
- Dual manifolds utilizing a common crankcase for efficient performance
- Solid ceramic plungers with continuously lubricated packings
- Unitized stainless steel inlet and discharge valves
- Bronze connecting rods for maximum life
- Six Cylinder Car Wash Pump
CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump
The CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump has the following specifications:
- Maximum Volume: 41 GPM
- Maximum Discharge Pressure: 1500 PSI
- Maximum Inlet Pressure: 125 PSI
- Maximum Pump Speed: 1000 RPM
- Minimum Horsepower Requirements: 42 bhp (63.1 hp for gas engines)
- Bore: 1.417″ (36mm)
- Stroke: 1.102″ (28mm)
- Crankcase Capacity: 71 oz. Non detergent SAE 30W oil
- Maximum Fluid Temperature: 165 Degrees F.
- Inlet Port Thread: 1″ FPT
- Discharge Port Thread: 3/4″ FPT
- Shaft Diameter: 1.378″ (35mm)
- Dimensions: 22.1″ x 14.0″ x 9.7″
- Weight: 156.7 lb.
- Lubrication: fill crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Is the CW1541 General Pump Car Wash Series 77 Sixplex Plunger Pump not the right Car Wash Pump? Click the link to see more car wash pumps from ETS.
List Price: $7,891.86
Our Price: $6,072.79 Click the link to order the CW1541 Car Wash Pump.
You save $1,819.07!
Availability:: available for order
Product Code: BAPL-3109
Price subject to change. Price valid on the cw1541 Car wash pump 5/4/2012
Permanent link to this article: https://etscompany.com/wordpress/2012/05/04/cw1541-general-pump-car-wash-series-77-sixplex-plunger-pump/
Spotlight on the AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump).
AR Annovi Reverberi Pressure Washer Pump CWX18.10N
AR Annovi Reverberi Pressure Washer Pump CWX18.10N 4.75 GPM @ 1450 PSI, Car Wash Pump.
CWX18.10N Industrial triplex car wash pumps a perfect marriage with any vehicle wash system. Belt-driven or direct-drive pumps are specially designed for the purpose of Car Wash equipment and Car Wash supply. Specially designed seals, huge connecting rods, super thick ceramic plungers, premium bearings and forged brass manifold (with a lifetime warranty) insure the pump will give years of continuous, trouble free service. AR heavy-duty CWX18.10N car wash pumps provide low maintenance and allow service to be quick and affordable.
The AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump)Features:
- Manifold : High strength forged brass for long term use
- Bolts : Eight 10mm grade 8.8
- Plungers : Special thick solid ceramic for long life, strong durability and more resilient
- Crankcase : Precision die-cast, large cooling fins and anodized for the maximum heat dissipation. Bayonet style sight glass located in the rear and side cover, fill and side and bottom drain plugs
- Bearings : Over sized premium tapered roller bearing for maximum life and load disbursement
- Bearing Support : Precision die cast and machined to assure concentricity, alignment and strength
- Valves, Seats and Springs: Stainless steel with specially designed ultra form cages to provide long life and positive seating
- Seals and U-Packing : Continuously lubricating for extended life. Triple lip oil seal for assured crankcase seal
- Plunger Rods : High strength stainless steel, for heavy duty use
- Connecting Rods : Two piece special alloy aluminum based material, over sized for maximum strength, load disbursement, and long life. Heavy pin construction, for added load strength
The AR Annovi Reverberi Pressure Washer Pump CWX18.10N (Car Wash Pump) has the following specifications:
- Max GPM………………4.75
- Max LMP…………………………18
- Max PSI………………….1450
- Max Bar………………………….100
- Power EBHP……………5
- Bore Dia. mm…………………….20
- Stroke mm……………….16.6
- Weight Lbs………………………..32
- Max Temp……………….140°
- Oil Capacity………………………32oz
- Inlet Thread ……………3/4”F
- Discharge Thread……………….3/8”F
Items NOT INCLUDED with your Pressure Washer Pump CWX18.10N that you may need:
The PUMP GUARD will ‘dump’ any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER – if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
List Price: $1,350.00
Our Price: $905.86 Click the link to order the
Pressure Washer Pump CWX18.10N
You save $444.14!
Availability:: available for order
Product Code: CWX18.10N
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS Pressure Washer Pump CWX18.10N – 5/2/2012.
Permanent link to this article: https://etscompany.com/wordpress/2012/05/02/ar-annovi-reverberi-pressure-washer-pump-cwx18-10n/
$10.00 off your order of $100.00 or more
Spring into savings with ETS Co. and Shopetsonline.com
EVERY DAY IN MAY!
Spend $100.00 or MORE and use Coupon Code: SPRING
AND GET $10.00 Off your Entire Order!!
Permanent link to this article: https://etscompany.com/wordpress/2012/04/30/spring-into-savings-with-ets-co-and-shopetsonline-com/
Spotlight on the Annovi Reverberi Combiset Mounting Bolt Kit AR2126.
This repair kit for Annovi Reverberi is the bolt kit AR2126 needed for combiset repairs of AR Pumps.
Annovi Reverberi Combiset Mounting Bolt Kit AR 2126
The Annovi Reverberi Combiset Mounting Bolt Kit AR2126 Features:
- (1) Washer 1260570 #18
- (2) O-Ring 390080 #19
- (1) Brass Bolt 1540270 #20
- (1) Washer 1260560 #26
- (1) O-Ring 880270 #27
- (1) Brass Bolt 1540260 #28
Is the AR2126 annovi reverberi kit not the right repair kit for your AR Pump? Click the link to see all our repair kits for your Annovi Reverberi Pressure Washer Pumps.
List Price: $23.70
Our Price: $14.59 Click the link to order the AR2126 Mounting Bolt Repair Kit from AR Pumps.
You save $9.11!
Availability:: available for order
Product Code: AR2126
Price subject to change. Price valid on this AR2126 Mounting Bolt Repair Kit from Annovi Reverberi 4/27/2012.
Permanent link to this article: https://etscompany.com/wordpress/2012/04/27/annovi-reverberi-combiset-mounting-bolt-kit-ar2126/
Spotlight on the GIANT PUMPS – GXRH2224-111 – Triplex Plunger Pump.
GIANT PUMPS - GXRH2224-111 - Triplex Plunger Pump
GIANT PUMPS – GXRH2224-111, GXRH PUMP,2.2GPM@2400PSI@3450RPM
The GXRH2224-111 Features
- GXRH2224-111– 2.2 GPM @ 2400 PSI
- Maximum Inlet Pressure -Up to 90 PSIG1
- RPM – 3450
- Plunger Diameter – 16mm
- Stroke GXRH2224-111 – 4.7mm (6.1 o angle)
- Crankcase Oil Capacity – 4.7 fl. oz. (4.1 fl.oz. horizontal)
- Temperature of Pumped Fluids – Up to 80 oF
- Inlet Port – 1/2″ NPT
- Discharge Ports – 3/8″ NPT
- Shaft Rotation – Either Direction2
- Weight – 9 lbs.
- Width – 8.325″
- Height – 6.45″
- Swash Plate Bore (Horizontal) – 3/4″ x 3/16″ Keyway
- Swash Plate Bore (Vertical) – 7/8″ x 3/16″ Keyway
- Valve Type – Polyamide Plastic
- 1 A 25 PSIG minimum inlet pressure is required.
- 2 The pump itself can be driven in either direction of rotation; however, the cooling fan
- on TEFC motors must always be positioned so that the cooling air is drawn from the
- non-drive end of the motor towards the pump.
GIANT PUMPS - GXRH2224-111 - Triplex Plunger Pump
Is this GXRH2224-111 – Triplex Plunger Pump not the right pump? Click the link to see all our Pressure Washer Pumps from GIANT PUMPS.
List Price: $270.00
Our Price: $207.77 Click the link to order this GXRH2224-111 Giant Pump.
You save $62.23!
Availability:: available for order
Product Code: GIANT-GXRH2224-111
Price subject to change. Price valid on this GXRH2224-111 pressure washer Giant Pump 4/25/2012
Permanent link to this article: https://etscompany.com/wordpress/2012/04/25/giant-pumps-gxrh2224-111-triplex-plunger-pump/
Spotlight on the AL607 VRT Unloader for Pressure Washers.
AL607 VRT Unloader for Pressure Washers
AL607 VRT Unloader has a Forged brass body Stainless internals Up to 4350 PSI 200F 7.8 GPM 3/8″ in-out/bypass.
AL607 VRT Unloader Features:
- Forged brass body
- Stainless internals
- 4350 PSI
- 200 deg. F
- 7.8 GPM
- 3/8″ in-out/bypass
This not the right unloader for your pressure washer? Click the link to see all our pressure washer unloaders.
List Price: $59.98
Our Price: $46.16 Click the link to order the AL607 VRT Unloader.
You save $13.82!
Availability:: available for order
Product Code: AL607
PRICE SUBJECT TO CHANGE. PRICE VALID ON THIS AL607 VRT UNLOADER 4/23/2012
Permanent link to this article: https://etscompany.com/wordpress/2012/04/23/al607-vrt-unloader/
Spotlight on the CAT Pump 3560 – 35 Frame Plunger Pump.
CAT Pump 3560 - 35 Frame Plunger Pump
CAT Pump 3560 – 35 Frame Plunger Pump, DS, w/Side Gauge, 20/4000, 1160 RPM or 25/3000, 1450 RPM, SS/SS-Valves.
• The CAT Pump 3560 has a Triplex design that delivers high efficiency and low pulsation.
• Durable dual V-Packings are lubricated and cooled by pumped liquid.
• Pre-set Lo-Pressure Seals on the CAT Pump 3560 provide secondary protection against external leaks and require no packing adjustment.
• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
• Specially formulated Seals and V-Packings on this CAT Pump 3560 offer unmatched performance and extended life.
• Wet-end easily serviced without entering crankcase.
CAT Pump 3560 - 35 Frame Plunger Pump
CAT Pump 3560 – 35 Frame Plunger Pump Features:
- Flow*…………………………………………………………….20 gpm (76 l/m)
- Pressure Range*…………………………….100 to 4000 psi (7 to 275 bar)
- Inlet Pressure Range…………………..Flooded to 70 psi (Flooded to 4.9 bar)
- RPM…………………………………………………………..1160 rpm (1160 rpm)
- Bore……………………………………………………………….. 0.984” (25 mm)
- Stroke………………………………………………………………1.890” (48 mm)
- Crankcase Capacity……………………………………..4.2 Qts. (4 L)
- Maximum Liquid Temperature …………………..160°F (71°C)
- Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
- Inlet Ports (2)………………………………………..1-1/2” NPTF (1-1/2” NPTF)
- Discharge Ports (2)……………………………………..1” NPTF (1” NPTF)
- Pulley Mounting……………………………………Either Side (Either Side)
- Shaft Diameter…………………………………………….. 1.378” (35 mm)
- Weight………………………………………………………….142 lbs. (64.4 kg)
- Dimensions…………………………..23.54 x 18.11 x 9.88” (598 x 460 x 251 mm)
- *Contact Cat Pumps for continuous duty applications.
This not the right CAT Plunger Pump? Click the link to see all our CAT Pumps from ETS Company.
| CAT Pump 3560 |
 Data Sheet |
 Service Maual |
Our Price: $8,585.00 Click the link to order this CAT Pump 3560 Pressure Washer Pump.
Call 1-877-824-7763 for a Better Price we can’t post online!!
Availability:: Available for Order
Product Code: 3560
PRICE SUBJECT TO CHANGE. PRICE VALID ON THE CAT PUMP 3560 PRESSURE PUMP 4/20/2012
Permanent link to this article: https://etscompany.com/wordpress/2012/04/20/cat-pump-3560-35-frame-plunger-pump/
