AR1265890 is the Inlet by-pass adapter made by Annovi Reverberi and AR North America for most of it’s pumps. It can also be written or seen as AR 1265890.
This AR1265890 adapter is made of solid black plastic and is a durable and cheap replacement if your pressure washer pump has stopped working. It’s one of the first things you should check as it can fail easily, but is also easily replaced.
Not sure if this item is the correct fix for your Annovi Reverberi pump? Feel free to give us a quick call and we will help you determine if the AR1265890 By-Pass Adapter will work on your machine. Call 1-877-824-7763
You can also find your pumps breakdown / repair manual here and determine yourself if this is the right repair part for your needs.
If your sure this is the correct inlet adapter for your pressure washers pump then you can order it directly and securly on our eCommerce site by clicking here: AR1265890
Permanent link to this article: https://etscompany.com/wordpress/2017/09/07/annovi-reverberi-ar1265890-inlet-pass-adapter/
This blog is for the piston repair kit AR2544 also known as AR 2544 from Annovi Reverberi. This kit is used to repair the pistons on the XM, XMV and XMA series of pumps from AR North America.
This AR2544 or AR 2544 is one of the first items you can look at to repair your pump for your pressure washer should it stop pumping. And fixing these will get you back up and running fast.
AR2544 / AR 2544 Piston Repair Kit.
This AR2544 / AR 2544 Piston Repair Kit contains the following items:
- 3 of part number AR480480 which is the O-Ring that measures 14 x 1.78
- 3 of part number AR1260091 which is a Washer / Slinger made of Brass
- 3 of part number AR1780070 the Plunger made for solid Ceramic
- 3 of part number AR1260100 which is the Piston Washer
- 3 of part number AR1260110 which is the Nut that measures an M8
Need help determining if the AR2544 / AR 2544 Piston Repair Kit is the correct item for your pump? Click here to find your pumps breakdown / repair manual to see if this is the exact part number you need.
If you have found your pumps repair manual and are still not sure if the AR2544 / AR 2544 kit is correct for you, please give us a call and we will be happy to help you determine the correct pistons for your pump on your pressure washer. Call 1-877-824-7763
Ready to order the Piston Repair Kit? Click here to order securely on our eCommerce site.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/06/annovi-reverberi-kit-ar2544-piston-set-kit/
The RK15.28HN is a replacement pump made by Annovi Reverberi or AR Pumps for pressure washers that require a flow rate of 3.96 gallons per minute and a maximum pressure rating of 4000 PSI.
This RK15.28HN pump spins at 1450 RPM and is made to mount on units that require a 24mm shaft. The unit is made to work with gearbox , belt drive, coupling drive systems, electric motor 182-184 frame driven systems, and even gasoline engine driven systems.
RK15.28HN replacement Pressure Pump from Annovi Reverberi
Replacement pump RK15.28HN has the following specifications:
- The maximum flow volume of the pump is 4.0 GPM
- This unit has a maximum pressure rating of 4,000 PSI
- RK15.28HN has a maximum Pump Speed of 1450 RPM
- The Brake Horespower of this unit is 11.0
- A Shaft Size diameter of 24mm is standard for this pump
- The RK15.28HN Weights 20 lbs.
This RK15.28HN unit has the features standard:
- The Manifold is made of High strength forged brass for long term use
- Pump Bolts are Eight 8mm grade 8.8
- Plungers of this unit are made of special thick ceramic for long life, strong durability, and more resilience
- The Crankcase is made from Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs
- This pump has Bearings that are Oversized tapered roller bearing for maximum life and load disbursement
- The Bearing Support are also of Precision die cast and machined to assure concentricity and alignment
- Valves, Seats, and Springs on the RK15.28HN are made from Stainless steel with specially designed Ultra Form cages to provide long life and positive seating
- Seals and V-packing of the pump are Continuously lubricating for extended life
- The Plunger Rods are made from Stainless steel construction for strength, no plating to scrape off, back up and oring plunger sealing system
- Connecting Rods on the RK15.28HN are all One piece special alloy aluminum for higher pressure, oversized for maximum strength, load disbursement, and long life
If you are not sure if the RK15.28HN pump is the correct replacement for your pressure washer, you can give us a call anytime and one of our specialists will be glad to assist you in determining if this is the correct pump or if another unit might be more beneficial to your pressure washer. Call 1-877-824-7763
If you already own a RK15.28HN and want to try your hand at repairing it, we have you covered there too! Just click here to go to the parts breakdown / repair manual to determine what kits and parts you might need to fix your pump. If you are not sure if this is your actual pump we have almost all Annovi Reverberi Pump Breakdown / Repair Manuals here.
Ready to order the RK15.28HN, just click here to shop securely on our eCommerce store.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/05/rk15-28hn-replacement-pump-annovi-reverberi/
This is information for the Comet Pump 6305.1800.00 PUMP also called the ZWD 4035 G. This pump is for pressure washers that have a flow rate of 4.0 GPM and a maximum pressure of 3500 PSI. This unit is for machines that spin at 3400 RPM.
The 6305.1800.00 PUMP also called the ZWD 4035 G is a replacement pressure washer pump that mounts to a gas engine and has a reversible crankshaft that allows it to be connected to either a right or left hand mounting system.
6305.1800.00 PUMP also called the ZWD 4035 G
6305.1800.00 PUMP also called the ZWD 4035 G has the following specifications:
- The zwd 4035 G has a Maximum Volume of 4.0 gpm
- This pump has a Max. Discharge Pressure of 3500 psi
- 6305.1800.00 also has a Maximum Pump Speed 3400 rpm
- The Inlet Port Thread of this pump is 1/2 FPT
- This unit has a Discharge Port Thread of 3/8 FPT
- The zwd 4035 G has a Shaft Diameter of 1″ and is Hollow
- Pistons on the 6305.1800.00 are 15mm
- Weight of this unit is 16.5 lbs.
Some other features of the 6305.1800.00 PUMP also called the ZWD 4035 G are that the unit has:
- 1/2 FPT Inlet — 3/8 FPT Discharge
- Anodized, Die-Cast Aluminum Crankcase
- Solid Ceramic Plungers
- Stainless Steel Check Valves
- Buna-Textile V-Packings
If your pressure washers pump has stopped working and you need a new one with the above specifications this 6305.1800.00 PUMP also called the ZWD 4035 G is a very good and reliable pump to purchase. If you are not sure if this unit is correct or will work on your machine, give us a call and we will be happy to help you figure out the best item to get you back up and pressure washing fast. Call 1-877-824-7763
Do you already own a 6305.1800.00 PUMP also called the ZWD 4035 G? And need to repair it? Just click here to get the breakdown / repair manual for your unit.
Want to order this unit just click here and you can order it securely on our e-commerce site.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/01/comet-pumps-6305-1800-00-pump-also-called-zwd-4035-g/
The 7560C is a replacement pump from Hypro in their CI series of pumps. This unit is built to replace any pump that requires a 22.5 gpm flow rate with a maximum pressure rating of 300PSI.
This 7560C is primarily used in the agricultural area of sprayers. It’s built to with stand the harsh chemicals and pesticides that it pumps on to crops through industrial sprayers. This unit is also perfectly designed to handle other items from fertilizers to aromatic solvents.
Hypro Pumps – 7560C
The technical specifications of the 7560C roller pump are:
- Unit has a Max flow of: 22.5 gpm
- This pump is designed with a Max pressure of: 300 psi
- The Max speed this pump can spin at is: 1000 rpm
- 7560C has port sizes of: 3/4″ NPT
- Pumps shaft rotation is counter clockwise.
- 15/16″ solid stainless steel shaft is how this pump mounts to it’s sprayer.
Does your sprayers pump look like this, but is missing it’s identification? Don’t worry! You can either look for your pump on our breakdown / repair manuals by clicking here or just give us a call and our Hypro Pump / Sprayer Techs will be able to help you figure out what unit you need to get back up and spraying. Call 1-877-824-7763
Already own this Series of Roller pump and want to try to fix it before buying a new one? Click here to get the specific parts breakdown / repair manual for this unit.
Permanent link to this article: https://etscompany.com/wordpress/2017/08/31/hypro-pumps-7560c-roller-pump-series/
Part number 52040009 is a ceramic plunger repair part from General Pumps. While it is called a kit, it is basically 1 plunger, and you will need to order 1 kit for every plunger your pressure washer pump has damaged.
The 5204009 is used on many different general pump units. That include, but is not limited to the following pumps: EZ2545E, EZ3030G34, EZ3035G, EZ3040G, EZ3040S, EZ3045G, TT9351, TT9441, TX1508G8, TX1510G8, TX1510S34. It may also be used on many more, to see if it is used on your unit find your breakdown / repair manual here.
General Pump Kit – 52040009 Ceramic Plunger
If after looking up your pump above on our breakdown / repair manual page for General Pumps you can still not determine if the 52040009 Ceramic Plunger kit is the correct plunger for your pressure washer pump, please give us a call and our General Pump Specialist will be able to assist you in getting the correct part to get you up and running fast. Call 1-877-824-7763
Need more than plungers for your General Pump? We have you covered there too. Any part you find that needs to be repaired, we can get for you. Just find the part number on your pumps breakdown / repair manual and put it in the search bar on our e-commerce page and add it to your cart along with the correct number of 52040009 plungers you need by clicking here. The search bar will be in the upper left hand corner of the page. Repairing your pump almost always is cheaper than getting a brand new one, especially when it comes to General Pumps.
Save
Permanent link to this article: https://etscompany.com/wordpress/2017/08/30/general-pump-kit-52040009-ceramic-plunger/
The Annovi Reverberi AR20821 Mini-Matic Bolt On Unloader is made for AR North American pump series RC, XM and the XT. Not sure which pump your pressure washer is using click here to find your pumps part breakdown / repair manual.
This AR20821 bolt on style unloader is rated for pumps and pressure washers that have a maximum pressure rating of 2600 PSI, and is a vital part to protecting your pump and machine against building up too much pressure when your gun is not pumping water.
AR20821 Bolt On Unloader
The technical specifications for this AR20821 Bolt On Unloader are:
- For AR pump series RC, XM and XT
- Flow: 2 to 5 GPM
- Maximum pressure: 2600 PSI
- Maximum temperature: 140F
- Inlet: 1/2″ FPT
- Outlet: 3/8″ MPT
We all know we need working unloaders on our pumps, and this is a very commonly replaced item on our pressure washers. Not sure if this AR20821 is the correct unloader for your unit, give us a call and one of our AR pump specialists will help you determine the correct item for you. Call 1-877-824-7763
If you already own a non working AR20821 and want to try to fix it before replacing it, you can find it’s repair part breakdown / manual by clicking here.
To be honest, these parts are so economical and are just easier to replace, your best bet is just to quickly order a new one. When you get it, you unbolt your old one and then bolt on the new one and get back to doing what you need to do, make money pressure cleaning.
Click here to order your AR20821 unloader today.
Permanent link to this article: https://etscompany.com/wordpress/2017/08/29/annovi-reverberi-ar20821-mini-matic-bolt-unloader/
This blog is for the RMW22G24-PKG, from Annovi Reverberi. It’s a pump package built to be your replacement unit for your pressure washer that needs to have a flow rate of 2 gallons per minute with a maximum PSI of 2400. This pump runs at 3400 RPM, which is the industry standard.
The RMW22G24-PKG was put together by Annovi Reveberi, so home owners and contractors alike could fix their pressure washers quickly and easily with out having to order a bunch of separate parts. This pump package has everything you need in it to replace your units pump and get back up and running fast.
RMW22G24-PKG pump package from Annovi Reverberi
RMW22G24-PKG has the following specifications:
- Max GPM 2
- Max PSI 2400
- RPM 3400
- Shaft Size 7/8″
- Pump RMW22G24-EZ
- Flange Vertical Gas Engine Flange
- Thermal Relief Valve TPP140-1/4A
- Detergent Tube w/Filter AR1269120
- Applications EZ Start Valve
If you are not sure if the RMW22G24-PKG is the correct kit for your pressure washer, you can give us a call Monday – Friday EST 7:30 am until 4:00 pm and one of our Annovi Reverberi pump specialists will be glad to assist you with any questions you may have. Call 1-877-824-7763
On the contrary, if you already own a RMW22G24-PKG and need to repair it we have you covered there too. You can find your units parts breakdown / repair manual here and get all the repair parts you may need to save you time and money of replacing the entire pump. Not sure if you have and RMW pump? Click here to see all out breakdowns for AR pumps and find the one you need.
This kit comes with the following Annovi Reveberi items:
- RMW22G24D (also know as RMW2.2G24D) – Pump
- TPP140-1/4A – Thermal Relief Valve
- AR1269120 – Detergent Tube with Filter
Ready to order? Just give this link a click and you can order the pump securely on our e-commerce site. RMW22G24-PKG
Save
Permanent link to this article: https://etscompany.com/wordpress/2017/08/28/annovi-reverberi-rmw22g24-pkg-replacement-pump-package/
The LANDA Pump with a part number of 8.921-713.0 is a replacement unit for LANDA Pressure washers that use a pump with a flow rate of 6 gallons per minute and a maximum output pressure of 3600 PSI. The unit spins at the industry standard of 1450 RPM.
This 8.921-713.0 pump is an original OEM unit made specifically for their pressure washers, and is the first choice when your machine stops building pressure to pump.
8.921-713.0 pump
Some technical specifications on this 8.921-713.0 pump are:
- The unit has a flow rate of 6 GPM.
- This pump has a maximum PSI of 3600.
- The rpm of this unit is 1450.
A few more details about the 8.921-713.0 are:
- Landa’s unique design that delivers the same performance as other pumps but at 10% lower RPM.
- 10% lower RPM than comparable pumps
- Durable ceramic plunger with mirror finish
- Unique snug-fit design for heavy-duty valves
- Stronger crankcase with cooling fins and thicker mounting feet
- Extra-large European made tapered roller bearings for longer life
- Larger oil level sight glass
- Specially die cast connecting rods for quieter operation and longer pump life
- U-seals which allow for up to 185°F inlet water for hot water cleaning, significantly reduce pump maintenance and extend pump life
- Tighter piston rod tolerance for reducing wear and maximizing performance
- Multi-viscosity pump oil for better lubrication and cooler operation
- New and improved check valves for quieter operation and longer valve life
As always, if you’re not sure if this is the correct unit for your machine, you can give us a call and we will be happy to assist you in figuring out if this is the correct item to get you up and running fast. Call 1-877-824-7763
You can also check your pressure washers manual here to determine if the pump is the one needed for your pressure washer by finding the breakdown / repair manual of your unit here.
If you are sure this is the correct pump you can order it fast and easily by clicking here: 8.921-713.0
Permanent link to this article: https://etscompany.com/wordpress/2017/08/25/landa-pump-8-921-713-0-rated-6-gpm-3600-psi/
The XTV2G15EBA-F8 is a replacement pump from Annovi Reverberi for your pressure washer that requires as flow rate of 2.11 gallons per minute with a maximum pressure of 1500 PSI. This unit has an RPM of 3400 and is made to mount on pressure washers with a 5/8″ standard type shaft.
Our XTV2G15EBA-F8 pump has a head forged from solid brass and has a body made from die-cast metals, making it a durable and dependable replacement for your current pressure washer.
XTV2G15EBA-F8 Pump
Some technical specification of the XTV2G15EBA-F8 Pump are:
- Max GPM – 2.11
- Max LMP – 8
- Max PSI – 1500
- Max Bar – 103
- Power EBHP – 2
- Bore Dia. mm – 15
- Stroke mm – 4.8
- Weight Lbs – 10
- Max Temp – 140°
- Oil Capacity – 8oz
- Inlet Thread – 1/2”F
- Discharge Thread – 3/8”F
After reading all of the above, if you are not sure if this is the correct pump for your machine you can give us a call toll free and our Annovi Reverberi Pump specialists will be happy to assist you in determining if the XTV2G15EBA-F8 is right for you. Call 1-877-824-7763
Already own a XTV2G15EBA-F8 for your pressure washer and it has stopped working? Try fixing it yourself first with repair kits and parts. To find all the parts and kits available for fixing this pump you can click here. Not sure if this is your actual pump, then click here to find out which pump you have and view it’s breakdown / repair manual.
If you are sure this unit will get you up and running then you can order it securely on our site by clicking here.
Permanent link to this article: https://etscompany.com/wordpress/2017/08/24/xtv2g15eba-f8-pump-annovi-reverberi-pressure-washer/
