RMW2.5G28-EZ-SX pump from Annovi Reverberi is a vertical style pump that mounts the back of your pressure washer. This pump is rated 2.5 gallons per minute and has a maximum PSI of 2800. This unit can also be written as RMW25G28-EZ-SX.
The RMW2.5G28-EZ-SX pump from Annovi Reverberi spins at 3400 RPM and is one of the more commonly used pumps on your home improvement or big box store bought pressure washer. Don’t by a whole new unit from Home Depot or Lowes, repair the one you bought with this great little pump.
RMW2.5G28-EZ-SX pump from Annovi Reverberi
Please be aware that this RMW2.5G28-EZ-SX pump from Annovi Reverberi is rotated 180 degrees, for mounting under your pressure washer. Please see your units repair manual to determine if this is the correct mounting for your machine.
The RMW2.5G28-EZ-SX pump from Annovi Reverberi has the the following specifications:\
- The unit is a Vertical Mount with Gas Flange 3-7 HP
- Max. Volume on this pump is 2.5 GPM
- Max. Discharge Pressure of this unit is 2,800 PSI
- Max. Pump Speed on the RMW SX is 3,400 RPM
- Shaft Diameter for mounting measures 7/8” Hollow
- Built In unloader and chemical injector come standard on this pump
- Built In easy start valve is also standard on this unit.
- Maximum Horsepower Requirements to work this pump is 6.5 GHP
- Inlet Port on the unit measures 3/4″ FGH (garden hose)
- Outlet Port has a measurement of 22mm (Twist Connect)
- Brass manifold for long life.
- Stainless steel plungers built to make this pump last.
- Pump comes filled with oil for quick step up and use.
- Note: Engine shafts longer that 2” will require spacers or washers found at your local hardware store.
- Weight of the SX pump is 7.7lb.
The RMW2.5G28-EZ-SX pump from Annovi Reverberi is not recommended to be repaired, as they are easier to replace both in time and money, however if you want to try your hand at DIYing it you can find the pump repair manual and breakdown by clicking here. Having trouble trying to figure out if this is the right unit for your big box store bought pressure washer from Home Depot of Lowes? Give us a call and we will help you determine the correct replacement pump for your machine. Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to order? Place your order on our eCommerce store by clicking here.
As a bonus this pump does qualify for our everyday 5% off sale. Just use the coupon code “5off” at check out to get 5% off your total order over $50.00
Permanent link to this article: https://etscompany.com/wordpress/2017/10/03/rmw2-5g28-ez-sx-pump-annovi-reverberi/
The M407 Trigger Gun is a 7 gallon per minute at 4000 PSI spray attachment for your pressure washer. Without a quality trigger gun your pressure washer is all but useless.
M407 TRIGGER GUN is one of the more versatile items on the market today, made with long lasting parts to give your pressure washer years of use. It’s made from very durable plastic and metal parts and has the best internal pieces that are time tested and trusted by the pressure washing community.
Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI
The features of this Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI:
- Maximum flow of this gun is 7 GPM
- Maximum pressure on this unit is 4000 PSI
- Maximum temperature that this gun can spray out is 250F.
- Inlet port measures 3/8″ FPT
- Outlet port has a measurement of 1/4″ FPT
Really not sure what type of gun you need for your pressure washer? Or not sure if this rear entry spray gun will do the trick for you? Give us a call toll free and we will be glad to assist you in picking out the right accessories for your pressure washing needs. Call 1-877-824-7763 {Smart Phones Click to Call}
Or find your pressure washer parts breakdown here and see what the manufacturer recommend.
Purchase two of them, and not only do you have a back up, but then your purchase also qualifies for our everyday 5% off sale. Just add the coupon code 5off to the coupon field at check out to get it.
Permanent link to this article: https://etscompany.com/wordpress/2017/10/02/pressure-washer-m407-trigger-gun-7gpm-4000psi/
The 3324-2000.85 is a .85 spray nozzle from Hypro Pumps for use with many pressure washers on the market today.
This 3324-2000.85 nozzle, sometimes referred to as a gun in the pressure washer industry is made from durable material and is easy to set up and use, giving you hours of up time for you and your pressure washer.
3324-2000.85 Spray Nozzle
The 3324-2000.85 Spray Nozzle has the following specifications:
- Max. pressure: 3000 psi
- Max. temp: 300˚F
- 1/4” (F) NPT inlet
- Variable fan pattern, 0˚ to 80˚ fan
- Push/pull for pressure adjustment to draw soap
- Twist for fan adjustment
Not sure if this 3324-2000.85 Spray Nozzle is the correct unit for your machine? Give us a call toll free and we will be glad to help you figure out the correct nozzle for any pressure washing or spraying need you may have. Call 1-877-824-7763 {Smart Phones Click to Call}
Need help finding other repair parts or kits for your Hypro Pump? Click here and find your pumps repair / breakdown manual to determine the right fix or accessory to get you back to pressure washing.
As always if your order is over $50.00 you can get our everyday sale of 5% off by adding the code “5off” in the coupon field before checking out.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/29/3324-2000-85-hypro-pumps-spray-nozzle-85/
This blog is for a CAT Pumps – 8210 flex coupler assembly kit. It has everything you need in it to reduce the space requirements needed for belt driven or gearbox assemblies.
The CAT Pumps – 8210 was designed by CAT to work with 145 TC motors with horse powers up to 3. This assembly also eliminates the need for belt selection, sizing and adjusting to work properly.
CAT Pumps – 8210 – Coupler Assembly
CAT Pumps – 8210 – Coupler Assembly has the following specs:
- Can adjust from 16.5 mm to 7/8″
- The kits compact direct mounting feature reduces space required for belts or gearbox drive assemblies
- This item insulates against heat transfer
- Special urethane flexible spyder designed for extended life with high temperature and high RPM
Not sure if this coupler assembly is the correct reducing kit for your CAT Pump? Give us a call toll free and a CAT Pump specialist will be happy to assist you with your unit. We are here from 7:30 am to 4:00 pm M-F EST. Call 1-877-824-7763 {Smart Phones Click to Call}
Want to try to determine yourself if this is the correct repair kit? Find your CAT Pump on our breakdown / repair manual page here.
We may be able to get this unit to you at a better price! Call us before you order! Call 1-877-824-7763 {Smart Phones Click to Call}
The 8210 is priced above $50.00 making it orderable with our 5% off everyday sale at shopetsonline.com. Just use code 5off at checkout to get an additional 5% off your subtotal.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/28/cat-pumps-8210-coupler-assembly/
The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps, that is made to be the replacement on your pressure washer that requires a 3 gallon per minute flow rate at a maximum pressure of 2500 PSI.
This HR3025-111H pump can pump water up to 80 degrees making it perfect for almost any cleaning situation you and your pressure washer get into. Great for cutting grease and dirt from any surface.
HR3025-111H is a triplex ceramic plunger pump from Giant Pumps
The HR3025-111H is a triplex ceramic plunger pump from Giant Pumps has the following specifications:
- Volume on the HR3025-111H is 3.0 GPM
- Maximum Discharge Pressure of the HR3025-111H is rated at 2500 PSI
- Maximum Discharge Pressure (HR3030) is 3000 PSI
- Maximum Inlet Pressure is Up to 90 PSIG1
- The RPM of the unit is 3450
- Plunger Diameter measures at 16mm
- Stroke of the pump is measured at 5.9mm (8.0 o angle)
- The Crankcase Oil Capacity is 4.5 fl. oz.
- Operating Temperature of Pumped Fluids Up to 80 F
- Inlet Port on this pump measure 1 x 1/2″ NPT
- The Discharge Ports measure 3/8″ NPT
- Shaft Rotation is Clockwise
- Weight of this unit is only 11.4 lbs.
- Width of the overall pump is 6-7/16″
- Height on this pump is 10-1/4″
- Swash Plate Bore of the HR3025-111H measures 3/4″x3/16″ Keyway
- Swash Plate Bore of the (HR3030) measures 1″x3/16″ Keyway
- Valves are made of Polyamide Plastic
Want to fix and already owned pump like this from Giant Pumps? Go to our repair and breakdown manual page and find this unit or any Current Giant Pump on the market today, to see it’s repair parts and kits by clicking here.
Not sure if the HR3025-111H is the right pump for your machine? Give us a call and a Giant Pump Specialist will be glad to assist you with any questions. We are here M – F 7:30 am till 4:00 PM EST. Call 1-877-824-7763 {Smart Phones Click to Call}
This unit does qualify for our everyday sale of 5% off $50.00 or more. At checkout just add the coupon code “5off” into the coupon field to get and extra 5% off this unit, and anything else you order with it!
Permanent link to this article: https://etscompany.com/wordpress/2017/09/27/giant-pumps-hr3025-111h-triplex-ceramic-plunger-pump/
The Annovi Reverberi Replacement Pump RQV2.5G24D-EZ which can also be identified as RQV25G24D-EZ is a horizontal type unit for a pressure washer that requires a flow rate of 2.5 gallons per minute with a maximum PSI rating of 2400.
This RQV2.5G24D-EZ pump spins at 3400 RPM connecting to a 3/4″ shaft and works on a gasoline powered engine. The pump has a built in chemical injection system as well as a pressure control valve. The unit comes with an EZ start and thermal relief valve standard.
RQV2.5G24D-EZ
The RQV2.5G24D-EZ pump has the following Specifications:
- A Max. Volume flow rate of 2.5 GPM
- The Max. Discharge Pressure of 2,400 PSI
- a Max. Pump Speed that spins 3,400 RPM
- The Shaft Diameter that measures 3/4” Hollow
- This pump has a Maximum Horsepower Requirement of 5.9 GHP
- The Inlet Ports are 3/4″ GHA (garden hose)
- With Outlet Ports that measure 22mm-14 (Twist Connect)
- The pump weighs in at 6.5 lb.
The features of the RQV2.5G24D-EZ are as follows:
- 3-Piston alternating volumetric pumps for use on cleaning units
- Can be directly coupled to gas engine flange
- Fits most homeowner type horizontal pressure washers
- Horizontal Mount with Gas Flange 3-6 HP (2-9/16 center to center)
- Pump body in die-cast aluminum alloy
- Pistons driven by swash plate mechanism
- Two bearing systems, to support the pump shaft and pistons
- Pistons in hardened and tempered steel
- Pump head in aluminum
- Intake valves fitted above the pistons for greater efficiency
- Integral regulating valve
- Integral detergent suction system
Not , sure if this is the correct pump for your pressure washer? Give us a call toll free and an Annovi Reverberi Pump specialist will be glad to help you out. Call 1-877-824-7763 {Smart Phones Click to Call}
Ready to get back up and running? Order the pump here on our eCommerce site.
This pump does qualify for our everyday special of 5% off $50.00 or more. Simply put the code “5off” in the coupon field at check out and you will get the discount.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/26/annovi-reverberi-replacement-pump-rqv2-5g24d-ez/
The LANDA Part # 8.711-293.0 Soap Nozzle Wand, is specifically designed to work with most LANDA pressure washers past and present. It is the perfect pressure washer accessory to make your cleaning jobs go smooth and easy, with or with out soap or chemical.
8.711-293.0 is a wand replacement, that will withstand any cleaning situation you can think of to test it. It connects quickly and easily to your LANDA hot or cold pressure washer.
8.711-293.0 soap wand for Landa
Not sure if the 8.711-293.0 soap wand for Landa is the right item for your machine? Give us a call toll free and a LANDA specialist will help you determine the right wand for your unit to get you back up and running fast. Call 1-877-824-7763 {Smart Phones Click to Call}
You can also check our LANDA repair / parts breakdown manuals to see if this is the correct replacement wand for your pressure washer by clicking here and finding your units manual.
Ready to order the 8.711-293.0? Do so, easily and safety online at our eCommerce store by clicking here.
Also don’t forget all orders at shopETSonline.com that are over $50.00 are available for a discount. If your order is over $50.00 use the coupon code “5off” at check out to get 5% off!
Permanent link to this article: https://etscompany.com/wordpress/2017/09/25/landa-part-8-711-293-0-soap-nozzle-wand/
Pressure Washer Pumps On Sale! Some of the top brand names at the lowest prices anywhere! Limited quantities on these units. Basically our cost to you on a few Hypro and Comet Pumps.
These Pressure Washer Pumps are new and in good working order, we just have an over flow of them. So we are giving our savings to you the customer. A few of the units are no longer available anywhere else.
Pressure Washer Pumps On Sale!
Here are the 5 pressure washer pumps we have on sale as of 9/22/2017:
The Hypro Pumps – 9513P – CENT PUMP-FLANGE MOUNT are not being made anymore and we have the last two here at awesome prices. Get it before you can’t anymore!
Prices are only good while supplies last, once they are gone items will be removed or go back to original price.
Find repair kits for these pumps by going here.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/22/pressure-washer-pumps-sale/
K06 also known as General Pumps kit 6 is the complete piston and bolt assembly repair kit for most general pumps on the market today, used on a host of top of the line pressure washers. If you pressure washer is running a general pump, odds are this is the piston bolt kit you need to fix it.
The K06 repair kit contains everything you need to repair three cylinders on your general pressure washer pump.
k06 – kit 6 piston and bolt assembly
Need to be sure you are ordering the right repair kit for you pump? Find your general pump repair manual (also called a pump breakdown) by clicking here. Once you find your pumps manual look to see if the K06 is the repair kit you need for your cylinders.
The K06 Kit contains the following repair items:
- 3 O-rings that measure (0.426 x 0.070) part number 90.3585.00
- 3 of the Washer (M14) part number 96.7286.00
- 3 Ring (back up) part numbered 90.5067.00
- 3 of the Washer part number 96.7280.00
- 3 Screws (plunger) with a part number 47.2195.66
Not sure if this repair kit is the right item for getting you back up and running? Give our General Pump specialist a call and we will be happy to assist you in determining the correct kit for your piston repair. Call 1-877-824-7763 {Smart Phones Click to Call}
As always remember that if your order is over $50.00 you can add the coupon code “5off” to get 5% off your subtotal.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/21/general-pumps-kit-6-k06-piston-bolt-assembly/
Part # PULSAR4KHPEZ is a General Pumps unloader replacement part that is used on pumps for your pressure washer that require 10.5 gallon per minute flow rate with a maximum pressure rating of 4500 PSI.
This unloader PULSAR4KHPEZ is a trapped pressure type unit, that is used on most General Pumps and pressure washers that use these types of pumps. It is a blue spring type in the PULSAR4 series and comes standard with and EZ start knob and valve.
PULSAR4KHPEZ unloader
This PULSAR4KHPEZ unloader has the following specifications:
- The maximum GPM is rated at 10.5 GPM.
- The unloader is Rated at 4050 PSI.
- The Max. PSIof the unit is 4500.
- This unloader has an Inlet measurement of 2 x 3/8″ NPT.
- Outlet on this unloader is 3/8″ NPT.
- Bypass of the unit is measured at 2 x 3/8″ NPT.
- The Max. operating temperature of the unloader is 195 Degrees Fahrenheit.
Please check your General Pumps repair manual or parts breakdown here to determine of the PULSAR4KHPEZ unloader is the correct replacement unit for your pressure washer by clicking here and finding your pump model.
Not sure if this is the correct item for your pump and machine? Give us a call toll free and a General Pump Specialist will be glad to assist you in determining the correct unloader for your pump. Call 1-877-824-7763 {Smart Phones Click to Call}
If you are sure the PULSAR4KHPEZ unloader is the correct piece for you pressure washer pump them order it securely by clicking here.
Also, remember that we always offer one of the best coupon codes around that never expires. Use code “5off” to get 5% off any order that is over $50.00.
Permanent link to this article: https://etscompany.com/wordpress/2017/09/20/general-pumps-pulsar4khpez-unloader/
