Tag: accessories

Comet Pumps – 8108.2532.00 Unloader – VRT-3

Comet Pumps - 8108.2532.00 Unloader - VRT-3

The Comet Pumps – 8108.2532.00 Unloader – VRT-3, is a pressure regulator that senses when your pressure washer pumps gun is in the standby or off position.  It diverts excess pressure into a bypass mode so no damage from excessive pressure gets to your pump. This Comet Pumps – 8108.2532.00 Unloader – VRT-3 is rated …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/30/comet-pumps-8108-2532-00-unloader-vrt-3/

Cat Pumps 34053 Seal kit for 2SF pumps

The Cat Pumps 34053 Seal kit for 2SF pumps is the most common seal kit for 2SFX and 2SF Pumps that are made by CAT.   When there is leaking in your pump the seals are the first thing you should look into.  They are the easiest thing to wear but luckily the easiest thing to …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/27/cat-pumps-34053-seal-kit-2sf-pumps/

General Pumps – K04 – KIT 4 – Valve Brass Caps

The General Pumps – K04 – KIT 4 – Valve Brass Caps is one of the most common repair kits made for general pumps.  It’s used primarily on the T and TS series of pumps made by general. This General Pumps – K04 – KIT 4 – Valve Brass Caps come in a kit that has …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/25/general-pumps-k04-kit-4-valve-brass-caps/

CAT Pump 7535 Pressure Unloader

CAT Pump 7535 Pressure Unloader

The CAT Pump 7535 Pressure Unloader is designed for CAT Pumps that have a maximum flow rate of 21 gpm at a PSI of 4000.  The minimum PSI is 800.  Then unloader is for a single or multiple pump set up with either a weep or multiple nozzle machine. This unit relays on a 5 …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/23/cat-pump-7535-pressure-unloader/

Annovi Reverberi Accessory – AL-QCOKIT3/8

Annovi Reverberi Accessory - AL-QCOKIT3/8

The Annovi Reverberi Accessory – AL-QCOKIT3/8 is an o-ring kit, that comes with 25 o-rings that measure 3/8″.  These o-rings are used in a number of places on a number of different pressure washer pumps from Annovi Reverberi. This Annovi Reverberi Accessory – AL-QCOKIT3/8 seen above is made of Buna Rubberized material for long lasting …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/20/annovi-reverberi-accessory-al-qcokit38/

Annovi Reverberi Unloader – VR54-200

Annovi Reverberi Unloader - VR54-200

The Annovi Reverberi Unloader – VR54-200 is a red knobbed unloader for your pressure washer pump from AR pumps that requires a unit with a maximum volume of 8 GPM at a maximum PSI of 2900.  If your pump specs meet these requirements this is the unloader for you. Annovi Reverberi Unloader – VR54-200 is …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/18/annovi-reverberi-unloader-vr54-200/

LANDA High Limit Switch 8.712-297.0

LANDA High Limit Switch 8.712-297.0

The LANDA High Limit Switch 8.712-297.0 is rated for 230 Degrees and has a 42″ wired lead.  This pig tailed switch is and OEM from LANDA that will work on most machines it makes, and is easy to install. This LANDA High Limit Switch 8.712-297.0 runs as the safety device that will shut off your …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/16/landa-high-limit-switch-8-712-297-0/

SUTTNER ST-36 SLUDGE PUMP 6.0 KIT

SUTTNER ST-36 SLUDGE PUMP 6.0 KIT, is the perfect item for moving large amounts of slurry or water in a very short period of time.  All you have to do is attach a hose from a portable pressure washer or even a car wash bay, and the water that starts flowing through this high pressure …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/11/suttner-st-36-sludge-pump-6-0-kit/

Cox Reels 117-3-250 Hand Crank Hose Reel

117-3-250 hose reel

The cox reels, hand crank reel 117-3-250 is a state of the art hose reel for industrial and commercial applications.  It’s rugged design makes it perfect for any pressure washing situation you can think of. The 117-3-250 reel from cox reels will hold up to 250 feet of high pressure hose, making your ability to …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/10/cox-reels-117-3-250-hand-crank-hose-reel/

Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI

Pressure Washer M407 TRIGGER GUN 7GPM 4000PSI

The M407 Trigger Gun is a 7 gallon per minute at 4000 PSI spray attachment for your pressure washer.  Without a quality trigger gun your pressure washer is all but useless. M407 TRIGGER GUN is one of the more versatile items on the market today, made with long lasting parts to give your pressure washer …

Continue reading

Permanent link to this article: https://etscompany.com/wordpress/2017/10/02/pressure-washer-m407-trigger-gun-7gpm-4000psi/